Woodley Equipment Company Ltd - Omron M6 Blood Pressure Monitor

The Omron M6 blood pressure monitor available for rental/hire or purchase...

The Omron M6 blood pressure monitor is a clinically validated monitor which has the largest display in the market, making it easy to read and use.

Measurements are taken using IntelliSense® technology which features a support system, showing the user if body movement has disturbed the measurement and needs to be repeated.

A unique algorithm detects the measurement quality and assures that only valid results are displayed - it can also detect and display irregular pulses.

Features
Fully automatic upper arm blood pressure monitor
Intellisense® technology
Speedy measurement
3 cuff sizes available (optional)
Memory has date and time stamp
Irregular Pulse Detection: shows if irregular pulses are detected and only displays reliable results
Memory capacity for 90 memories
Indicates if patient has moved too much
Largest display on the market
Clinically validated (International Protocol)
1,500 measurements with one set of batteries
Soft case
 

Specifications
Measurement method
Oscilometric method
Measurement range Pressure: 0 - 299 mmHg
Pulse rate: 40 - 180 bpm
Accuracy: Pressure: ± 3 mmHg, Pulse rate: ± 5% of reading
Inflation: Fuzzy logic controlled by electric pump
Deflation Automatic pressure release valve
Display LCD digital display
Battery life Approximately 1,500 measurements
Operating temperature10 to 40°C, Operating humidity 30 to 90% RH
Weight 355g without batteries
Dimensions 84h x 155w x 131d mm

This Omron M6 blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The 705CP-II/IT blood pressure monitor is a fantastic, portable monitor suitable for use in a variety of situations. It is easy to use and has a variety of features.

The 705CP-II/IT is designed for the professional wishing to have a hard copy of their blood pressure results.

The 705CP-II is supplied with a printer, a USB cable and software disk.

Features
Fully automatic upper arm blood pressure monitor
Bio Information Link (BI) functionality
USB cable and software optional
Includes printer for hard copies
Intellisense™ technology
Small and large cuff as optional accessory
Memory capacity for 28 readings
Large 3-fold display (Sys/Dia/Pulse)
Clinically validated (International Protocol & British Hypertension Society)
Optional larger cuffs are available
Compact and lightweight for ease of use
Highly accurate algorithms
Quiet operation, easy-to-use and easy to apply
Software and data output are compatible with most PC’s

At times a hardcopy of your readings is necessary for your files. This BP monitor can be supplied in two formats for either transferring information to a PC or directly to a small external printer.

Optional AC adapter and large or small cuffs are available.

Specification
Measurement range
Pressure: 0 - 299 mmHg
Pulse rate: 40 - 180 bpm
Accuracy: Pressure: ± 3 mmHg, Pulse rate: ± 5% of reading
Memory 28 measurements
Inflation Fuzzy-logic controlled by electric pump
Deflation Automatic pressure release valve
Measurement method Oscillometric
Pressure detection Capacitive pressure sensor
Power source 4 alkaline
Operating temperature 10 to 40°C
Operating humidity 15 to 90% RH
Weight 380g with batteries
Dimensions 71h x 177w x 115d mm
 

This 705CPII/IT blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This innovative all-in-one Omron 907 blood pressure monitor is specifically designed for use in the clinical setting and is clinically validated.

It is designed for versatile use offering automatic oscillometric and manual auscultatory modes.

The Omron 907 is quiet, quick and simple, and is used by many professionals in a variety of settings. Measurements are displayed digitally.

Features
Clinically validated
Oscillometric and auscultatory use combined in one unit
Hide display functions
Deflation button (deflation control)
Average reading mode
Quiet operation
Digital automatic upper arm model
Intellisense™ technology
Supplied with rechargeable batteries and adapter
Environmentally friendly - rechargeable battery, washable cuff and reduced packaging
Mobile stand with basket (optional)
 

Specifications
Display Digital
Measurement Oscillometric method
Measurement range Pressure: 0 to 299 mmHg
Pulse rate: 30 to 199 beats/min
Accuracy Pressure: ± 3 mmHg
Pulse rate: ± 5% of reading
Inflation Automatic with pumping
Deflation Automatic by electromagnetic control valve
Air release Automatic rapid, by electromagnetic control valve
Pressure detection Electrostatic capacity semi-conductor pressure sensor
Power supply AC adapter (230VAC, 50Hz. 20VA) or battery pack (4.8VDC, 6W)
Electric shock protection
Class II B Type
Operating temperature 10°C to 40°C
Operating humidity 30 to 85% RH
Weight Approximately 910g
Dimensions 203h x 139w x 131d mm

This Omron 907 blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This fully automatic M5i blood pressure monitor is ideal for spot-checking purposes. It uses clinically validated measurement technology and "Intellisense" to control inflation and deflation.

 Features
Comfortable and fast measurement of blood pressure and pulse
Memory for 14 measurement results
Includes built-in technology to take child measurements
Supplied with standard cuff and batteries.
 

Specifications
Dimensions 177 x 72 x 115mm
Weight 530g

 This M5i blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Carescape V100 blood pressure monitor is designed for use on adult, paediatric and neonatal patients. It is extremely accurate and reliable, not only for blood pressure, but for a range of other parameters too. The monitor is also capable of alerting the clinician to changes in the patient’s condition or when it is unable to effectively monitor the patient’s condition.

 Features
Highly portable and lightweight
Choose from Pulse Rate, BP, Temp and Pulse Ox
Memory stores up to 25 tests within a 24 hour period
Order with or without printer
Includes mounting bracket
Choose from Nellcor, Masimo or Ohmeda pulse oximetry
Simple push button design
Internal battery provides 8 hour runtime when needed
Patient info can be transmitted to your EMR
Specially designed to run cool, and has an IPX1 water and dust penetration rating that supports infection control and cleaning
SuperSTAT blood pressure algorithms support speed, comfort and artefact rejection
Alaris Turbo temp thermometry in seven seconds
Self supporting on rubber feet or pole mounted

Specification
Systolic Range
Adult 30 - 245 mmHg

Neonatal 4 - 140 mmHg
Diastolic Range
Adult 10 - 195 mmHg

Neonatal 20 - 100 mmHg
MAP
Adult 15 - 215 mmHg

Neonatal 30 - 115 mmHg

Pulse Rate Range
Adult 25 - 240 bpm
Neonatal 25 - 240 bpm
SpO2
1 - 100%

Perfusion Range
0.02 - 20%

Dimensions
195h x 220w x 135d mm
Weight
2.4 kg
 

This Carescape blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

These ambulatory blood pressure monitors provide fast, accurate results enabling users to fine-tune their patients treatment. Extensive testing by independent clinicians has validated their accuracy time and time again.

Their reliability has made them the number one ambulatory monitor in the world. They have a compact design, are lightweight and have a quiet operation to maximise patient comfort.

 The monitor has advanced reporting software that allows rapid analysis of patient information.

Features
Choice of 90207 or UltraLite™ 90217 ABP monitors
Real-time evaluation of ABPM data
Individual site configuration
Compact, lightweight design
Clinically validated
5 cuff sizes available (optional)
ABP report generator/printer (optional)
ABP report management system (optional):

Interfaces with 90207 and 90217 ABP monitors
Software offers quick and simple method of retrieving, displaying, editing and printing ABP data
Configurable report format
Enhanced graphics
Advanced search capability
Remote communications feature for programming and data retrieval via modem
Supports e-mail transfer of reports as PDF files
Supports compliance with FDA electronic records requirements and HIPAA

Specification
Various cuff sizes available
From 12 - 50 cm

Disposable cuff covers
Optional
Various accessories available

ABP report system
Windows compatible, remote communication capability

monitor programming via modem

90207 monitor
Power supply: 4 x AA batteries

Weight: 347g including batteries

Dimensions: 28h x 86w x 114d mm

90217 UltraLite™ monitor
Power supply: 3 x AA batteries

Weight: 255g including batteries

Dimensions: 25h x 70wx 100d mm
 

This ambulatory blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Dinamap® blood pressure monitor is a world leader in providing accurate and reliable blood pressure monitoring. The technology incorporated in a Dinamap ensures accurate results even if the patient moves, the algorithm and systolic search facilities deliver accurate reading when measuring hypertensive patients and the dual hose technology ensures the highest sensitivity when taking readings.

The whole range of Dinamap Blood Pressure Monitors is available upon request.

Features
Blood pressure and heart rate
One button press for a single blood pressure determination
One button press for ‘Auto BP' to set BP time intervals
User adjustable target inflation pressure
Integrated printer
Adult cuff supplied, other sizes available

Specification
Systolic range Adult 100 - 250 mmHg
Neonatal 40 - 140 mmHg
Diastolic range Adult 10 - 195 mmHg
Neonatal 20 - 100 mmHg
MAP range Adult 15 - 215 mmHg
Neonatal 30 -115 mmHg
Dimensions 25h x 25w x 18d cms
Weight 3.5 kgs

 This Dinamap blood pressure monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Labofuge 400R centrifuge is a benchtop centrifuge ideal for average-sized samples in routine lab applications, research, biology and medicine.

