Tempcon Instrumentation Ltd - The Tempcon 'Profile'

Established in 1980 Tempcon Instrumentation Ltd specialises in instrumentation and sensors (probes) for Measurement, Control and Data Logging of temperature, humidity, pressure, voltage, current, energy (kWhs), wind speed/direction, soil temperature, and most environmental conditions.
We offer an incredible range of Data Loggers, Chart Recorders, Digital Thermometers, Process Controllers, Signal Conditioners, Panel Indicators, Energy Loggers, Weather Stations, Thermocouples, Rtd's, PT100 Probes, and Thermistor Probes for use in environmental monitoring, manufacturing, food processing, logistics, and University research projects..
We provide repair and calibration using equipment calibrated and traceable to UKAS.
Our own Quality System is accredited to BS EN 9001:2008 by National Quality Audits.
At Tempcon Instrumentation we offer application advice, and instrumentation + sensor solutions to suit the application – be it a hand-held or a fixed industrial, research, or field installation.

With 30 years of consistent practical experience behind us we are able to provide the complete Measurement, Control, or Data Logging solution,

We manufacture: Thermocouple, Thermistor, and Platinum Resistance RTd, PT100, PT1000, temperature Probes.

We are Official Distributors (and offer service & calibration) for:

Action Instruments: Signal Conditioners
Acksen: Electrocorder Energy Loggers
Ametek/Jofra: Dry Block Calibrators
Dickson: Chart Recorders & Data Loggers
DataTrack Process Instruments: Panel Indicators & Signal Conditioners
Digitron: Temperature & Humidity Instrumentation
Eurotherm: Chart Recorders & Process Controllers
Grant Instruments: Squirrel Data Loggers
Hanwell (IMC): Wi-Fi Temperature & Humidity Dataloggers
Jules Richard Instruments: Chart Recorders
Onset Computer Corp: HOBO Temperature, RH, Voltage, Current, Energy, & Weather Station Data Loggers.
West Instruments: Temperature & Process Controllers
Status Instruments: Signal Conditioners & Transmitters

80% of all food store, and restaurant, food temperatures are carried out using hand-held digital thermometers.

As instrumentation suppliers to well known high street food supermarket giants for over 20 years we know a thing or two about measuring food temperatures.

Our digital thermometers are low-cost, easy to use, and are available with easily replaceable low cost probes.

Available as single thermometers with single probes to meet your requirements they are also available in easily recognisable 'food hygiene kits' with penetration (core temperature), air temperature, and between pack probes to suit the application.

If you are looking for even lower cost our range of fixed probe thermometers start at just a few Pounds.

If infrared, or Wi-Fi wireless, or data logging is called for - we have that too.

Food temperature has been our business for over 30 years!

Tempcon are official long-term UK distributors of HOBO Data Loggers, Energy Loggers, and Weather Stations, 

All HOBO loggers sold in the UK are sourced via Tempcon. 

HOBO loggers are small, battery operated, and convenient to use. An extremely wide product range offers both wireless and conventional loggers for use in industry, environmental research, electrical energy monitoring, and food processing, food retail, and logistics.
Measurements include: Temperature, relative humidity, state, event, wind speed, wind direction, soil moisture, solar radiation, kWhrs, voltage, and current.

Miniature loggers, single channel, multi-channel, internal sensors, external sensors, waterproof for outside use, or dedicated underwater loggers for temperature, level and pressure - the product list is extensive. 

Outdoor use Weather Stations measure all of these parameters plus rain level, wind speed, wind direction, solar and soil conditions. 

Energy loggers monitor current and voltage levels and calculate kWhs in order to help with supply and load problems.

With very low prices no measurement or logging problem is too great or too small.

 

 Dickson Means Data Measurement.

As Official distributors Tempcon offer the full range of 3”,4”,6” and 8” Circular Chart Recorders. Many Dickson recorders offer not only alarms and relays but precise digital displays for clear interpretation of measured values. Although paper recorders have many practical applications in industry and research many of the Dickson recorders are designed specifically for medical use such as Blood-Banks, Vaccine, or Tissure recording.

The NEW Touchscreen Recorder combines many of these features and applications in a large 'touchscreen' recorder measuring temperature and relative humidity with USB and FLASH card data download.

Dickson also offer a range of single, and multi-channel, data loggers with large clear displays recording temperature, relative humidity, or events.

 A unique and useful feature of many Dickson recorders, and loggers, is the ability to download measured data to a removable FLASH Card.
 

Tempcon represent Hanwell (IMC) as official distributors.

