Mason Morley Ltd
- Tel: 0113 253 8681
- Fax: 0113 2523179
- Spray Quip House, St Pauls Street, Morley, Leeds, West Yorkshire, LS27 9EP (Road Map)
- Email Enquiry Contact company.
- View Website
View company site.
| Director | Ronald Mason |
| Sales Advisor | Stephen Mason |
| Number of Employees: | 1 - 20 |
Airless Spray Equipment
Mason Morley limited have over 25 years experience in the supply and service to the shotblasting and paint spraying industry.
We have an large fleet of equipment for hire, for both shotblast and paint spray.
- we carry extensive stocks of spare parts for Graco spray equipment and Graco pumps for immediate delivery.
Sandblasting Equipment
Our in house service department have many years experience in the repair and refurbish to most types of equipment including.
- Airgunza
- Airlessco
- Amspray
- Anest Iwata
- Apollo (HVLP)
- Aro
- ASM
- Asturo
- Bambi
- Binks
- Bollhof
- Clemco
- Colora
- DeVilbiss
- DMD
- Graco
- Hero
- kremlin
- Larius
- Portaspray
- Sagola
- Speeflo
- Titan
- Wagner Spraytech
- Walther Pilot
- Wiwa
We also supply all related equipment such as , Airless paint spray hose - Consumable parts and repair kits - Spray tips and Spray Nozzles - Spray guns - All types of paint filters - High Pressure connectors , North safety Equipment - air fed and powered face masks, Bacou-Dalloz range including - Willson - Pulsafe, Hand protection - ear protection - disposable coveralls - shotblast abrasives - shotblast hose - blast nozzles both alloy and tungsten carbide - blasters helmets - expendable visors - breathing air filtration - operator protection clothing, Spray booth filters - Booth coatings - Booth chemical additives
Airless spray machines - Air
Click here for our range of Airless spray machines – Air
Airless spray machines - Electric
Click here for our range of Airless spray machines – Electric
Airless spray machines - Petrol
Click here for our range of Airless spray machines - Petrol
Blast cleaning accessories
- Blast Hoses
- Blast Media
Blast cleaning equipment
Portable range of blast pots with grit capacity ranging from 50lb to 600lb. Supplied with remote control valve and steel grit or sand valve.
Breathing equipment
Full face visors for spraying in hazardous locations. A safe and efficient way of complying with current health and safety legislation.
Air fed and battery powered are available – please see below or call Mason Morley to discuss your requirements.
Can crushers
Save money and reduce the amount of space taken up in your skips. This simple and easy to use way is a must when disposing of empty cans and containers.
Conventional guns and Pressure pots
The 7500 series spray gun is suitable for use with either thier HVLP system or a stand alone HVLP air spray gun, Gravity, Suction or Pressure fed all in one.
Gun Washers
Hands free C.E Approved operation units for cleaning single or multiple guns and cups. Wash cycle powered by heavy duty diaphragm pump, complete with air regulator and filter, auto fume extraction system, auto shut off when door is raised.
Hire - Repair - Servicing
- Hire - PAINT SPRAY UNITS and ACCESSORIES
- Hire - BLAST CLEANING and ACCESSORIES
- Svc - REPAIRS and SERVICING
Air and Fluid Hoses
- High Pressure Fluid Hose
- Textile Braided Fluid Hose
- Low Pressure Fluid Hose
- Low Pressure Air Hose
- Compressor Air Hose
- Breathing Air Hose
HVLP Spray Units
Since 1966 Apollo Sprayers International have been leaders in the field of low overspray HVLP products for the finishing industries.
P.P.E
- Twin Mask Respirator - Olympus Twin Respirator
- Half Mask - 3M Maintenance Free Range
- Disposable Respirator - 3M Dust / Mist Respirator
- Coveralls
- Gloves
Paint Test Equipment
A compelte range of instruments for the industrial coatings and finishing industries.