The Labofuge 400R centrifuge operates with a wide range of rotors and achieves significantly high speeds. They have state of the art technology providing advantages for routine operations.

Maximum capacity: 4 x 180 ml, maximum RCF: 16,060 and the speed range is 300 - 13,000 RPM.

Features
Ensures low temperatures (0-4°C) even during long runs
A micro-processor controlled temperature surveillance system prevents samples from freezing
LED indicators for temperature, speed, rcf and run-time
Quick run function for short spins
Soft-start/soft-brake function
Effective safety concept:

automatic imbalance cut-out
steel jacket system
rotor overspeed protection
accessories for aerosol-tight centrifugation
Maintenance-free induction drive
Highly effective, environmentally friendly safe cooling technology
Typical capabilities:

28 x blood tube 4-7mm (13cm)
28 x blood tube 7-10ml
12 x conical 15ml
4 x conical 50ml
4 x universal 25ml
4 x 96 well microplate

Specification
Maximum capacity
4 x 180 ml

18 x 15 mL (fixed angle rotor)

4 x 100 mL (swing out rotor)

Maximum rcf 16,060 x g

Speed range
300 - 13,000 rpm adjustable increments of 100

Control system
EAScontrol II microprocessor controlled
Run time
1 - 99 min, continuous operation

Temperature range
0 - 40°C

Weight
74 kg

Dimensions
340h x 625w x 600d mm
 

This Labofuge 400R centrifuge is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Clinispin horizon 853RAPIDE is a medium capacity centrifuge specifically designed for Emergency Laboratories processing urgent Biochemistry/Cardiac samples. The centrifuge separates 12 gel tubes in 3 minutes, enabling samples to be centrifuged and analysed as they arrive in the laboratory, thus increasing turnaround time.

The 853RAPIDE offers control over almost every aspect of the unit's operation from variable acceleration and deceleration to easy time and speed input. The exclusive Drucker rotor allows for quick and easy sample loading and complete separation. Save settings in one of ten memory locations and recall them at the touch of a button.

Supplied as standard with the Performance Plus horizontal rotor, 12 x 10 ml adaptors and 12 x 5 ml adaptors.

Features
Electronic Timer with Display - Selectable from 1 to 99 minutes, hold feature, (+/- 1%).
Electronic Speed Control with Display - Easily set the running speed by RPM or RCF.
Brushless DC Motor - For smooth and quiet operation with no routine maintenance.
Variable Acceleration and Deceleration - Customise the run from start to finish.
End-Of-Run Audible Indicator - Sounds when the rotor has stopped to inform the operator the cycle is compete.
Variable Speed - Precision variable speed control gives the operator the ability to select from 500 RPM to the maximum rotor speed in 50 RPM increments.
Quiet Operation and Low Vibration - Double-encased motor and unique "stability mount" assure quiet performance and low out-of balance vibration.
 

Specification
Rotor Performance Plus horizontal rotor
Max. Speed 5300 RPM/ 4225 x g
Max. Capacity 12 x 10ml
Timer 99 minutes
Motor Maintenance free induction motor
Dimensions 23h x 32w x 39d cms
Weight 13.7 kgs
220V and 110V versoin available
CE, UL and CAN/CSA certified

 This Clinispin horizon 853RAPIDE centrifuge is available for hire/rent for your clinical trial or is available on a purchase basis. It can be orderedwith any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.
 

The CT8000P ECG machine features user friendly controls and settings and comes complete with an Interpretation and Measurements program. It features an LCD screen and alpha-numeric keyboard.

Equipped to provide paperless ECG options when combined with Achimed Passport (Open) Software.

Interpretation and measurements included.

Features
12 channel high quality interpretive ECG with LCD screen and alpha-numeric keyboard
High quality adult and paediatric interpretive software
Easy selection of traces from 12 x 1, 6 x 2 or the popular 4 x 3 plus Rhythm Strip one page report
On-screen lead test and lead-off indication
One touch automatic or instant real time operation
High quality digital filters for clear traces (mains, base line and muscle tremor)
Internal memory for up to 45 stored ECG records
All parameters including filters are easily programmed through the on-screen menu for a one touch ECG
Dedicated one touch keys for storing, printing and transmitting
Easy-load paper tray (220 A4 pages)
Interpretation report, with or without complexes, measurements and rhythm strips can be preset for your preferred one touch operation

Upgrade options
Spirometry
Stress Test
Thrombolysis Indication
 

Specification
Measurements Table RR, P, PR, QRS, QT and QTC intervals, and the P, QRS and T axis
Dimensions 76h x 381w x 330dmm
Weight 5 kgs with battery installed
 

This CT8000P ECG machine is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Contact us if you cannot find a solution to your ECG monitoring requirements. We have a whole range of equipment available including stress test systems, holter monitors and event recorders.

The CT3000i ECG machine is easy to use and features user friendly controls and settings and comes complete with an interpretation and measurements program.

Ideal for use in a wide variety of clinical settings.

12 lead ECG with 3 channel high quality interpretive presentation.

90mm Z fold paper print out.

Features
Auto-start button automatically produces the ECG traces complete with rhythm strip measurements and interpretation
Filters for baseline, electrical and muscle tremor interference, providing clear traces
Lead off warning and identification
Useful copy button for extra ECG traces
12 simultaneously acquired ECG traces printed on 90 mm paper, eliminates trace overlap
Paper tray accommodates z-fold or roll paper
Manual button provides real time print-outs
Mains and battery operation

Specification
Measurements table RR, P, PR, QRS, QT and QTC intervals, and the P, QRS and T axis
Battery Recharges automatically - when fully charged produces 4 hours continuous operation

Charge time - approximately 4 hours
Dimensions 73h x 293w x 210dmm
Weight 2.9 kgs

This CT3000i ECG machine is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Contact us if you cannot find a solution to your ECG Machine requirements. We have a whole range of equipment available including Stress Test Systems, Holter monitors and Event recorders.

The Eli 150 RX ECG Machine offers a broad range of solutions for clinical research ECG acquisition featuring VERITAS™ ECG algorithms and digital data transmission capabilities. It also provides unique features based specifically on Investigator site feedback accumulated from thousands of sites worldwide. Measurement and Interpretation included.

Totally calibration free

A successful study begins with high quality ECG acquisition and data collection at the site. The ELI 150 RX helps make that possible by presenting familiar terminology in an easy-to-use interface with the robust performance demanded by clinical research applications.

Features
ECG preview - high-resolution LCD display provides real-time preview of 12-lead ECG to ensure high quality data acquisition at investigator site
Custom ID™ - customised demographic data fields can be downloaded from the E-Scribe™ Rx ECG data management system to the ELI™ 150 Rx ECG for each study protocol
Positive ID™ - customised demographic data fields can be automatically populated by entering the subjects ID number, or from a subjects previously stored ECG, minimising data entry at sites
Internal storage - standard internal storage for up to 150 ECGs
Connectivity options - bi-directional communication via serial port, internal modem, LAN or wireless LAN with security for WEP, WPA-PSK and CISCO® LEAP
1000Hz sampling rate - high-sampling frequency used for 12-lead recording and analysis
Mortara VERITAS™ resting ECG interpretation algorithm - internationally recognised Mortara resting ECG interpretation algorithm provides automated analysis to assist in on-site assessment of ECG data
Barcode reader - optional barcode scanning for fast and accurate data entry
Multiple-study support - optional multi-study support for managing up to three studies on one machine

Specifications
Instrument type
12-lead electrocardiograph

Input channels
Simultaneous acquisition of all 12 leads
Standard leads acquired
I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6

Waveform display
Backlit, 1/4 VGA LCD 3-channel lead groups or complete 8-channel representation

Input impedance input dynamic range electrode offset tolerance common mode rejection
Meets or exceeds the requirements of ANSI/AAMI EC11

Patient leakage current chassis leakage current
Meets or exceeds the requirements of ANSI/AAMI EC11
Digital sampling rate
10,000 s/sec/channel used for pacemaker spike detection; 1000 s/sec/channel used for recording and analysis

Special functions
Optional Mortara VERITAS resting ECG interpretation algorithm; connectivity options for bi-directional communication; flash memory storage of ECGs

Thermal recorder
Computer-controlled dot array; 8 dots/mm

Thermal writer speeds
5, 10, 25 or 50 mm/s

Gain settings
5, 10 or 20 mm/mV
Report print formats Standard or cabrera; 3, 3+1 or 3+3 channel
Rhythm print formats
3-channel or 6-channel with configurable lead groups
Keyboard type
Elastomer keypad with complete alphanumeric keys, soft-key menu and dedicated function keys
Frequency response
0.05 to 300 Hz

Filters
High-performance baseline filter: AC interface filter 50/60 Hz; low-pass filters 40 Hz or 150 Hz
A/D conversion 20 bits (1.17 microvolt LSB)

Device classification
Class I, type CF defibrillation-proof applied parts

ECG storage
Up to 150 ECGs
Power requirements
Universal AC power supply (100-240 VAC at 50/60 Hz) 50 VA; internally rechargeable battery
Weight
3.3 kg including battery
Dimensions
102h x 305w x 292d mm

This Mortara ELI 150 RX ECG machine is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Mortara Eli 250 RX ECG Machine offers a broad range of solutions for clinical research ECG acquisition featuring VERITAS™ ECG algorithms and digital data transmission capabilities. It also provides unique features based specifically on Investigator site feedback accumulated from thousands of sites worldwide. Measurement and Interpretation included.

