Huba Control AG Branch Office UK | Pressure Switches | Pressure Tansmitters Manufacturer.

Pressure range: 0 ... 100 mbar | Mediums - Air and neutral gases
 

The type 400 pressure transmitter, with its proven ceramic lever technology, has adjusted temperature compensated sensor signals and is available with a voltage output. The (VDC) voltage output is an amplified, linear signal suitable for direct processing in electronic control systems. The sensors are ideal for continuous level measurement in washing machines, dishwashers etc.

[more to this pressure transmitter type 400]

Pressure range: –1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

The pressure transmitter of type 500 with proven ceramic technology, features adjusted and amplified sensor signals which are available as standardized voltage or current outputs. Various application-specific pressure and electrical connections can be provided

[more to this pressure transmitter type 500]

Pressure range: -1 ... 0 bar / 0 ... 60 bar | Mediums - Fluids and gases
 

The pressure transmitter of type 501 with proved ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs. Various application-specific pressure and electrical connections can be provided

[more to this pressure transmitter type 501]

Pressure range: 0 ... 25 bar | Mediums - Fluids and gases
 

The relative pressure transmitter of type 503 with proved ceramic technology features, adjusted and amplified sensor signals which are available as standardized voltage outputs. Designed for large batch production in OEM applications.

[more to this pressure transmitter type 503]

Pressure range: 0 ... 4 bar | Mediums - Fluids and gases
 

The pressure transmitters of type 505 are measuring components for the measurement of pressure. They are suitable for analysing water pressure ratios in heating- and industrial circuits. The novel ceramic measuring element with its included electronic gives a calibrated, amplified voltage signal.
 

[more to this pressure transmitter type 505]

Pressure range: -1 ... 60 bar | Mediums - Refrigerants
 

The pressure transmitter type 506 with proven ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs. Specially developed for use in the industrial refrigeration technology.

[more to this pressure transmitter type 506]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

The pressure transmitter of type series 507 with its proven ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application specific pressure electrical connections can be provided.

[more to this pressure transmitter type 507]

Pressure range: 0 ... 600 bar | Mediums - Refrigerants
 

These compact OEM pressure transmitters type 510 have been developed for applications in the industrial refrigeration technology. The special sensor is based on thick-film technology, developed by Huba Control, which utilises a special grade of steel welded to the pressure sensor. This means that the 510 can be used for all gases and media in refrigeration, including ammoniac. Highest requirements concerning EMC and accuracy for all temperature ranges can be met in combination with the unique integrated electronic design.
 

[more to this pressure transmitter type 510]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

These compact OEM pressure transmitters type 511meet the highest specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particularly suitable for all demanding industrial applications. This sensor utilises a ceramic technology, developed by Huba Control and for the last 10 years, in millions of applications, used in combination with unique integrated electronic design, means that the type 511 series has a high degree of accuracy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio.

[more to this pressure transmitter type 511]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

These compact OEM pressure transmitters type 515 meet the highest specification for mechanical stress, EMC compatibility, and operational reliability. This sensor utilises a ceramic technology, developed by Huba Control and for the last 10 years, in millions of applications. Used in combination with unique integrated electronic design, means that the type 515 series has a high degree of accuracy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio. IP69K protection as standard.
 

[more to this pressure transmitter type 515]

Pressure range: -1 ... 0 bar / 0 ... 16 bar | Mediums - Fluids and gases
 

This pressure transmitter is based on ceramic technology, developed by Huba Control and used for the last 10 years, in millions of applications. Used in combination with a unique integrat¬ed electronic design, this gives the type 516 a high degree of accuracy for all temperature ranges. This technology with an amplified ratiometric output signal, supports direct assembly without the need for the user to adjust for temperature or pressure.

[more to this pressure transmitter type 516]

Pressure range: 0 ... 2.5 - 600 bar | Mediums - Fluids, gases and refrigerants
 

The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. This pressure transmitter meets the high burst protection demands and is suitable for the use in all types of refrigerants inclusive ammonia. ATEX Approved

[more to this pressure transmitter type 520]

Pressure range: -1 ... 0 - 60 bar | Mediums - Fluids and gases
 

The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These transmitters are suitable for applications across a broad spectrum of industries

[more to this pressure transmitter type 528]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

The µP-regulated, programmable pressure switch type 619 has a robust industry design. Parameters can easily be programmed with three different configuration menus. All systems are equipped with a diagnostic function. Pressure is measured by a high resistant ceramic element. Normed analogue and / or open collector outputs are available depending on the version chosen

[more to this pressure transmitter type 619]

Pressure range: 0 ... 8 mbar | Mediums - Air and neutral gases
 

The type 401 pressure transmitters, with its unique proven ceramic lever technology, has adjusted, temperature-compensated sensor signals, available as a voltage output. The (VDC) voltage output is an amplified, linear signal suitable for direct processing in electronic control systems.