Plural Test Equipment
Click here for more information for Plural Test Equipment
Solvent Recovery Machines
- Saves Money
- Helps The Environment
- Instant Reuse of Recycled Solvents
- Reduce Waste to a Minimum
- Dramatically Reduce Purchases of New Solvent
- Reduce Your Stock, Reduce the Risk
- Wide Range of Options
- Leasing Plans Available
Spray Booths and Filters
- Spray Booths
- Columbus Industries
- Filter Rolls
- Binks
Spray Guns and Pole Guns
Follow the link for Spray Guns and Pole Guns
Spray Tips and Filters
Follow the link for Spray Tips and Filters
Transfer pumps
Follow the link for Transfer pumps
Equipment Leasing
- Minimal Cash Outlay
- Overcome Your Budgetary Limitations
- Flexibility
- Conservation of Working Capital
- Tax Benefits
-
100% Financing
B2B Products and Services
- ACTIVATED CARBON FILTER ELEMENT
- AGMEC BULB
- AGMEC FRONT END CAP
- AGMEC LAMP COMPLETE 12 VOLT
- AIRLESS SPRAY GUN 500 BAR (BLACK)
- ALOX 4 (25KGS)
- ALOX 5 (25KGS)
- ALUMINIUM OXIDE 25KG GRADE 150
- ANGLE HEAD ASSY FOR MINI-POLE
- ANGLE HEAD SEAL SET
- ANGLED RADIATOR BRUSH 1",S3"
- ANGLED RADIATOR BRUSH 2",S3"
- APOLLO ACOUSTIC FOAM KIT
- APOLLO CAPE & MUFFLER (MOD) H/DUTY RE-ENFORCED
- APOLLO CAPE ATTACHM'T STRIP
- APOLLO FILTER RETAINER
- APOLLO INNER SAFETY LENS
- APOLLO OUTLET FILTER KIT (GREEN)
- APOLLO TEAR/OFF VISOR 6 PKT
- APOLLO WINDOW SEAL
- APOLLO 60 COUPLING SET
- BANANA BACK VISOR (APOLLO)
- BANANA VISORS, TEAR OFF (PACK OF 6) (APOLLO)
- BEADED HAND CLEANER 5LT
- CANVAS BLASTSUIT XXL
- CANVAS BLASTSUIT (M)
- CI FILTER ROLL EU2 42 X 33' (green tag)"
- CI FILTER ROLL EU2HC 42x33' (orange tag)"
- CLAW COUPLING 1.1/4 (MALE THREAD)
- COALESCING FILTER ELEMENT
- COMMANDER GLASS VISOR PACK 10
- COMMANDER GLASS VISOR (PK5)
- COMMANDER VISOR SEAL
- COMMANDER WINDOW KIT (A160664)
- COMMANDER WIRE MESH SCREEN (PK10)
- COTTER PIN,2X 3/16""
- COTTON STOCKINETTE K/WRIST GLOVE
- COUPLING GASKET CG15 FOR CQP1 NYLON 1.1/2
- COVER 10" FOR BLAST POT
- COVER 24" FOR BLAST POT
- CTS CLEAR PEELABLE COATING 25L.
- CTS FOAM SUPPRESSANT(CONCENTRATE) 20KG
- CTS LIQUID SPRAY BOOTH ADDITIVE 25LT
- CTS PEELABLE COATING 5LT
- DEADMANS HANDLE C/W SAFETY CATCH
- DEADMANS HANDLE RM 21-A
- DEWPOINT METER (RH%/DEWPOINT/AIR TEMP)
- DIAPHRAGM
- DISPOSABLE SHOE COVER (PAIR)
- DUCTING TAPE
- ECONOMY RUBBER GLOVE SIZE 9
- EPI MIXER 3/8 x 4""
- EXPENDABLE ABRASIVE 25K BAGS SUPA
- FIBRE GLASS FILTER ROLL 1M X 20M X 50MM
- FILTER 100 M. YELLOW
- FILTER 50 MESH WHITE
- FLAT SAND VALVE
- GAUGE, 0-100 PSI 1/4 BOTTOM ENTRY"
- GRIT BLAST GUN (HOSE FEED)
- HANDHOLE GASKET. (H.C.TYPE).
- HI-VIZ WAISTCOAT
- HOSE SCREW
- INLINE FILTER
- INTERMEDIATE VISOR (APOLLO)
- INTERNAL REP.KIT (ARK602C) 1.1/2
- LARGE NOZZLE GASKET
- LATEX GLOVE BOX 100
- MANIFOLD
- MANUAL DRAIN VALVE (SA600Y7-1)
- MENS COTTON CHROME GLOVE
- METERS OF BLAST HOSE 1.1/2 X 1 12BAR
- METERS OF SHOT BLAST HOSE 63 X 81 10 BAR
- METRES OF BLAST HOSE 1-7/8 X 1-1/412 BAR
- METRES OF SHOT BLAST HOSE 65 X 85
- METRES OF 3/8 LOW PRESSURE FLUID HOSE"
- MINI HVLP GRAVITY SPRAY GUN 1.0mm
- MORDANT LEATHER WELDERS GAUNTLETS
- MSH OUTER VISOR
- MTR'S OF 3/8 RUBBER AIR HOSE.psi"
- NIPPLE 1/2 X 3/8 NPT
- NIPPLE 1/4 X 1/4 NPT
- NIPPLE 3/4 X 1/2 NPT
- NOBELE CAPE WITH TRIM AND FITTINGS
- NOBELS LATEX HOOD
- NOBELS REGULATOR AND BELT
- NOBELS SCREWS & NUTS (10PK)
- NOBELS VISOR CARRIER
- NOBELS WINDOW SEAL
- NOVA 2000 SHOTBLASTERS HELMET COMPLETE
- NOZZLE HOLDER (NHP1) 1.1/2 HOSE (PLASTIC)
- O RING
- PAINT STOP FILTER ROLL 1.5M X 20M X 4",L1"
- PAIRS FURNITURE HIDE GLOVES
- PANORAMA MUFFLER NECK SEAL (METAL ZIP)
- PANORAMA OUTER VISOR 13 1/2 X 5"
- PANORAMA WINDOW GASKET
- PAPER BOOTH FILTER 90 X 924
- PAR 38 SPOT BULBS 120W. 115V.