Totally calibration free
 

A successful study begins with high quality ECG acquisition and data collection at the site. The ELI 250 RX helps make that possible by presenting familiar terminology in an easy-to-use interface with the robust performance demanded by clinical research applications.

Features
ECG preview - high-resolution LCD display provides real-time preview of 12-lead ECG to ensure high quality data acquisition at investigator site
Custom ID™ - customised demographic data fields can be downloaded from the E-Scribe™ Rx ECG data management system to the ELI™ 250 Rx ECG for each study
Positive ID™ - customised demographic data fields can be automatically populated by entering the subjects ID number, or from a subjects previously stored ECG, minimising data entry at sites
Internal storage - standard internal storage for up to 150 ECGs
Connectivity options - bi-directional communication via serial port, internal modem, LAN or wireless LAN with security for WEP, WPA-PSK and CISCO® LEAP
1000Hz sampling rate - high-sampling frequency used for 12-lead recording and analysis
Mortara VERITAS™ resting ECG interpretation algorithm - internationally recognised Mortara resting ECG interpretation algorithm provides automated analysis to assist in on-site assessment of ECG data
Full-size Z fold paper - full size paper (8.5" x 11" or A4 supported) output includes multiple print options, including 3+1, 3+3, 6-channel and 12-channel outputs
Barcode reader - optional barcode scanning for fast and accurate data entry
Multiple-study support - optional multi-study support for managing up to three studies on one machine

Specifications
Instrument type
12-lead electrocardiograph

Input channels
Simultaneous acquisition of all 12 leads
Standard leads acquired
I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6

Waveform display
Backlit, 1/4 VGA LCD 3-channel lead groups or complete 8-channel representation

Input impedance input dynamic range electrode offset tolerance common mode rejection
Meets or exceeds the requirements of ANSI/AAMI EC11

Patient leakage current chassis leakage current
Meets or exceeds the requirements of ANSI/AAMI EC11
Digital sampling rate
10,000 s/sec/channel used for pacemaker spike detection; 1000 s/sec/channel used for recording and analysis

Special functions
Optional Mortara VERITAS resting ECG interpretation algorithm; connectivity options for bi-directional communication; flash memory storage of ECGs

Thermal recorder
Computer-controlled dot array; 8 dots/mm

Thermal writer speeds
5, 10, 25 or 50 mm/s

Gain settings
5, 10 or 20 mm/mV
Report print formats 3+1, 3+3 channel, 6-channel, 12-channel
Rhythm print formats
3-channel or 6-channel with configurable lead groups, or 12-channel
Keyboard type
Elastomer keypad with complete alphanumeric keys, soft-key menu and dedicated function keys
Frequency response
0.05 to 300 Hz

Filters
High-performance baseline filter: AC interface filter 50/60 Hz; low-pass filters 40 Hz or 150 Hz
A/D conversion 20 bits (1.17 microvolt LSB)

Device classification
Class I, type CF defibrillation-proof applied parts

ECG storage
Up to 150 ECGs
Power requirements
Universal AC power supply (100-240 VAC at 50/60 Hz) 50 VA; internally rechargeable battery
Weight
5.1 kg including battery

Dimensions
102h x 432w x 394d mm
 

This Mortara ELI 250 RX ECG machine is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The MAC1200 ECG machine offers a comprehensive ECG solution with practical features that meet the needs of hospitals, clinics, office-based practices and clinical trials. The MAC1200 provides resting ECG's with measurements and interpretation at its most basic level. It also has the facility to provide continuous ECG monitoring of arrhythmia with event documentation and final report.

Stress test program compatible with the MUSE® and CardioSoft® systems (optional).

Features
LCD screen for viewing traces
Automatic, 12 lead simultaneous acquisition
Manual, real time 6-channel
Arrhythmia, continuous monitoring with event documentation
One touch operation for acquisition, analysis, storage and printing minimises training
4 user-definable fields for patient data entry flexibility
Portable, lightweight design with carry handle
Full size paper accommodates multiple standard report formats
Mains and battery operation with automatic recharge
Fully charged battery will provide up to 50 ECG's
40 ECG memory software (optional)
Stress Test software (optional)
Operating modes:
Automatic, 12 lead simultaneous
Manual, real-time 6-channel
Arrhythmia, continuous monitoring with event documentation
Stress test (optional)
 

Specification
Display LCD 320 x 240 pixel, backlit, contrast adjustable
Power supply
95 to 240V, 49 - 64 Hz

Battery operation
NiCad, 18V, 1.3 Ah

Battery charge time
Approximately 4 hours from total discharge

Operating temperature
10 to 40°C

Storage temperature
-30 to 60°C
Operating humidity
25 - 95%

Storage humidity
25 - 95%

Operating pressure
700 to 1060 hPa

Storage pressure
500 to 1060 hPa

Weight
5.6 kgs with battery installed

Dimensions
94h x 370w x 320d mm
 

This MAC1200 ECG machine is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Contact us if you cannot find a solution to your ECG monitoring requirements. We have a whole range of equipment available including Stress Test Systems, Holter monitors and Event recorders.

The MAC1600 ECG machine can be easily configured to meet the needs of nearly every environment. With instant assessment of the ECG signal quality and an easy connection to your ECG cardiology management system, the new MAC1600 could not be smarter.

The MAC 1600 offers more than just acquisition; it’s online editing and re-analysis of ECG waveform capabilities enhance the accuracy of patients’ records.

Features
Soft key menu
7" full-colour digital display
Automatically captures 10-second ECG with one-touch operation
Rhythm ECG mode to continuously review all 12 leads
Arrhythmia mode for an extended review of arrhythmias or events
Integrated handle making transportation easy
Slide out paper drawer
Online editing and re-analysis
Barcode reader option
Automatic storage, transmission and deletion of data
Save up to 100 ECG records
6 or 12 lead display
Supports treadmill, bicycle and master step stress devices

Specifications
Display 7" full colour digital 800 x 480 pixels
Power Supply 100 to 240V, +10-15%, 50-60Hz +/-10%
Battery Operation User replaceable 16.4V 2300AH Lithium Ion
Battery Capacity 50 single page reports (typical) 3 hrs continuous display (without printing)
Battery Charge Time Approximately 2.5 hrs from total discharge
Operating Temperature 10°C to 40°C
Storage Temperature -40°C to 70°C
Operating Humidity 20 - 95% RH
Storage Humidity 15 - 95% RH
Operating Pressure 700 to 1060 hPa
Storage Pressure 500 to 1060 hPa
Dimensions 400h x 350w x 150d mm
Weight 6kgs with battery installed

 This MAC1600 is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The CT6i ECG machine features user friendly controls and settings, and comes complete with an Interpretation and Measurements program.

The A4 presentation means you can print either all 12 leads per page or 4 x 3 leads plus Rhythm Strip, Intervals and Interpretation on one A4 page for easy photocopying and filing of records.

Interpretation and measurements included.

Features
12 channel, A4 presentation, interpretive ECG
Copy button for extra traces
Useful "Leads Off" warning with lead identification
A4 print out with a choice of up to 12 leads per page or 4 x 3 leads plus Rhythm Strip, Intervals and Interpretation
Auto-start one touch automatic operation or manual control if preferred
12 lead simultaneous acquisition
Mains, base line and muscle filters, for clear traces
Interpretation report, with or without complexes, measurements and rhythm strips can be preset for your preferred one touch operation

Specification
Measurement table RR, P, PR, QRS, QT and QTC intervals, and the P, QRS and T axis
Power supply
Mains and battery operation with automatic recharge
Battery Life
400 ECG's when fully charged

Dimensions 104h x 399w x 338d mm
Weight 5 kgs with battery installed

Supplied with mains cable, patient cable, pack of A4 paper, 500 disposable electrodes and alligator clips
 

This CT6i ECG machine is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Contact us if you cannot find a solution to your ECG monitoring requirements. We have a whole range of equipment available including Stress Test Systems, Holter monitors and Event recorders.

The Alaris® GS Syringe Pump has a highly visible display suitable for general ward areas, where accuracy is important, but with quick and easy set up procedures.

The pump is simple to use and operate. The Alaris® GS is compatible with syringe sizes 5, 10, 20, 30 and 50 ml.

Infusion rate range - 0.1 - 200 ml/hour.