[more to this differential pressure transmitter Type 401]

Pressure range: 0 ... 50 mbar | Mediums - Air and neutral gases
 

The pressure transmitters of type 402 with their proven ceramic fulcrum lever technology have adjusted, temperature-compensated sensor signals that are available with voltage outputs.
They are ideally suited for registering fine air flow in air conditioning technology and for measuring fine pressures in the environmental / medical technology sectors.
 

[more to this differential pressure transmitter type 402]

Pressure range: 0 ... 8 mbar | Mediums - Air and burnable gases

The pressure transmitters of type 403 are outlined for the optimization of calorific values in gas fired heating systems. All materials used are compatible with burnable gas. In combination with the differential pressure transmitter type 401 a electronic air gas-compound can be realized. The type 403 series pressure transmitters, with its unique proven ceramic lever technology, has adjusted, temperature-compensated sensor signals, available as a voltage output. The (VDC) voltage output is an amplified, linear signal suitable for direct processing in electronic control systems.

[more to this differential pressure transmitter type 403]

Pressure range: 0 ... 1000 mbar | Mediums - Fluids and gases
 

The pressure transmitter of type 652 are used for the long- and shortdistance transmission of electrical pressure-proportional signals. They are specially suited for the continuous level or flow monitoring of neutral and slightly aggressive liquids and gases in heating, ventilation and process technology. The pressure or differential pressure to be monitored acts on a diaphragm, which in turn acts against a spring. As a result of the pressure action and the resultant diaphragm movement a permanent magnet fastened on the diaphragm moves in the direction of a hall sensor arranged outside the pressure case. This sensor emits an electrical signal which is proportional to the magnetic field. The signal is linearized, compensated and amplified.

[more to this differential pressure transmitter type 652]

Pressure range: -5 ... 5 mbar / 0 ... 2000 mbar | Mediums - Air and neutral gases
 

The pressure transmitter of type 663 have calibrated and temperature compensated sensor signals which are available as voltage output. The amplified linear voltage output signal, can be connected directly into an electronic control system. The transmitter can be mounted directly due a pcb board or with a 2.5 mm plug connection.

[more to this differential pressure transmitter type 663]

Pressure range: 0 ... 25 bar | Mediums - Fluids and gases
 

The pressure transmitter of type 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application specific pressure and electrical connections and housing materials suitable for different media can be provided.

[more to this differential pressure transmitter type 692]

Pressure range: -0.5 ... 0.5 mbar / 0 ... 50 mbar | Mediums - Air and neutral gases
 

The pressure transmitters of type 694 incorporate a proved ceramic fulcrum lever technology. They deliver adjusted temperature-compensated sensor signals, available as standard voltage or current outputs. They are ideal for registering low air flow in air conditioning systems and for the measurement of fine pressures in environmental, laboratory and cleanroom applications (air and non-corrosive gases).

[more to this differential pressure transmitter type 694]

Pressure range: -5 ... 5 mbar / 0 ... 10 000 mbar | Mediums - Air and neutral gases
 

The relative and differential pressure modules type 698 are suitable for monitoring pressure and flow in air conditioning systems and in the laboratory sector.
The modules are selectively available with two limit switches, display, square root extraction and standardised output signals. The built in pressure transmitters are our proven types 516, 402 or 663, depending on the pressure range.
 

[more to this differential pressure transmitter type 698]

Pressure range: -1 ... 1 mbar / 0 ... 50 mbar | Mediums - Air and neutral gases
 

The pressure transmitters of the Type 699 incorporate a proved ceramic fulcrum lever technology. They deliver adjusted temperature compensated sensor signals. They are ideal for registering low air flow in air conditioning systems and for the measurement of fine pressures in environmental, laboratory and cleanroom applications (air and non-corrosive gases).

[more to this differential pressure transmitter type 699]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

These compact OEM pressure switches type series 511meet the highest specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particularly suitable for all demanding industrial applications. This sensor utilises a ceramic technology, developed by Huba Control and for the last 10 years, in millions of applications, used in combination with unique integrated electronic design, means that the type 511 has a high degree of accuracy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio.

[more to this electronic pressure switch type 511]

Pressure range: -1 ... 9 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

The type 615 pressure switches measure pressure by means of highly resistant ceramic elements. An open collector (transistor) output accommodates loads up to 100 mA. Either an N/C or N/O contact may be used, and the upper and lower switching point can be freely selected in the range 5 to 100% fs. Various electrical and pressure connections are available to suit given applications.

