Phytron UK Ltd
Caversham Park
Reading
Berkshire
RG4 6RA ( Road Map )
Tel: 0118 946 2132
Fax: 0118 947 3059
Number of Employees: Unavailable
info
phytron.co.uk
Vacuum Steppers
Phytron’s VSS stepper motors are the result of more than 30 years of experience in space technology. The specially designed two phase, hybrid stepper motors can be used in vacuum environments up to 10 exp (-11) hPa. They are optimal for extraordinary environments such as deep and high temperatures or extreme radiation intensity.
Space Motors
Phytron supply a variety of stepper motors for operation in vacuum and space.
Our space motors are suitable for a range of applications and temperatures. Visit our website to see the range available or contact us for further information.
Stepper Motors and Control Devices
Pythron supply one of the largest existing ranges of stepper motors and power end levels for stepper motors. Our customers benefit from it in 20 countries worldwide. Wherever you should decide to go with phytron, our products are always on one and the same page: In each piece of equipment and in every individual solution, lies the same passion for quality, the same specialist competence and the same highly technical precision. A love for detail, which since 1994 has achieved the strict ISO 9001 specifications.
Interface and Programming
MiniLog-Comm
Communication software for stepper motor controllers
MiniLog-Comm is a Phytron software for Windows® PC to operate and program type OMC, TMC, MCC-1, MCC-2 and MCC-2 LIN stepper motor control units.
MiniLog-Comm supports MiniLog programming of Phytron stepper motor control units and administers programs, parameter and register lists – easily and quickly.
Technical Details
- Communication software for Phytron MCC, OMC, TMC and IXE stepper motor control units
- Browser-independent installation software
- Programming control units at the PC
- Editing, testing, transmitting and administering customer programs acc. to DIN 66025 or in the Phytron MiniLog format
- Status display for inputs, outputs and limit switches
- Direct mode and drive mode to move to axes
- Motion creator for translating two-dimensional motion profiles into MiniLog programs
- Program test in the single step mode and setting breakpoints
Driver and Controller
- Advanced motion control board for controlling up to 4 axes: stepper motors or servo motors
- Mount in a PC: 32 Bit PCI Bus, Plug & Play
- Pulse Output Rate up to 6,55 MHz
- Pulse Output Options OUT/ DIR/ CW/ CCW
- 2 to 4 axes linear interpolation
- 2 axes circular interpolation
- Speed change during operation
- Position change during operation
- 3 reference point modes: linear/ trapezoidal/ S-curve
- On-Demand: MPC 8164 motion controller board for MINI PC
Motors and Actuators
Harsh Environment Stepper Motors HSS / HSH: 55 -120 mm
Dominant: solutions that perform in extreme conditions
Phytron’s HSS stepper motors for harsh climates reveal all decisive characteristics for smooth use in environment temperatures of - 40°C until +150°C. With activated integrated cooling fins, this highly specialized driving solution can operate in temperatures as high as + 180 °C, maintaining its cool even during continuous operation.
Mechanics and Equipment
DMP 29 / 37 Inertial Damper for Stepper Motors
The reliable damping component without loss of torque
DMP 29 and 37, Phytron’s inertial dampers improve the system’s characteristics of stepper motor applications, by reducing the settling times and by suppression of system resonances impressively. The dampers are designed for stepper motors size 32 (NEMA 14) and 37 (NEMA 17) with second shaft, used in optical applications or other sensitive environments.
Technical Details
- Inertial damper for stepper motors with 2nd shaft of size
- 32 / 42 (NEMA 14 / 17)
- External diameter 29 or 37 mm
- Mounts onto motor shaft
- Material: Aluminium
- Diameter: 3, 4, 5 mm or customized
- Headless screws for mounting ISO 4027 (DIN 914/A2)
-
Environmental conditions:
Ambient temperature 0 to +60 °C
Storage temperature -20 to +70 °C - Protection class IP 62 (IEC 34)
Standard Industrial
Dependability. High precision.
Whether in the positioning of sleds, moving of pressure drums, or in the handling of postage sorting devices - continuously high and dependable achievements are required. Phytron solutions perform valuable services and support businesses worldwide in the optimisation of their manufacturing processes.
Stepper Motors ZSS: 19 – 56 mm
Convincing: performance that sets the standards
The Phytron ZSS stepper motors set powerful accents in every movement through their silence in operation. The two phase hybrid stepper motors control come up to 200 step s. Designed for demanding automation processes with exemplary efficiency.