Features
Real time clock
Medical Device Interface (MDI)
Event log
Event log events: 1,500
Rate Lock Facility
Auto-night Mode
Pressure display
Pressure alarm level
Pole clamp
Syringe sizes: 5, 10, 20, 30 & 50ml
Bolus infusion rates (user adjustable)
Clear volume
Rate lock
Various alarms
Various extensions sets available
KVO rate: 0.1 - 2.5 ml/h
Near End of Infusion alarm (EOI)

Specification
Infusion rates 0.1 - 200 ml/h
Volume infused range
0.0 - 9990 ml

Drive linearity ± 1%
Volumetric Mean Accuracy ± 2%
Communications Bi-directional IrDa
RS 232 Port Optional
Battery Life 4 hours at 5 ml/h; when fully charged
Battery Run Time Charge 2.5 hours with fast charge to 90% of charge
Class Class 1 Type CF; Electrical Safety Test
Weight
2.7 kgs excluding power cable

Dimensions
121h x 310w x 200d mm
 

This Alaris® GS syringe pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Alaris® GP volumetric pump provides a versatile and flexible platform for infusion therapy which is suitable across a broad range of applications.

The Alaris® GP volumetric pump offers a range of features suited to general fluid, blood transfusion & drug therapy including: intuitive colour coded set loading, easy to clean with fast release door, a wide range of alarms, prompts & warnings.

Infusion rate: 1 - 1200 ml/hr

Volume infused range: 1 - 50,000 ml

Features
Alarm beacon with alarm (red) & warning (amber) indicators
Audible alarm and display messaging with comprehensive protection
Mechanism: four finger displacement peristaltic
Occlusion Settings: 3 levels from L2, L5 (default), L8
Designed to fit into the Alaris® Gateway Workstation
Easy to clean
Fast release door
Large display
User friendly interface
Door Removal: for cleaning and maintenance
Various clamps, valves, filters and lines available
 

Specification
Infusion rate range 1 - 1200 ml/h
Volume to be infused range up to 10000 ml
Volume infused range 1 ml to 50,000 ml
Volumetric accuracy ± 5% (nominal)
Mechanism Four Finger Displacement Peristaltic
Display Mono 240 x 240 pixels
KVO rates 5 ml/h or set infusion rate if lower
Occlusion settings 3 levels from L2, L5 (default), L8
Battery type Rechargeable NiMH 9.6V 2.4Ah nominal
Battery Run time Operates for 4hr from full charge at 125 ml/h
Recharge time 2.5 hour from discharge to 95% charge
Standards IEC/EN60601-1, -1-2, -2-24
Electrical protection Class I, Type CF (defibrillation proof)
AC power requirements 100-230 VAC, 50-60Hz. 60VA (maximum)
Dimensions 225h x 140w x 148d mm
Weight 2.5kgs

This Alaris® GP volumetric pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study
 

The Alaris® GW volumetric infusion pump is both small and light making it unusually compact. It can also be integrated into a multi-pump infusion system.

This volumetric infusion pump uses dedicated sets with or without anti-free-flow valve. It has a simple user interface allowing settling of basic infusion parameters.

An intelligent pressure sensor will detect many changes in the infusion conditions, kinked tubing for example.

Infusion rate: 1 - 999 ml/h

Features
Small and light
Easy to load and operate
Piggybacking infusions can be added
Pumping mechanism: peristaltic
Standard administration set: has anti-reflux valve, set with anti-free-flow value (optional)
Delivery options:
rate and volume
volume over time
primary/secondary infusions
bolus
rate titration (requires key press to confirm)
micro mode (allows setting rate in resolution of 0.1 ml/h increments)
KVO
VTBI
VI
Alaris® Gateway compatible
Various alarm conditions

Specification
Volume infused indicator
1 - 990 ml/h (standard mode)

0.1 - 999 ml/h (micro mode)
KVO rate Configurable (OFF, 1.0 to 5.0 ml/h)

Bolus rate and volume
1 - 999 ml/h, volume 0.1 - 99 ml

Accuracy
± 10% over one hour at 1 - 999 ml/h

Air in line detection
Configurable single bubble of 50, 10, 200 or 500 µl, cumulative
Occlusion detection Lo (250 mmHg), Norm (350 mmHg, Hi (500 mmHg)
Power supply
220 - 240 VAC, 50/60 Hz, 10 VA

Battery
Rechargeable NiMH automatically charges when connected to AC

Battery life
> 6 hrs at 25 ml/h, > 4 hrs at 125 ml/h, > 2 hrs at 999 ml/h

Weight
1.5 kgs (excluding power cable)

Dimensions
140h x 137w x 105d mm
 

This Alaris® GW infusion pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The 3400 syringe pump has wide appeal because of its wide range of features. It can infuse virtually any IV drug with a range from 0.1 - 1200 ml/hr. It has multiple unit selection, syringe size flexibility, simple operation, is AC or battery operated and has an accuracy of ± 2%.

The adjustable occlusion pressure allows for a range of applications from intravenous to spinal infusions.

Infusion rate range - 0.1 - 1200 ml/hr

Features
Enhances patient safety and accuracy
Continuous infusion mode
Polemount / table top mountable
Preset (hands-free) and (hand-on) bolus
High bolus infusion rate
Internal battery
Accepts and automatically senses syringe sizes from the major manufactures
Volume infused totaliser
Adjustable occulsion pressure
Wide infusion rate range - 0.1 - 1200 ml/hr
Multiple unit selection - ml/hr, ug/hr, mg/hr, ug/kg/hr, mg/kg/hr, ug/kg/mn, mg/kg/mn
Syringe size flexibility - 5ml, 10ml, 20ml, 30/35ml, 50/60ml
Simple operation - menu driven display
RS 232 communications - can be remotely controlled/monitored
Cost effective - no dedicated disposables
 

Specification
Continuous infusion 0.1 - 400 ml/hr, in 0.1 ml increments
Bolus infusion 0.1 - 1200 ml/ hr, in 0.1 ml increments
Volume infused totaliser 0 - 999.9 ml in 0.1 ml increments

Accuracy
± 2%

AC power supply
100 - 240V at 50/60 Hz, 40VA with backup battery operation

Battery type
Sealed lead acid (Cyclon)

Battery life
10 hours when fully charged at 400 ml/hr

Operating temperature 5 to 40°C

Operating humidity
30 - 70% RH

Operating pressure
700 - 1060 hPa

Weight
3.5 kgs including batteries and pole clamp

Dimensions
115h x 325w x 195d mm
 

This 3400 Syringe Pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The 3100 syringe pump is simple to use and easy to learn. It is suitable for a range of applications from routine ward use to neonatal infusions.

The internal occlusion pressure detector has a time to alarm response and the high level of short and long term flow rate accuracy making it ideal for neonatal and high risk infusions.

Accommodating syringe sizes 20, 30 and 50/60 ml. Infusion rate range - 0.1 - 199.9 ml/hr.

Features
Continuous infusion mode
Volume unit (ml/hr) infusion programming
Accepts and automatically senses the size of syringes from the major manufacturers
Adjustable occulsion pressure
Occlusion alarm
Volume infused totalizer
Excellent flow-rate accuracy
AC Powered with backup battery operation
Automatic syringe size-sensing
Syringe size flexibility: 20ml, 30ml, 50ml/60ml
Simple operation
 

Specification
Infusion rate 0.1 - 199.9 ml/hr
Volume infused counter 0 - 999.9 ml (in 0.1 ml increments)
Accuracy
± 2% over a complete syringe length

AC power supply
220 - 240 V at 50/60 Hz, 15VA

Battery type Sealed lead acid (Cyclon)

Battery life
3 hours when fully charged

Fluid ingress
IPX1 protection against drops of water falling vertically

Operating temperature
5 to 40°C

Weight
3.5kgs including batteries and pole clamp

Dimensions 115h x 325w x 195d mm
 

This 3100 Syringe Pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Alaris® GH syringe pump is intelligent and highly responsive and delivers drugs in the safest possible way.

It has a large easy to read display, intuitive keyboard, alarm beacon and on-screen drug labelling.

It can be used with the Guardrails® Suite of safety software providing the power to identify, track and prevent many of the harmful IV medication errors.

Infusion rate: 0.1 - 1200 ml/h (dependent upon syringe)

Features
Simple to use and operate
Large graphics format display
Medical Device Interface (MDI): a unique mounting mechanism
Event logging records operation of pump
Advanced communications and nurse call interfaces
Configurable drug names
Syringe size/type: 5, 10, 20, 30 or 50 ml disposable syringe of type specified on pump
Latex free construction
Basic functions:
Purge function
Bolus infusion
Pressure level
Rate titration
Clear volume
Rate lock
24 hour log
Set VTBI over time

Specification
Max. infusion rate 0.1 - 200 ml/h
Max. bolus rate 10 - 1200 ml/h
Critical volume
0.5 ml with a 50 ml syringe

Purge specifications
Max. rate 100 - 500 ml/h

Purge volume range
0.5 - 5 ml

Volume to be infused
0.1 - 100 ml

KVO rate
0.1 - 2.5 ml/h

Accuracy
± 2%

Battery type
Rechargeable sealed NiMH (charges automatically when connected via AC)

Battery life > 4 hrs from fully charged at 5 ml/h

Battery charge time
2.5 hrs from discharge to 90%
Occlusion settings
11 levels from L0 - L10

AC power requirements
115 - 230 VAC, 50/60 Hz, 20 VA

Weight
2.7 kgs

Dimensions
117h x 310w x 200d mm
 

This Alaris® GH syringe pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The IVAC® P7000 syringe pump is a variable pressure pump that sets new standards in design and performance.

