Cooling Parts and Services Ltd - Cooling Parts and Services Ltd

) (cps™‘ close association with Evapco Europe NV make us the quickest delivery of replacement coils irrespective of the original equipment manufacturer. If coils are required for Evaporative condensers or closed circuit fluid coolers we can provide both Hot Dip Galvanised and Stainless steel coils.

) (cps™ can also offer the unique Thermo-Pak coil configuration which is staggered in the direction of airflow and oval in cross section, this results in very high heat transfer coefficient and optimum efficiency. All coils are subject to tight quality control and compliant to the European “Pressure Equipment Directive” (PED) 97/23/EC and provided with certification.

Series AT represents decades of engineering excellence and is specifically designed for ease of access for maintenance, high durability, optimum efficiency and low power consumption. The AT is an induced draught unit available with special low noise fans and water noise absorbers for sensitive sites. The ULRA AT version combines all these features with AISI 316 stainless steel basin and AISI 304 stainless steel casing.

Download AT/UAT catalogue

) (cps™ , due to its alliance with Spig S.p.A. undertake design, manufacture, supply construction and commissioning of Air Cooled Condensers to be used on Power Plants for direct cooling and recovery of steam from the turbine exhaust to produce boiler feed water.

They adopted a Patented ACC anti freezing system with a primary condensing tube bundle with an integral dephlagmator.

Primary condensing takes place in tubes of different geometrics where the steam and condensation flow in the same direction; final condensation occurs in reflux, where the condensation travels downwards in one direction and the steam rises upwards in the other. The deflagmator is situated below the pre-condenser thus producing a twofold positive effect which avoids any flowback and heating risk of the environmental air before it meets the tubes of the primary section.

) (cps™ have in-house expertise to provide a consultancy service related to all issues in respect of water cooling towers and their application.

) (cps™ will review the process demands and as dictated by client requirements conduct a detail design study to optimise the performance of a cooling tower to meet both system and environmental requirements. This may require special considerations be taken to limit noise level, plume control and / or achieve required energy conservation measures.

) (cps™ is able to provided assistance from conception to project completion and ongoing maintenance. Our degree of involvement can be as little or as much as client desires.

) (cps™ will establish the cooling demands, write a comprehensive technical specification and scheme for an enquiry, provide an unbiased independent appraisal of tenders, if required we can maintain QC /QA of the supply, act as clients engineer during construction, supervise commissioning, write a maintenance programme etc etc.