The Electric Gate Shop - Electric Sliding Gates

The Electric Gate Shop supply access control systems to both public and trade, throughout the UK and
Ireland. Our range of iron gates and gate automation can be issued on both residential and commercial properties.  

Our electric sliding gates kits are designed to make an existing sliding gate open and close automatically. A flat gear or rack attaches to the side of the gate and the pinion gear on the motor winds the gate open and closed.

The Electric Gate Shop can supply a wide range of gate automation systems (electric gate kits) for aboveground use. We offer both high and low voltage kits. All our electric gates come with comprehensive fitting instructions and free technical help prior to, during and post fitting. If you have a particular requirement, please e-mail us and we will suggest a gate automation kit with the exact specification to suit your needs. 

5 Bar Gates - Single Farm Gate Opener Systems

We supply a wide range of gate automation systems for five bar estate gates or large single farm gates. All our single gate kits come as standard with a Viro V96 electric lock.

The electric lock protects the motors from being forced and adds extra security to the system. "If it needs it we include it".
 

We offer a wide range of 12v solar gate opener systems for above ground and underground use.  All these systems can be battery powered, and the battery charged via a solar panel.

 

Please visit our website to view our range of swing gate hardware.

Visit our website for our range of industrial electric gates opener systems. The motors we use are of exceptional quality oil submerged for cooling and lubrication.
 

The Electric Gate Shop supply high quality safety and security equipment, including:

• Warning beacons
• Infrared photo cell beams
• Anti vandal photocells
• Photocell posts

Please visit our website for more information.

In our accessories section you will find the vehicle induction loop presence detector or inductive loop, along with the very versatile stainless steel anti vandal keypad, timers and many other items.

The keypads we offer can be used as a standalone device or connected directly to an electric gate. 

Manufactures of proximity readers include CDVI, Bewater, CDV, Easiprox, FAAC, Came, BPT, Nortech, Paxton OEM, Videx, Daitem, Logisty, Gem, Dortag, Farfisa, Genie etc.

You can use any of these systems with any of the kits offered by The Electric Gate Shop or our competitors. Card readers offer great convenience and flexibility with a medium to high security level. The Electric Gate Shop Ltd offer many variants available in a compact style or with remote secure electronics.

To open the gate / door you can hold up a tag, or card or both. The long range card doubles the effective range. 

We supplye Daitem wireless door phones that are wireless from the gate to the property and, although they are at a premium price, the time and fuss saved laying hardwired systems make them very cost effective option. Typical range 150m.

It is possible to increase the range of the unit by extending the wire between the call station and the transmitter box. You can buy with the confidence that if you are not satisfied with the reception you can return the unit to us for a full refund.

All our wireless intercoms come with instructions of how to integrate them to open doors, locks and automatic gates. These three function units will operate a main set of gates and an electric lock like our Viro V90, at the same time. 

The Electic Gate Shop can supply gate remote controls that replace many existing gate and garage remotes, by copying/cloning the existing ones.

Many remote controls for electric gates and automatic garage doors use dip switch codes, 10 and 12 dip binary with 1024 and 4096 code combinations. Our self learning remotes or zappers as they are sometimes known, can clone and reproduce the same code from your old gate remote control if it is 433 MHZ.

If your remote control does not appear in the list below, please contact us. Even if your remote control is obsolete we can supply a universal radio receiver unit that will control your existing automation unit. (Requires some LV wiring)  

Electric garage door openers are suitable for automating existing garage doors.

The Speedy 80 garage door operator for fully retractable up and over or sectional garage doors with horizontal tracks inside garage and springs behind door frame side posts. 

Please visit our website for more information.

The Electric Gate Shop are the main stockist for Saimatic PM 8000 and CTR17- gate control panels. We also offer the PM 10000, PM8100 and CTR32- gate controllers that have the slowdown feature along with self learning for single and twin gates. The CTR19- is usually used for the Veloce swing arm system.

There are many electric gate systems from the company, Boss Automation, still in service today that you may need spares for. Examples are the Plug and Press system from Boss. We can usually find replacement compatible parts for this kind of gate automation. 

Please visit our website for more information.

Gate installers wishing to comply with the machinery directive need an impact force tester.

The measure the force of the gates you must use a force test gauge that fully complies with the EN12445 Standard. 

A gate installer that tests the forces will provide a report showing all forces are within the safe parameters of the machinery directive (If not additional work may be done to bring down the forces).

It means that when you installled the gate or gates the impact forces were within the required parameters and you have the documentation to prove this.  

The Electric Gate Shop Ltd offer impact force testers and range of reduced price safety edges that fully comply to the EN12445 machinery directive.  

Please visit our website to view our range of electric folding gates.

Bedslide Sliding Cargo Tray - A device that moves the cargo or load usually from a pick up truck or van to rear of the vehicle for easy reach. The main purpose of a Sliding Cargo Tray :-

• Safety - To avoid an operator having to climb into the rear of a vehicle un-aided.
• Speed - It allows the user to work more efficiently thus achieving more output.
• Efficiency - It brings the full load carrying capacity of the pick up or van into use.  

Please visit our website for more information.