Using in-line pressure monitoring technology, this syringe pump administers critical drug infusions with accuracy and reliability, helping to simplify clinical procedures and saving valuable nursing time.

Infusion rate - 0.1 - 1200 ml/hr depending on the syringe selected.

Features
Infusion rates: 0.1 - 1200 ml/h
Pole clamp
Real time clock
Syringe size flexibility: 5ml, 10ml, 20ml, 30ml, 50ml, 100ml
Event log
Event log memory: 800
Automatic bolus reduction
Rate lock facility
Pressure display
Drug names
Volume limit
Volume infused (VI): 0.0 - 999ml
Pressure alarm level
 

Specification
Infusion rate range
0.1 - 1200 ml/hr depending on syringe size

Bolus rate range
10 - 1200 ml/hr

Bolus limit
25.0 ml

Purge rate
100 - 500 ml/hr

Volume infused rate
0.0 ml - 9990 ml

KVO rate
stop, 1 ml/hr, 2 ml/hr or continue at set rate
Volume to be infused
0.1 - 100 ml, 1 min - 24 hr
Volumetric mean accuracy
± 2%

Battery type
Rechargeable sealed lead acid
Battery life
4 hours at 5 ml/h when fully charged

Battery charging time
24 hours to fully charge

AC power supply
115 - 240 VAC, 50/60 Hz, 20VA

Weight
3.5 kgs (excluding pole clamp and power cable)

Dimensions
115h x 400w x 180d mm
 

This P7000 Syringe Pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Omnifuse syringe pump is designed to provide a single pump which can be used in a wide variety of situations.

The lockable cover, with optional keypad lock capability, provides increased safety for all infusions. The Omnifuse has a wide range of syringe size flexibility from 2ml up to 50ml/60ml.

Infusion rate range 0.1 - 800 ml/hr* or 0.01 - 13 ml/min*

Features
Mass unit programming ranges
Flexibility
Drug protocols
Advanced infusion modes
Infusion programming in mass units
Safety
Volumetric accuracy of ± 2.0%
Rapid start up performance
Occlusion detection
Post occlusion bolus reduction
Paediatrics / Neonatal
Compatible with 2ml syringes
Can be used with in-line pressure sensing
Can be programmed in nanograms
Sleep Mode
Comprehensive technician software package
Syringe size flexibility: 2ml, 3ml, 5ml, 10ml, 20ml, 30ml, 50ml/60ml
 

Specification
Infusion modes
Continuous, preset times, preset volume, intermittent, circadian rhythm

Infusion rate range
0.1 - 800 ml/hr* increments of 0.1 up to 100, 1 above 100

0.01 - 13.0 ml/min* increments of 0.01 up to 10,0.1 above 10
Bolus rate range
0.1 - 800 ml/hr* increments of 0.1 up to 100, 1 above 100

KVO rate range
0.05 - 2 ml/hr

Purge rate
50, 100, 200, 400 or 800 ml/hr*

Accuracy
± 2%

History
Log of up to 3,000 events

AC power supply
100 - 240V at 50/60 Hz, 50W

Battery type
Sealed lead acid (Cyclon)

Battery life
10 hours at 5 ml/hr

Battery charge time
10 hours to full charge

Weight
3.5 kg

Dimensions
92h x 384w x 170d mm
 

*upper limit dependant on syringe size

This Omnifuse Syringe Pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The IVAC® 597 and 598 volumetric infusion pumps reduce time-to-alarm due to a lower occlusion pressure setting. They have easy to read control panels, coupled with a large LED display, these volumetric pumps are easy to use, compact and lightweight and can be used in a variety of situations.

The principle difference between the IVAC® volumetric pumps, models 597 and 598, is that the model 597 has a primary/secondary infusion facility.

Infusion rate - 1 - 999 ml/hr.

Features
Quick start mode
Automatic control of infusion rate
Automatic shut-off and activation of audible and visible alarms to a wide range of situations
Volume to be infused capabilities with automatic switchover to ‘keep vein open' (KVO) rate
Dual rate capability (597 only)
Diagnostic alarm messages activated by low battery, discharge battery, open door, internal malfunction, set out, upstream / downstream occlusion and air-in-line
Reads out displays of infusion rate, volume infused, volume to be infused and KVO
Run indicator flashes when instrument is operating
Pole clamp available
Flow sensor optional
Single channel
Variable pressure
Various alarms displayed

Specification

Model 598 Model 597
Rate range 1-999 ml/h in 1ml/h increments 1-9999 ml/h in 1ml/h increments
Volume infused 0 - 9999 ml in 1 ml increments Total: 0-9999 ml in 1ml increments Secondary: 1-999 ml in 1ml increments

Volume to be infused range 1 - 9999 ml in 1 ml increments
Primary: 1-9999 ml in 1ml increments. Secondary: 1-999 ml in 1ml increments.

KVO rate 5 ml/h or current set rate if less than 5ml/h
5 ml/h or current set rate if less than 5ml/h

Occlusion pressure
6 to 8 PSI (nominal)
6 to 8 PSI (nominal)

Recharge time Approx. 24 hours when fully discharged
Approx. 24 hours when fully discharged

Indicators
AC power light AC power light
Read out displays of infusion rate, volume infused, volume to be infused and KVO Read out displays of infusion rate, volume infused, volume to be infused and KVO
Run indicator flashes when instrument is operating Run indicator flashes when instrument is operating

This IVAC® Infusion Pump is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The range of analytical balances are designed to deliver the ultimate in speed and accuracy in an easy-to-use and reliable model. The attractive functional design and advanced features make analytical balance your best choice for your laboratory balance.

All the features are packaged into a high power, high performance balance, saving you valuable time and resources.

Readability: 0.0001g. There are 4 models in the range with varying maximum capacities - 120g - 250g.

Features
Metal casing
Force restoration mechanism
RS-232 bi-directional interface
Accessories interface
Security locking point
Calibration with internal mass
GLP print outs
Date and time
Colour coded keys
Backlit LCD with dual display
Up to 16 weighing units (including one custom unit)
Capacity tracker
Glass weighing chamber
Multilingual display
Parts counting
Quality control checks made simple
Percentage weight calculations
Control fluctuations while you weigh
Calculate and measure weights in a batch

Specification
Maximum Capacity 120g - 250g (depending on model)

Readability 0.0001g
Tare Range Full
Repeatability (S.D.) 0.00015 - 0.0002g (depending on model)

Linearity ± 0.0002g
Pan Size 90 mm Ø
Interface Bi-directional RS-232 (standard)
Calibration Calibration with internal or external mass
Display Backlit LCD with dual digits and capacity tracker
Power Supply 15VDC, 50/60Hz, 800mA (Input Voltage 100-240V, 50/60Hz)
Operating Temperature 10°C to 40°C
Housing Die cast aluminium with glass weighing chamber
Draught shield Supplied as standard
Dimensions 275h x 256w x 524d mm
Weight 12 kg
Units of Measurement g, mg, ct, Oz, d, GN, Ozt, dWt, MM, TL.H, TL.S, TL.T, ti, N, T, custom unit

Applications
Weighing
Net/Total
Check weighing
Percentage weighing
Weight accumulation
Averaging
Parts counting
Animal/dynamic weighing
Density determination
Below balance weighing
 

The range of AQT compact balances are designed to be a low cost solution to many weighing situations.

The range of compact balances are designed to be quick, simple and easy-to-use. A basic balance for simple weighing.

Readability to 0.01g depending on model. There are 7 models in the range with varying maximum capacities - 200g - 5000g.

Features
7 compact balance models in the range
Stainless steel pan
Clear backlit LCD display
Auto power off
Mains or battery operated
Mains adapter supplied as standard
Several weighing units
Draft shield supplied as standard
Integral security bracket
Adjustable feet
Low battery, stable and zero indicators
Push button calibration using external mass

Specification
Maximum Capacity 200 - 5000g
Readability 0.01 - 1g
Resolution
1:20000 to 1:2000
Repeatability (S.D.) 0.02 - 1g
Linearity ± 0.02 - 1g
Pan Size 130 mm Ø
Other features
Low battery, stable and zero indicators

Calibration Push button using external mass

Display 6 digit LCD, 15mm digits with backlight

Power Supply 12VAC @ 150mA adapter or 6 x AA batteries

Operating Temperature 0°C to 40°C
Housing ABS plastic

Draught shield Supplied as standard
Dimensions 70h x 195w x 240d mm
Weight 1.2 kg
Units of Measurement g, kg, lb, Oz

Typical stabilisation time 2 sec
 

The range of precision balances are designed to deliver the ultimate in speed and accuracy in an easy-to-use and reliable model. The attractive functional design and advanced features make this analytical balance your best choice for your laboratory balance.

All the features are packaged into a high power, high performance balance, saving you valuable time and resources.

Readability to 0.001g depending on model. There are 8 models in the range with varying maximum capacities.