With a unique range of wireless dataloggers measuring temperature, relative humidity, events, state, shock, voltage and current and the emphasise on wireless, Hanwell dataloggers are particularly suitable for monitoring critical situations in museums, warehouses, transport, and warehouse storage conditions.

NEW

For the first time, the iSense range incorporates wireless GPRS technology that enables remote monitoring of diverse parameters on buildings, machinery, infrastructure or vehicles, even in locations that previously seemed inaccessible.

Monitor any parameter with iSense including; energy, temperature, humidity, pressure, structural stress etc..
 

Electrocorder Loggers monitor voltage and current load, then calculate kWh costs.
What is the cost of using an appliance? What are the costs of supplying my factory, hospital, museum, workshop with electricity? What are the load problems and where can I save money?
All of these questions can be resolved by using an Electrocorder.

Electrocorders are a range of AC & DC Voltage, Current, and Energy recorders enabling users (such as facility, and plant Managers) to check loading and voltage performance, as well as perform power and energy surveys.
Most models are available at several ratings suitable for single phase, or three phase circuits, or transformer loading.

Sometimes it is enough to record only voltage, or only current. The extensive product range offers dedicated voltage only, or current only, logger/recorders to enable users to make practical measurements at the most economical cost.
 

6000 Series Chart Recorders fit a wide spectrum of applications and offer unrivalled input accuracy with a 125ms total sample rate for up to 48 input channels. Input channels are freely configurable to suit process requirements. The recorders have an intuitive, touch screen display to enable the operator to clearly view process data in varying formats.
6180A Recorders have onboard Flash data storage capability, Ethernet communication and choice of Compact Flash or SD Card. Data is stored in a tamper resistant binary format that can be used for secure, long term records of your process.

394 Circular Chart Recorders, with annotation, are clear leaders in chart technology. The 394 can monitor up to 6 simultaneous inputs and combines four colour printing with annotation to produce a clear and easy to read chart.
The recorder is fully configurable from the front panel or via the optional PC card reader.
Up to two independent controllers can be added enabling the 394 to control as well as record the process. Modbus communications make this instrument a very flexible component in a system or network solution.
 

We offer a wide range of thermocouple, PT100/1000, and thermistor temperature probes for many different applications in industry, environmental research, and food. 

Many parameters can affect the choice of probe such as temperature, cable, sheath diameter, length, and hand-held or fixed installation.

Probes are available in all the normal K,J,T,N,S,R thermocouple materials, Pt100 or Pt1000 platinum resistance, or thermistor bead.  Industrial probes with cable, threaded boss, or weatherproof head. Hand-held probes with choice of handle and coiled or normal cable. A range of plugs, sockets, and 2-wire transmitters compliments the product range.

Tempcon Instrumentation can offer practical advice and will build probes to meet your specific, or chosen specification. A large selection of hand-held food probes can be supplied from stock. 
 

Well established in the process control field we offer Process Controllers from West Instruments, and Eurotherm. Todays process controllers can be simple to employ but complex in specification – turn to the experts Tempcon Instrumentation for application advice and configuration before delivery.

Controllers from both manufacturers are availble in 1/32, 1/16, 1/8, and 1/4 DIN panel sizes with the full range of thermocouple, RTd, and voltage & current inputs, and full communication outputs.

Datatrack, West, and Eurotherm Panel Indicators are available from us in similar panel sizes again with the full range of inputs and outputs.

As we all know every process requires a sensor. We would remind you that Tempcon will manufacture probes and sensors to meet your specific application requirement, in any quantity.
 

We offer a range of easy to use low cost compact, 2-Wire in-head transmitters for use with thermocouple, or PT100 sensors.

Easily calibrated the transmitters are available with 0-20 mA, 4-20mA, or voltage outputs and will locate inside our normal Weatherproof Head Probes.  

Official Distributors for Action Instruments.

A proven range of innovative DIN Rail and In-Head signal conditioners comprising isolators and trip alarms with inputs for AC/DC volts, AC/DC current, RTD's, and thermocouples from Action Instruments, backed by Eurotherm (Invensys group) offering Signal Conditioning, Isolation, Alarms, and Power Supplies with PC or Button Setup and Calibration, and Ethernet connectivity.
 

Our Quality System is registered to BS EN 9001:2008, and our in house calibration equipment traceable to UKAS.

We can calibrate your temperature equipment before we ship to you, or as part of an annual calibration program. Alternatively as
Distributors of Ametek Dry Block Calibrators we can offer you portable, accurate, calibration equipment enabling you to easily calibrate your own instrumentation and probes on-site.

Dry Block calibrators are easy to use, and are available in several temperature ranges, with UKAS certificates.

 Contact our Sales Office to discuss models.