[more to this electronic pressure switch type 615]

Pressure range: 0 ... 25 bar | Mediums - Fluids and gases
 

The type 616 pressure switches measure pressure by means of highly resistant ceramic elements. An open collector (transistor) output accommodates loads up to 100 mA. Either an N/C or N/O contact may be used, and the upper and lower switching point can be freely selected in the range 5 to 100 % fs. Various electrical and pressure connections are available to suit given applications.

[more to this electric pressure switch type 616]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

The µP-regulated, programmable pressure switch type 619 has a robust industry design. Parameters can easily be programmed with three different configuration menus. All systems are equipped with a diagnostic function. Pressure is measured by a high resistant ceramic element. Normed analogue and / or open collector outputs are available depending on the version chosen.

[more to this electric pressure switch type 619]

Pressure range: 0.2 ... 50 mbar | Mediums - Air and neutral gases
 

The type 604 pressure switch is used as a ¿P flow switch in ventilation ducts for the control of filters and fans, and in primary and secondary control systems for the control of air dampers. The 604 pressure monitoring switches are also ideally suited to protect heating coils from overheating and for monitoring industrial air cooling circuits. Medium: air and non-corrosive gases.

[more to this mechanical pressure switch type 604]

Pressure range: 20 ... 400 Pa | Mediums - Air and neutral gases
 

Type 605 pressure switches are specially developed for use in gas fired heating systems. There are more than 20 million pressure switches in use worldwide. Produced on a fully automated production line. High setting accuracy and reproducibility, combined with excellent reliability characterise a quality of switch above the industry norm.

[more to this mechanical pressure switch type 605]

Pressure range: -320 ... -1 mbar / 1 ... 500 mbar | Mediums - Fluids und gases
 

Differential pressure, vacuum, overpressure switches of type 610 are specially suited for monitoring non-explosive gases in the machine and industrial equipment building industry in general, in process engineering or as control and monitoring elements in packing lines. Finely adjustable switching points and switching differences even in the higher ranges with exemplary reproducibility.

[more to this mechanical pressure switch type 610]

Pressure range: 2 ... 220 mbar | Mediums - Fluids and gases
 

With their finely tuned range increments and long-term switching point stability, overpressure and vacuum switches of type 620/625 are suitable for monitoring liquids and gases in industrial equipment manufacturing applications in general, in process technology or in food automation. The rugged mechanics are the assurance of high operating reliability, even in the presence of percussions or vibrations. A range of switches with many standard versions and ideal price/performance ratio, even in the case of small quantities.

[more to this mechanical pressure switch type 620]

Pressure range: -900 ... -4 mbar / 2 ... 6000 mbar | Mediums - Fluids and gases
 

With their finely tuned range increments and long-term switching point stability, overpressure and vacuum switches of type 620/625 are suitable for monitoring liquids and gases in industrial equipment manufacturing applications in general, in process technology or in food automation. The rugged mechanics are the assurance of high operating reliability, even in the presence of percussions or vibrations. A range of switches with many standard versions and ideal price/performance ratio, even in the case of small quantities.

[more to this mechanical pressure switch type 625]

Pressure range: 6 ... 5500 mbar | Mediums - Fluids and gases
 

Differential pressure, vacuum and overpressure switches of type series 630 are suitable for monitoring neutral and slightly aggressive liquids and gases. Switching element isolated from medium. Ideal for use as flow monitor in sanitary piping/ heating installations or for level monitoring in general in process technology applications. Extremely rugged construction with high functionality due to 10/20 bar safety margin in both pressure chambers.

[more to this mechanical pressure switch type 630]

Pressure range: 0 ... 25 bar | Mediums - Fluids
 

The pressure transmitters of type 681 with piezoresistive measuring elements have compensated, adjusted and amplified sensor signals which are available as standard voltage or current outputs. In the immersion-sensor version with a salt water and oil-resistant connection cable they are specially suited for level measurement, even in the presence of corrosive liquids. The cable incorporates a tube for compensation of the ambient pressure. Manufactured from stainless steel, its welded construction provides a watertight seal.