Features
8 precision balance models in the range
Metal casing
Force restoration mechanism
RS-232 bi-directional interface
Accessories interface
Security locking station
Calibration: internal or external, selectable automatic calibration due to change in time or temperature
GLP print outs
Date and time
Glass weighing chamber
Colour coded keys
Backlit LCD with dual display
Up to 18 weighing units (including one custom unit)
Draft shield supplied as standard with models with 0.001g readability
Capacity tracker
Multilingual display
Calculate and measure batch weights

Specification
Maximum Capacity 150 - 4500g (depending on model)

Readability 0.001 - 0.01g (depending on model)

Tare Range Full
Repeatability (S.D.) 0.001 - 0.01g (depending on model)
Linearity ± 0.002 - 0.02g (depending on model)

Pan Size 140 x 140 mm or 192 x 192mm (depending on model)

Interface Bi-directional RS-232 (standard)
Calibration Internal or external, selectable automatic calibration

Display Backlit LCD with dual digits and capacity tracker
Power Supply 15VDC, 50/60Hz, 800mA (Input Voltage 100-240V, 50/60Hz)
Operating Temperature 10°C to 40°C
Housing Die cast aluminium with glass weighing chamber
Draught shield Supplied as standard
Dimensions 104h x 251w x 358d mm
Weight 5.5 kg
Units of Measurement g, mg, ct, Oz, d, GN, Ozt, dWt, MM, TL.H, TL.S, TL.T, ti, N, T, custom unit

Applications
Weighing
Net/Total
Check weighing
Percentage weighing
Weight accumulation
Averaging
Parts counting
Animal/dynamic weighing
Density determination
Below balance weighing
 

Each Vision model is chosen for its particular features to fill many microscopy needs in a variety of applications. Our line ranges from inexpensive quality microscopes, to full-featured professional laboratory instruments, with various options inbetween.

Vision microscopes are equipped with precision DIN* optics (*Deutsche Industrie Normen, a recognised universal industry standard for microscope objectives). All microscopes are packed in fitted protective Styrofoam and various upgraded accessories are available upon request.

Models Available in the Vision Range
Advanced Microscopes
Dual View Microscopes
Infinity Microscopes
Inverted Microscopes
Medical and Research Microscopes
Professional Microscopes
Stereo Microscopes
Stereo Zoom Microscopes
Trinocular Microscopes
Digital/Video Eyepieces
Vision Accessories
Laboratory Disposables
Laboratory Microscopy Equipment
 

Specification
Please view the Vision Microscope Brochure for specifications of individual models

This Vision Microscope Range is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This tube roller provides highly efficient rocking and rolling action for the complete mixing of all liquid-solid suspensions with minimum aeration.

Purpose built blood tube mixers with drip tray in 5 roller version available with fixed speed. A 10 roller version is also available with fixed speed or variable speed.

Model Spiramix 5 Spiramix 10 Spiramix 10
Speed 50 (fixed) 50 (fixed) 5 - 50 (variable)
Weight 5.5 kg 9.0 kg 9.0 kg
No. of Rollers 5 10 10

Features
Microprocessor controlled DC motor speed controller
Ideal with all types of glass and plastic tube including those with soft rubber stoppers
5 rollers (10 rollers optional)
Fixed speed
Variable speed (optional)
Supplied with a drip tray

Specification
Roller length
320mm
Roller speeds
5 - 51 RPM

Accuracy ± 1 rpm

Operating temperature 5 to 40°C

Relative humidity 90% max

Power supply
24V

Weight (5 rollers)
5.5 kg

Weight (10 roller)
9.0 kg

Dimensions (5 rollers)
100h x 225w x460d mm

Dimensions (10 rollers)
100h x 410w x 460d mm
 

This vortex mixer can be used for gentle mixing to vigorous agitation. Choose between ‘touch’ mode or continuous operation simply by pressing a button on the fascia.

Robust die-cast body avoids unnecessary movement during use. It has an ergonomic low profile design making everyday vortexing comfortable for the user.

Variable speed: 200 - 2500 rpm

Features
Integral retort rod fixing allows vessels to be secured above the vortex action for long-term mixing
Intermittent or continuous mode
Stable low profile body
Robust die-cast construction
Variable speed control
‘Touch’ mode
Can mix with a variety of other vessels when used with the accessory pack
Accessory pack (optional):
plastic cradle for standard microtitre plate
circular foam insert for beakers and flasks (up to 500ml)
rectangular foam insert (8 x 0.2ml, 8 x 0.5ml and 16 x 1.5ml microcentrifuge tubes)
solid rectangular foam insert (blank for custom holes)

Specification
Speed
200 - 2500 rpm

Orbit diameter
4.2 mm

Electrical supply
90-240V, 50/60 Hz, 20 W

IP rating
31

Weight
3.2 kg

Dimensions
78h x 135w x 215d mm
 

This small table top -20°C freezer is ideal for sites where space is a concern.

The table top -20°C freezer is an ideal solution to storage of samples and materials in a clinical setting.

The units are energy efficient and cost effective providing the perfect solution to your refrigeration requirements.

A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Soft line design with integrated handle
Thermostat control dial
Reversible door hinge
Adjustable wire shelf
Manual defrost
Adjustable feet
Free standing

Specification*

Capacity 36 litres
Voltage
220 - 240V
Frequency
50 Hz

Sound decibel rating
41.5 db (A)

Freezing capacity
1.8 kg/24 hours
Star rating
4 star

Energy efficiency class
A

Weight
19 kgs
Dimensions
525h x 440w x 490d mm
 

*specification may vary according to model received

Our range of medical freezers is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This -20°C table top freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This undercounter -20°C freezer is ideal for sites where space is available under counters/worktops.

The undercounter freezer is an ideal solution to storage of samples and materials in a clinical setting. The units are energy efficient and cost effective providing the perfect solution to your refrigeration requirements.

A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Soft line design with moulded handle
Adjustable thermostat control dial
Reversible door hinge
3 freezer baskets
Manual defrost
Adjustable feet
Free standing

Specification*
Capacity 68 litres
Voltage 220 - 240 V
Frequency 50 Hz
Energy efficiency class A
Sound decibel rating 39 db (A)
Number of compressors 1
Weight 30 kg
Dimensions 890h x 535w x 545d mm

Our range of medical freezers is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This -20°C undercounter freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The -20°C 116 litre laboratory freezer has an integral control panel on the outside of the fridge which sits flush with the door and its easy to use design makes checking the internal temperature straightforward.

As there is no need to open the door to check the temperature it keeps the internal air temperature more stable. The spark-free interior reduces the risk of internal explosion.

Come complete with door locks and two keys ensuring that only authorised individuals are able to access them

 A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Solid, hinged, reversible door
Lock
Adjustable feet
Temperature display in the panel
Temperature alarm
4 wire drawers
Manual freezer defrost

Specification*

Colour White
Net capacity 94 litres
Gross Capacity 116 litres
Operating Temperature - 18°C to - 25°C
Door Type Hinged, reversible
Door Style Solid
Climate Class N
Voltage Suppply 230 V / 50 Hz
Weight 38 kg
Dimensions 863h x 558w x 600d mm

*specification may vary according to model received

Our range of pharmacy refrigerators is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This 116 litre laboratory freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The -20°C benchtop laboratory freezer has an integral control panel on the outside of the fridge which sits flush with the door and its easy to use design makes checking the internal temperature straightforward.

As there is no need to open the door to check the temperature it keeps the internal air temperature more stable. The spark-free interior reduces the risk of internal explosion.

Come complete with door locks and two keys ensuring that only authorised individuals are able to access them.

 A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Solid, hinged, reversible door
Lock
Fixed feet
Temperature display in the panel
Temperature alarm
1 wire shelf
Manual freezer defrost

Specification*

Colour White
Net capacity 38 litres
Gross Capacity 50 litres
Operating Temperature - 18°C to - 20°C
Door Type Hinged, reversible
Door Style Solid
Climate Class N
Voltage Suppply 230 V / 50 Hz
Weight 17 kg
Dimensions 562h x 500w x 510d mm

*specification may vary according to model received

Our range of freezers is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This 50 litre medical/laboratory freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

All stainless steel construction, this 35 litre capacity table top -85°C freezer incorporates a programmable controller with alarm.

It is suitable for a variety of uses due to its compact design and noise-cancelling cooling aggregate.

The digital display shows the set temperature and the actual temperature. It has a visual and acoustic alarm and a 10mV/K output for connecting a temperature recorder.

Features
Large interior space
Improved vacuum isolation
Low power consumption
Completely stainless steel casing
Foamed form door with double isolation ring
Stainless steel inside chamber for easy cleaning
Ventilation grid on the back, left and right sides
Control unit with foil keyboard
Lockable door
Optical and audio alarms
RS 485 interface

Specification
Temperature range -50 to -85°C
Control precision
± 1 K
Effective space
35 litres

Inside material Stainless steel 43 01

Casing material
Stainless steel 4016

Surrounding temperature
+12 to +30°C

Power requirements
230V / 50 Hz

Weight
81 kgs

Internal dimensions 280h x 425w x 300d mm

External dimensions
540h x 580w x 765d mm
 

This -80°C table top freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This is one of the most simple ultra low temperature freezers on the market. With a single compressor the -85°C chest freezer provides low noise, low energy consumption and a compact design.