Technical Details
- Two-phase hybrid stepper motors for unipolar or bipolar control mode
- Holding torques from 3.8 to 700 mNm
- Sizes ZSS 19 to 56 mm
- Up to 3 motor types and 3 standard windings per size
- Standard number of steps/rev.: 200, step angle: 1.8°
- Special number of steps depending on the motor size
- Minimum protection mode: IP40
- Permissible surface temperature: -20 °C to +120 °C
- Optional: gear, motor brake, encoder, 2nd shaft, heat sink, coupling, etc.
Available Models:
- Sizes, numbers of steps, windings: see table in the data sheet
- Free wire ends or protective cover, heat sink, 2nd shaft
-
Gear, motor brake, encoder
Science and Research
NEMA Stepper Motors ZSH: 57 – 107 mm
Technical Details
- Two-phase hybrid stepper motors for unipolar or bipolar control mode
- Holding torques from 0.45 to 17 Nm
- Diameters ZSH: 57 to 107
- NEMA compatible
- Number of steps/rev.: 200, step angle: 1.8°
- Minimum protection mode: IP54, IP68 on request
- Permissible surface temperature: -30 °C to +80 °C (short-time up to 100 °C)
Available Models
- Sizes and windings: see table in the data sheet
- Free wire ends or terminal box, 2nd shaft
- Gear, motor brake, encoder
Specific Solutions for Specific Disciplines
In every question lies an answer. And in every task lies a challenge. phytron specialized in specializing: With individual solutions in small series or also as single devices; each constructed to your exact requirements. Put our potential to the test and experience for yourself, and see how phytron builds solutions out of problems
CONTACT US
Remember to Mention Applegate Directory Ltd when you Call.
Products and Services
- Actuators
- Actuators - Ballscrew
- Actuators - Electric
- Actuators - Linear
- Actuators - Linear, Electric
- Actuators - Miniature
- Actuators - Rotary
- Actuators - Rotary, Electric
- Actuators - Rotary, Positioning
- Actuators - Special Purpose
- Amplifiers - Servo
- Automation - Bespoke Solutions
- Automation - Industrial
- Automation Special Purpose Equipment Or Systems
- Automation Systems
- Automation Systems Integration
- Compact Gear Motors
- Control Systems
- Controllers - Programmable
- Drive Systems
- Drives
- Drives - Variable Speed
- Drives - Variable Speed, Electronic
- Drives and Controls - Automation
- Gear Motors
- Geared Motor Units
- Geared Motors - Electric
- Linear and Rotary Positioning Stages
- Linear Motion Products
- Linear Motion Slides
- Linear Motion Systems
- Linear Slides
- Linear Systems
- Micro Positioning - Systems
- Motion Control
- Motion Control - Precision Components
- Motion Control Systems
- Motion Controllers
- Motion Controllers - PC Based
- Motor Controls
- Motor Drive Control Systems
- Motor Drives - Variable Speed
- Motor Position Controllers
- Motors - Brushless
- Motors - Closed Loop
- Motors - Electric, Stepping
- Motors - Electric, Submersible
- Motors - Electric, Variable Speed
- Motors - Electronic Controlled
- Motors - Geared
- Motors - Hybrid Stepping
- Motors - Medical Equipment
- Motors - Miniature
- Motors - Open Loop
- Motors - Servo
- Motors - Variable Speed
- Position Controlling Systems
- Positioning Slides
- Positioning System Linear Ball Slides
- Programmable Automation Controller
- Servo Control Systems
- Servo Drives
- Servo Drives - AC
- Servo Drives - AC Brushless
- Servo Indexing Drives
- Servo Motors - AC Brushless
- Servo Motors and Drives
- Servo Systems
- Servo-Motor Systems
- Single Axis Control System
- Space Motors
- Stepper Motor systems
- Stepper Motors
- Stepper Motors - Controllers
- Stepper Motors - Cryogenic
- Stepper Motors - Customised Solutions
- Stepper Motors - High Temperature
- Stepper Motors - Radiation
- Stepper Motors - Space
- Stepper Motors - Special
- Stepper Motors - Vacuum
- Vacuum Steppers
Last Updated: 13-Oct-2011
Results page
The number of times that this company page has been viewed can be seen on the results page for Phytron UK Ltd
The number of page impressions and therefore the number of users reaching a company page can be improved by advertising in Applegate. Use Contact Applegate for more details.