Technicoat Ltd - Distributor for ICA and Salchi Wood Coatings

Technicoat Ltd market a high quality advanced range of coatings designed for the Wood and Metal working industries.

Polyester, Polyurethane, Acrylic and Water based coatings are imported from Italy.

We also distribute metal coatings from BASF Germany.

Using the latest technology we have a computerised and manual colour mixing system and we are able to mix and match a complete spectrum of colours.

We stock a range of Polyesters for a high build stable surface, ideal for the full gloss finish.

The polyester base coat can be over coated with polyurethane or acrylic coatings to achieve either a gloss, satin or matt finish.

• High Build Finish
• Fast Process Time
• Excellent Hardness
• Stable Long Lasting Full Gloss Finish
• Excellent Solvent, Moisture, Heat and Stain Resistance

The high build coat on coat system can be polished to a high gloss mirror finish.

High in solids, dry to a silky smooth finish due to their excellent levelling out qualities and have an excellent long lasting quality finish.

• Wears 10 times longer than A/Cs or Pre-Catalised Lacquers
• Hard wearing smooth finish
• Excellent solvent, moisture, heat and stain resistance
• No formaldehyde
• Easy application
• High in solids

Our coat on coat finish is excellent for commercial use such as furniture, bars, restaurants, kitchens etc.

The acrylic coatings are bio-component which are easy to use.

A very durable coating with a lower build than polyurethanes, ideal for light wood and maintains the intrinsic beauty of the wood.

The UV filters give this coating an excellent resistance to yellowing.

Available in Natural Wood Finish, 5%, 10%, 15%, 25%, 35%, 50% and Full Gloss.

• Non Yellowing
• Fast Drying
• Will not Bloom
• Excellent Adhesion
• No Critical Over Coating Time
• Excellent Scratch Resistance
• Very hard wearing, 10 times longer than A/Cs or pre-catalysed coatings

The Salchi Primers are High Build compliant coatings in White and Black are used to prepare the surface of MDF and solid woods ready for over coating with a pigmented finish.

The excellent High Build of this coating means that one coat is usually enough to prepare the surface of MDF and wood ready for over coating.

• Very Fast Drying
• Easy to cut back without clogging paper
• Compliant Coating Low in VOCs
• High in solids
• Good adhesion to all surfaces

Two pack high build sanding sealer is very flexible giving uniformity to the surface ready for the top coat.

The main characteristic of this coating is its excellent transparency and adhesion.  It has no critical over coating time.

• Fast Drying
• Easy to cut back without clogging paper
• Excellent filling power
• High in solids and low in VOCs
• Excellent Adhesion 
• Excellent Transparency

We have a computerised and manual mixing system developed by Salchi.

We are able to mix a whole spectrum of colours.  Any colour can be mixed to order.
All colours are available in 5 gloss levels, 5%, 20%, 35%, 50% and full gloss.

These coatings are high in solids with an excellent covering power, fast drying and are non-yellowing. They give the best possible protection to wood and MDF whilst remaining flexible.

They are long lasting and not prone to cracking with the grain over time. They are hard wearing, non-yellowing and durable and have a permanent resistance to water.  Consequently they are ideal for use on kitchen and bathroom furniture etc.

Imported from BASF in Germany they are 2 pack polyurethane coatings, high build and both primer and top coat are pigmented and are available in semi gloss or full gloss.

We have a range of additives:

• Glass adhesion promotion
• Plastic adhesion promotion (for metal)
• Floor Additives
• Brush and Roller additive (for metal)
• UV Additive
• Tinting Stains
• For Polyester a flexibility Additive and Anti-Greening Accelerator

" For Further Information CLICK HERE "

Don't Forget To Mention You Have Found Us On Applegate Directory