The -85°C chest freezer demonstrates high performance freezing with an integrated cooling system.

A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Single compressor
Porthole for installation of PT100/CO2 back up
Sub lids
Low heat output
Lid lock
3 pin PT100 sensor specially designed for ultra low temperature
Advanced battery back up (72 hrs) digital display
Visual and acoustic alarms
Power failure, high/low temperature, probe and Eprom failure alarms
Advanced battery back-up (min. 72 hours)
Max. capacity for example: 4000 vials

Specification
Capacity 74 litres, 5 racks

Temperature range -40 to -85 °C
Compressor
Single compressor (<48 dbA)

Energy consumption
Approx. 500W heat output
Power supply
230V, 50/60 Hz

Power consumption
7.7 KWH / 24 H

Weight
49 kgs

Internal dimensions
483h x 390w x 390d mm

External dimensions
875h x 550w x 645d mm
 

This -85°C chest freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This 101 litre capacity under counter -80°C freezer incorporates a programmable controller and alarms.

It has an inner door and two internal shelves. A clear display shows the current temperature.

Specification
Temperature range -50°C to -86°C
Internal dimensions 64h x 48w x 33d cms
External dimensions 83h x 90w x 56.6d cms
Weight 116 kgs

This -80°C freezer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Developed for handling very cold objects, typically those stored in the vapour phase of liquid nitrogen (in the range -120°C to -190°C).

The outer layer is of waterproof material to resist condensed water on cold surfaces, but remains permeable to gases (including water vapour) so that there is no clammy condensation within. To reduce bulk around the fingers, the stitch holes have not been sealed. In normal use this has not proved a problem, however, the gloves should not be immersed in liquid nitrogen and it is not advisable to use them above -80°C. Very durable, they retain their flexibility (albeit with some stiffening) for long periods in cold atmospheres. Polymide outer material, polyofin with some polyester as filling and cotton liner.

Specification

Available in 3 range - wrsit length, elbow length and shoulder length all available in small, medium and large.

 Crygenic gloves are available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This small table top refrigerator is ideal for sites where space is a concern. The table top refrigerator is an ideal solution to storage of samples and materials in a clinical setting.

The units are energy efficient and cost effective providing the perfect solution to your refrigeration requirements.

A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Soft line design with integrated handle
Adjustable thermostat
Reversible door hinge
In-door storage
Adjustable wire shelf
Manual defrost
Adjustable feet
Free standing
Small freezer/ice compartment
 

Specification*

Capacity 45 litres

Voltage 220 - 240V

Frequency
50 Hz

Sound decibel rating
41.5 db (A)

Energy efficiency class
A

Refrigerant
R600a

Weight
16 kgs

Dimensions
525h x 440w x 490d mm
 

*specification may vary according to model received

Our range of medical refrigerators is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This table top refrigerator is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.
 

This undercounter refrigerator is ideal for sites where space is available under counters/worktops.

The undercounter refrigerator is an ideal solution to storage of samples and materials in a clinical setting. The units are energy efficient and cost effective providing the perfect solution to your refrigeration requirements.

A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Soft line design with moulded handle
Adjustable thermostat control dial
Internal light
Reversible door hinge
3 in-door storage shelves
2 adjustable glass shelves
Automatic defrost
Adjustable feet
Free standing
 

Specification*

Capacity 102 litres

Voltage
220 - 240V

Frequency
50 Hz

Energy efficiency class
A

Sound decibel rating
39 db (A)

Weight
27 kgs

Dimensions
839h x 494w x 494d mm
 

*Specifications may vary according to model received

Our range of medical refrigerators is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This undercounter refrigerator is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This 82 litre benchtop medical/laboratory refrigerator has an integral control panel on the outside which sits flush with the door. Its easy to use design makes checking the internal temperature straightforward. As there is no need to open the door to check the temperature, it keeps the internal air temperature more stable. It also features automatic defrost to ensure more efficient cooling.

The spark-free interior reduces the risk of internal explosion. Security is essential in laboratories so this fridge come complete with door locks and two keys.

 A minimum/maximum thermometer is included as standard with rental orders (optional extra for purchased orders).

Features
Open door sensor
Lock
Fixed feet
Temperature display in the panel
Temperature alarm
2 shelves
1 wire drawer
Interior light
Automatic fridge defrost

Specification*

Colour White
Net capacity 67 litres
Gross Capacity 82 litres
Operating Temperature + 2°C to + 10°C
Door Type Hinged, reversible
Door Style Solid
Climate Class N
Voltage Suppply 230 V / 50 Hz
Weight 27.5 kg
Dimensions 660h x 502w x 540d mm

*specification may vary according to model received

Our range of refrigerators is extensive. Please contact us for further details if you do not find a model that meets your requirements.

This medical/laboratory refrigerator is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

SAFETY, PEAK PERFORMANCE AND COST SAVINGS.... An innovative approach employing dry haematology reagents instead of the bulky reagents utilised by other methods. Nothing less than a revolution in the way your in-office laboratory can perform CBC testing - more easily, more efficiently, hassle-free!
 

The QBC STAR™ Point Of Care Haematology system can change the way you collect and analyse samples. The difference lies in the QBC STAR™ tube. It is flexible enough to use for both venous or capillary samples. Unlike other haematology systems, when performing a finger puncture you can use the QBC STAR™ tube as the single vehicle for collection and analysis.

The dry reagents contained within the tube facilitates testing and analysis - safely, accurately and without the liquid reagents and the liquid biohazard waste of impedance systems. The clinician simply fills the safety tube with the blood sample and places it in the instrument.

Exceptional ease of use:
When it comes to operation, the QBC STAR™ system brings new meaning to the word simple. Unprecedented ease of use with one step, one button operation to provide a fully automated CBC analysis. With minimal training, non-technical personnel can perform a CBC test with accuracy.

When it comes to operation, the brings new meaning to the word simple. Unprecedented ease of use with one step, one button operation to provide a fully automated CBC analysis. With minimal training, non-technical personnel can perform a CBC test with accuracy.

No user Calibration is needed - EVER!
Maintenance is virtually unnecessary
Every sample processed is calibrated by the QBC STAR™
Entirely self-contained unit measuring only 16" x 16".
Exceptional reliability.
 

Clinically significant parameters:
Haematocrit
Haemoglobin
MCHC
Platelet count
White blood cell count
Granulocyte count
Granulocyte percentage
Lymphocyte / monocyte count
Lymphocyte / moncyte percentage.
After analysis the QBC STAR™ displays the nine clinically significant parameters, both on the LCD screen and on a hard copy printout for records.

The WBC system is a unique point-of-care testing system for the quantitative determination of white blood cell (WBC) count. It has proven, reliable microcuvette technology, lab quality results are obtained from a finger stick in minutes.

The WBC system only requires 10 µL of whole blood from a finger-stick or a venous EDTA sample. A haemolysing agent lyses the red cells in the microcuvette and a staining agent colours the white cells. An image is taken of the stained white cells and the number of cells is then counted by image analysis in the analyser.

Unlike conventional laboratory methods, which measure red and total blood cell counts; the WBC system provides quantitative results of a patient's white blood cell count in about 3 minutes. This will assist the physician in evaluating a patient's condition, while the patient is still in his/her office.
Features
Lab accurate results in about 3 minutes
White blood cell count in the range of 0.3 - 30 x 109/L
Simple operation
No calibration or instrument adjustment needed
Convenient cuvette technology
Capillary/venous samples can be used - 10µL sample size
Portable - AC adaptor or battery operated

Specifications
Measurement range
0.3 - 30 x 109/L
Accuracy
Correlation of 0.99 when compared with automatic cell counters

Results
Displayed after 3 minutes

Sample volume
10 µL

Sample material
Capillary or venous (EDTA) whole blood
Calibration
Factory calibrated and no further calibration required

Power
AC adaptor or 6 x AA batteries

Storage temperature
Analyser - 0°C - 50°C, microcuvettes 15°C - 35°C
Weight
600g

Dimensions
133h x 185w x 120d mm
 

This White Blood Cell Count analyser is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study
 

The Triage® drugs of abuse panel is a small, handheld urine test that provides qualitative results for up to 9 commonly abused drugs in about 10 minutes. The range of panels provide an extensive range of testing
Features
Excellent discrimination around assay cut offs
Ensures accurate patient and proficiency results
Provide superior specificity
Minimise false negative results
Template permits hard copy archiving of results
Greater cost efficiency
Accepted by COLA, JCAHO and CAP
Positive specimens produce a clear visual result
Negative specimens do not produce a visual result

Test Panels
Tests a wide range of analytes -

Amphetamine (AMP), Methamphetamine (mAMP), Barbiturates (BAR), Benzodiazepines (BZO), Cannabinoids (THC), Cocaine (COC), Opiates (OPI), PCP (PCP), Tricyclic antidepressants (TCA), Methadone (MTD), Propoxyphene (PPX) and Acetaminophen.