- PEELABLE BOOTH COATING W/B
- PHOENIX DISPOSABLE VISOR PK20
- PHOENIX PROBAN CAPE
- POP UP STEM & NUT ONLY (LARGE)
- POP UP VALVE & STEM LARGE
- POT COUPLING 1/2"
- PROSHIELD 30 COVERALL (EX/EX LARGE)
- PROTECTIVE SHEET 717mm x 388mm x 1.3mm
- RIGGERS STANDARD CHROME LEATHER PALM
- RUBBER BUTTON FOR H.C. DEADMANS HANDLE
- RUBBER BUTTON FOR SBS 08-019-A (RM) DEADMANS
- SAND BLAST GUN. C/W 1LT POT
- SCORPION BLAST HELMET C/W HEAVYDUTY CAPE
- SCORPION CAPE & NECK SEAL
- SCORPION INNER VISOR
- SCORPION SHOTBLASTERS HELMET
- SCORPION TEAR OFF(6)
- SCORPION VISOR DOOR
- SET OF 8 NUTS & BOLTS
- SIEVE FOR 10" BLAST POT
- SIEVE FOR 14" BLAST POT
- SIEVE FOR 20" BLAST POT
- SIEVE FOR 24" BLAST POT
- SILENCER & CORE ASSY
- SILENCER CORE
- SILICON CARBIDE NOZZLE C.THREAD 1/2 BORE
- SILICON CARBIDE NOZZLE C.THREAD 3/8 BORE
- SILICON CARBIDE NOZZLE C.THREAD 7/16 BORE
- SOLVENT RESISTANT NITRILE GLOVE (S10)
- SQUARE FEET S/S FILTER (80 MESH)
- STEEL GRIT
- STONE GRIT EX-FINE
- STONEGRIT FINE 37.5K
- SURFACE PROFILE GAUG
- SYCLONE NOZZLE 3/8"
- TEAR OFF VISOR (PK6) BULLARD
- TESTEX SNAP GAUGE
- TOP COVER
- TUNGSTEN NOZZLE 1/2 BORE C.THREAD (82mm LONG)
- TUNGSTEN NOZZLE 1/4 BORE C.THREAD 145MM LONG
- TUNGSTEN NOZZLE 1/8 BORE FINE THREAD 45MM LG
- TUNGSTEN NOZZLE 3/16BORE FINE THREAD 45MM LG
- TUNGSTEN NOZZLE 3/8 BORE C.THREAD 180mm LONG
- TUNGSTEN NOZZLE 3/8 COATED
- TUNGSTEN NOZZLE 5/16 BORE COURSE THREAD 45MM LONG
- TUNGSTEN NOZZLE 5/16 BORE F,THREAD (45MM LONG)
- TUNGSTEN NOZZLE 7/16BORE C.THREAD
- TUNGSTEN NOZZLE,5/16BORE C.THREAD
- TUNGSTEN SIDE BLAST NOZZLE 3 PORT (3/8")
- TUNGSTEN SIDE BLAST NOZZLE 1 PORT (5/16)
- TUNGSTEN SIDE BLAST NOZZLE 3 X 3/16 PORTS
- TUNGSTEN 3/8" SIDE BAST NOZZLE FINE THREAD
- U CUP SEAL
- UNION M/F 1/4 X 1/4 NPSM
- UNION M/F 3/4 X 3/4 NPSM
- UNION M/F 3/8 X 1/2 NPSM
- UNION M/F 3/8 X 1/4 NPSM
- UNION M/F 3/8 X 3/8 NPSM
- UNION 1/2 FS X 1/2" M"
- VARI POLE COMPLETE 3 SECTIONS
- VISOR CARRIER
- VISOR PK 100 15.1/2 X 6.1/4
- VISOR 12-1/4X 4-1/4 SHOGUN SV1 HELMET
- WARRIOR CAPE AND NECK SEAL
- WARRIOR NECK SEAL FOR CAPE
- WARRIOR OUTER STATIC VISOR
- WARRIOR OUTER VISOR (6 PACK TEAR OFF)
- WET BLAST HEAD WB1
- 1 AIR REGULATOR
- 1 PACK 50 TAK RAGS
- 1 PAINT BRUSH"
- 1 SAUNDERS VALVE