[more to this pressure level transmitter type 681]

Pressure range: 0.8 ... 10 bar | Mediums - Fluids and gases
 

The OEM level sensing pressure transmitters type 700 are used for the level measurement in various media. The level measurement is made with an absolute pressure measuring cell. Therefore the pressure (barometrical) which influences the media must be specified. A second transmitter with a measuring range of 0.8 … 1.4 bar may be used. Depending on the application the information about barometrical pressure is available on the internet

[more to this pressure level transmitter type 700]

Pressure range: mbar/bar
 

The indicating devices type 800.8 without set point and 800.7 with 2 set points serve for indicating values. Input signals can be signal current or voltages originating from corresponding measurement transducers or measurement value acquisition systems. The 4 character indicating devices additionally, generate a current signal of for further signal evaluations. A limit value output with two independently no-volt bistable contacts is additionally integrated.

[more to this digital indicating devices type 800]

Pressure range: mbar/bar
 

Liquid crystal, 3 digit Character height 9.4 mm Indication capabilities Lowest Highest value: value: The series 801 display modules can be fitted on all DIN EN 175301-803-A connectors. Input signals can be signal currents or voltages from the associated transducers or measuring systems.

[more to this digital indicating devices type 801]

 Medium: Liquids | Flow range: 0.9 ... 150 l/min
 

The flow sensor of this range is based on the principle of Karman’s vortex trail. The shedding of vortices on the damming body in the flow is directly pro¬portional to the speed of the flow. A piezoelectric paddle detects the generated vortex and analyses the values with the integrated electronic. Versions with integrated temperature measurement are also available.

[more to this flow sensor type 200]

Medium: Liquids | Flow range: 0.9 ... 150 l/min
 

In comparison to the OEM flow sensor (type 200) the type 210 is available with a larger variety of power supply and output options. You can choose between various versions including integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and persuade by very little loss of pressure and a very high accuracy.

[more to this flow sensor type 210]

Medium: Liquids | Flow range: 1.8 ... 150 l/min
 

The flow sensor type 230 has a rugged construction of red brass. With no moving parts the flow sensor is not sensitive to debris, has marginal pressure loss and high accuracy. Versions with integrated temperature measurement are also available.

[more to this flow sensor type 230]

40 to 265 Centi-Newton
 

The type series 410 measures force with the cantilever beam by an integrated piezo-resistive wheatstone bridge with front-end amplification circuit. It uses hybrid thick film technology which guarantees an excellent stability and a long operating life. The special design of the force cell ensure batch production and with fully automated assembly an ideal performance to cost ratio for high quantities

 [more to this cantilever beam / force cell type 410]

Pressure range: 0 ... 250 bar | Mediums - Fluids and gases
 

This pressure measuring cell is based on ceramic technology, developed by Huba Control and used for the last 10 years, in millions of applications. Due to the very robust design of the ceramic cell there are no significant changes in the sensor characteristic when mounted by the customer.

[more to this pressure measuring cell type 509]

Pressure range: -1 ... 0 bar / 0 ... 600 bar | Mediums - Fluids and gases
 

This pressure-measuring cell is based on ceramic technology, developed by Huba Control and used for the last 10 years, in millions of applications, used in combination with a unique integrated electronic design, this gives the type 513 series a high degree of accuracy for all temperature ranges. This technology with an amplified ratiometric output signal, supports the direct assembly without the need for the user to adjust for temperature or pressure.

[more to this pressure measuring cell type 513]

Pressure range: 0.8 ... 1.4 bar | Mediums - Fluids and gases
 

This pressure measuring cell, barometric adjusted with protection case is suitable for plug mounting on PCB. The output signal is linear, temperature compensated and amplified. The robust construction guarantees a long term stable measuring result.

[more to this pressure measuring cell type 513 baro]

As a result of the heat sink it is possible to use medium with higher temperature.

The cooling section reduces the temperature of the hot media. Depending on the ambient temperature the use of medium with temperature of more than 200°C without harming the transmitter is possible.

Different standardised pressure connections allow the combination with the pressure measurement systems of Huba Control.

[more to this accessory]

• Permanent working on technologies which are suitable for the pressure measuring technique
• Conversion of technologies in market-or customer specific products with modern instruments (modelling / FMEA)
• Mastery of complex automation processes including automated calibration
• Practice and enhancements of the Management System concerning quality, environment and security
• In-house laboratory for the calibration of pressure measuring systems/appliances according to internationally approved norms (IEC / ISO 17025)
• Manufacture of small and large-scale production
• Highly skilled own front-line sales Engineers and distributors for technological complex applications in the sectors switches, transmitters and sensors
• Market compatible and innovative products as well as dependable proximity to the customer in the OEM-branch
• Open communication internaly and externaly
• Work in close partnership with our customers as the basis for a lasting, joint success

For more information on Huba Control AG Branch Office UK

Don't forget to mention you have found us on Applegate Directory