- 1.1/2 BLAST HOSE COUPLING MALLEABLE
- 1.1/2 REGULATOR"
- 1-1/2 WATER TRAP
- 1.1/4 REGULATOR
- 1.1/4BALL VALVE"
- 1-1/4SAUNDERS VALVE
- 11.5 X 4.5" INNER VISOR FOR "SHOGUN
- 1-1/8 NOZZLE GASKET"
- 1.1/8 NOZZLE HOLDER (NYLON)
- 1/2 BALL VALVE"
- 1/2 HOSE CLAMP
- 1/2 PAINT BRUSH"
- 1/2 SAUNDERS VALVE
- 1/2 3000LB HEX NIPPLE"
- 1.3/8 BLAST HOSE COUPLING (BRONZE)
- 1/4 BALL VALVE (T)
- 1/4 BSP AIR REGULATOR
- 1/4 LUBRICATOR L606
- 15 MTR 3/4 AIR HOSE C/W FITTINGS(300psi)
- 15MT 3/8 Low pressure FLUID HOSE
- 15MTR HP AA HOSE ASSY
- 15MTR LP FLUID/AIR LINE 3/8-5/16
- 1.7/8 BLAST HOSE COUPLING (BRONZE)
- 1.7/8 NOZZLE HOLDER (ALLOY)
- 1/8 BSP AIR GAUGE (0-100 PSI) BACK
- 1/8 BSP AIR GAUGE (0-60 PSI) BACK
- 2 STRIPPING KNIFE (SOFT TOUCH)"
- 2.1/8 BLAST HOSE COUPLING (BRONZE)
- 25KG BAGS STEEL SHOT
- 25KG 30/60 GARNET
- 3 SCRAPER (SOFT TOUCH)"
- 3 BAR RELIEF VALVE
- 3 PAINT BRUSH"
- 3 STAGE AIR FILTER SYSTEM IN BOX
- 3MT 1/4 TEXTILE WHIP HOSE 3/8M X 1/4F
- 3MT 1/4 WHIP HOSE"
- 3000LB H.D NIPPLE 1.1/4 X 1
- 3000lb H.D TEE PIECE 1"
- 3000lb H.D TEE PIECE 1/2"
- 3/4 CLAW COUPLING (MALE THREAD)
- 3/4 CLAW FITTING ( TAIL TYPE)
- 3/4 FILTER/REG/LUBE"
- 3/4 LUBRICATOR"
- 3/4 WATER TRAP"
- 37.5 KG NON SILICA ALTERNATIVE TO SAND
- 3/8 BALL VALVE (T)
- 3/8 CLAW COUPLING MALE THREAD
- 3/8 LP PAINT HOSE (5 METER ASSEMBLY)"
- 4 PAINT BRUSH"
- 4MT 1/4 WHIP HOSE"
- 45 DEG ANGLE ADAPTOR (POLE)
- 5/16 BORON ALLOY SIDE OUTLET
- 6 MT LP FLUID & AIR LINE ASSY 3/8 - 5/16
- 600LB CAPACITY AUTO BLAST POT
- 7 BAR RELIEF VALVE
- 7/16 BORON ALLOY NOZZLE
- 7.5 METRES 1/4 1 WIRE HP PAINT HOSE"
- 7.5 MTRS 3/8 2 WIRE HP HOSE"
- 9 BAR RELIEF VALVE
- 9 X 6.75" OUTER VISOR
- Abrasive Blasting
- Abrasive Blasting Equipment
- Abrasives - Blast Cleaning
- Agitators
- Anest Iwata HI-TEC PRESSURE SPRAY GUN 1.5MM
- Anest Iwata HTE PRESSURE SPRAY GUN 1.5MM
- Anest Iwata HTE SYPHON SPRAY GUN 1.8MM
- Blast Cleaning - Equipment
- Blast Cleaning - Hand Cabinets
- Blast Cleaning - Services
- chapsmith AI FILTER CARTRIDGE BOX 5
- chapsmith A1/P2 FILTER CART'G BOX 3
- chapsmith A1/P2 FILTER CARTRIDGE R256 (SINGLE)
- chapsmith PREFILTER BOX 25
- chapsmith SINGLE RESPIRATOR
- chapsmith TWIN RESPIRATOR
- Decorators Supplies or Sundries
- Face Masks
- Filter Media
Last Updated: 23-Jun-2011