TOX Drug Screen
AMP, mAMP, BAR, BZO, THC, COC, OPI, PCP, TCA, MTD, Acetaminophene
DOA Panel
AMP, mAMP, BAR, BZO, THC, COC, OPI, PCP
DOA Panel + TCA AMP, mAMP, BAR, BZO, THC, COC, OPI, PCP, TCA
DOA Panel + MTD
AMP, mAMP, BAR, BZO, THC, COC, OPI, TCA, MTD

DOA Panel + PPX
AMP, mAMP, BAR, BZO, THC, COC, OPI, PCP, TCA, PPX

Express Test 5
AMP, mAMP, THC, COC, OPI, PCP
 

These Triage® Drugs of abuse panels are available for purchase for your clinical trial. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Albumin System can be used for the quantitative determination of low levels of albumin in urine for the purpose of screening for, diagnosing, monitoring and supporting the clinical evidence in the treatment of microalbuminuria.
The system consists of a analyser and individually packaged microcuvettes. The reaction in the cuvette is based on a immunoturbidimetric reaction. The turbidity once formed is measured photometrically at 610 nm. With three simple steps a quantitative result is achieved within 90 seconds!
Features
Excellent precision and accuracy
Quantitative results within 90 seconds
Factory calibrated instrument
Samples up to and including 2000 mg/L can be obtained with samples diluted with isotonic sodium chloride
The analysis can be performed with spot urine, preferably first morning urine, as well as urine collected overnight or during 24 hours
Minimal maintenanc
can be used by non-laboratory personnel after a brief training session (can be provided by Woodley'sBiomedical Scientists)

Specifications
Measurement range
5 - 150 mg/L

Linearity
Correlation of 0.94 when compared to laboratory methods

Precision
SD less than or equal to 3 mg/L

Results
Displayed within 90 seconds

Sample volume 18 µL

Specimen collection
Spot urine, preferably first morning urine, as well as urine collected overnight or during 24 hours
Calibration
Factory calibrated against a turbidimetric method traceable to CRM 470

Quality control
Internal electronic "selftest"

Power
AC adaptor

Operating temperature
15°C - 30°C
Storage temperature
Analyser - 0°C - 50°C, microcuvettes - 2°C - 8°C
Weight
350g

Dimensions
170h x 115w x 100d mm
 

This Albumin 201 analyser is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Optium Xceed™ glucometer system has a simple 2-step testing procedure to measure blood glucose and ketones. Unique chemistry minimises the effects of interfering substances.

Specially designed end-fill/top-fill test strip with visual confirmation, which makes sample application simpler and more flexible.

Supplied with Easy Touch™ lancing device, 10 lancets and carry case.
Features
Blood glucose and blood ketone testing
Compact, lightweight and ergonomically designed
Large, clear display with backlight
Test on areas other than your fingertip
Sample type: whole capillary blood
Small blood sample (only 0.6µL)
Uses TrueMeasure™ Technology
Memory holds 450 test results
Glucose averaging: 7, 14, 30 days
Very fast test time (5 seconds)
Upload results to your PC with Precision Link Direct V2.6
Uses Optium™ blood glucose test strips and Optium™ blood ketone test strips
Simple icon-driven menu
Simple to use buttons
No manual coding
Prevents the use of expired test strips
Latest technology without the need to retrain

Specifications
Blood glucose range
1.1 - 27.8 mmol/L

Blood ketone range
0.0 - 8.0 mmol/L

Blood sample application
End-fill or top-fill with visual confirmation

Memory
Up to 450 events

Power source
One coin cell lithium replaceable battery

Battery life
Approx. 1,000 tests

Assay method
Amperometry

Automatic shut off
One minute after last user action

Haematocrit range
30 - 60%

Measurement units
mmol/L

Operating humidity
10 - 90%

Weight
42g including battery

Dimensions
29h x 21w x 17d mm

This Optium Xceed™ Glucometer is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Significantly reduce the time to treatment with panel tests. The more quickly you identify high-risk ACS, the sooner therapy can begin, saving time, money, heart muscle and especially lives. This is a simple, hand held cardiac marker panel tests which supports the ACC/AHA guidelines and recommendation for diagnosis of MI. These clinically proven products quickly and accurately determine elevations of multiple cardiac markers - enabling health care providers to easily assess and diagnose chest pain at the decision point.

Myoglobin, Troponin I, CK-MB Tandem Test
Clinically proven in the rule-in, rule-out of ACS, enabling health care providers to easily and accurately diagnose chest pain patients at the bedside.

Myoglobin is a sensitive early marker often elevating within 2 hrs.
Troponin I is proven specific to myocardium reaching the upper limit of normal in4-6 hours and remaining elevated for up to 7-10 days.
CK-MB reaches the upper limit of normal in 3-6 hours.

A fast, easy and convenient diagnostic tool
This test will benefit emergency departments, critical care units, point of care and other healthcare settings.

Features
Sample material - heparinized whole blood, plasma or serum
Results in 15 minutes or less
Requires no instrumentation
Room temperature stable
Simple to use...just add whole blood
Internal controls on every test
Results are simple to interpret - any presence of a band is indicative of a positive result
 

The alcoholmeter is fully automatic making it very simple to use. The fuel cell sensor is specific to alcohol making the readings unaffected by other possible breath contaminants.

The alcoholmeter is ready to use within 15 seconds of being switched on, results are displayed within 5 - 30 seconds and are then available on a large illuminated display.

Features
Fuel cell sensor - high specifity to alcohol unaffected by other possible breath contaminants
4 indicator lights inform and instruct the operator
Simple to use - fully automatic
Fast, accurate analysis - using the fuel cell sensor
Large illuminated easy to read display
Last test recall
Automatic data collection - all readings stored in memory can be downloaded onto a PC or printer
True evidential capability - used for fast screening but with highly accurate results
Shock and vibration resistant
Calibration security by means of the ‘dongle’ electronic key
Ready to use within 15 seconds at any temperature
Results displayed within 30 seconds
Recovery time is typically 10 - 60 seconds

Specification

Measuring range 0.02 - 2.00 mg/litre
Operating temperature
-5 to +40 °C

Recalibration
Every 6 months

Memory capacity
500 tests as standard

Power supply
5 x AA batteries

Battery life
At least 3,000 breath tests

Weight
525g (including batteries and leather pouch)

Dimensions
169h x 80w x 39d mm
 

This alcoholmeter is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Hb 201+ Haemoglobin system provides an opportunity for quick, simple and reliable quantitative Haemoglobin results with the same performance as a large haematology analyser.

The dual wavelength photometers correct for lipemia, leucocytosis and other sources of turbidity. Any blood source (capillary, venous or arterial) can be used. The unbreakable, disposable cuvette collects the exact amount of blood and mixes the sample with the reagents automatically. The cuvette is placed into the portable analyser. Results appear on the display screen in less than a minute.

Features
Produce accurate results in less than a minute
Utilise only 10µL of capillary, venous or arterial blood
Precalibrated, portable and requires a minimum of maintenance
No calibration or instrument manipulation needed
Automatically compensate for turbidity due to lipids or leucocytosis
Can be used by non-laboratory personnel after a brief training session (can be provided by Woodley's Biomedical Scientists)

Specifications
Measurement range
0 - 25.6 g/dL (0 - 25 g/L or 0 - 15.9 mmol/L)

Accuracy
Correlation of 0.99 when compared to the reference method (ICSH method)

Results
The analyser displays the results within 60 seconds

Sample volume
10 µL

Sample material Capillary, venous or arterial blood

Calibration
The analyser is calibrated at the factory against the ICSH reference method

Power
AC adaptor or internal batteries

Storage temperature
Analyser - 0°C - 50°C, Microcuvettes 15°C - 30°C
Weight
350g

Dimensions 160h x 85w x 43d mm
 

This HB201+ Haemoglobin System is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The combination of features in the Accu-Chek® Aviva meter makes testing fast and easy, and the system’s technology allows you to test right the first time.

The Accu-Chek® Aviva system includes:

Fast, convenient testing
Reminders and averaging to help you manage testing
500-result memory capacity
Rubber grips for easy use

Features
User-friendly design. Small and slender, with easy-to-hold rubber grips, the Accu-Chek® Aviva meter offers a comfortable, discreet choice for blood glucose testing.
Small sample volume. Quick fill, reliable Accu-Chek® Aviva test strips.
Test reminders. The user can set up to 4 automatic reminders for different times throughout the day, to help remember when to test.
Battery backup. An additional small battery in the meter keeps the time and memory for up to 72 hours when the main battery is removed or out of power.
Preset time and date. The meter now comes with the time and date preset, so startup time is faster for the user, as well as the healthcare professional helping with initial setup.

Specification
Display
LCD

Automatic power
Auto power on with strip insertion

Auto off 90 seconds after test if strip is not removed
Auto off 5 seconds after strip removed

Auto off in 2 minutes if meter not used

Sample size
0.6 µL

Power supply
one 3-volt lithium battery (type CR2032)

Battery life
Approx. 1,000 readings (1 year with 3 tests per day)
Measurement time
Approx. 5 seconds

Operating temperature
6°C - 44°C
Storage conditions
-25°C - +70°C
Operating humidity
10 - 90% RH

Memory
500 results and 20 control tests with date and time

Test averages 7, 14, 30 day

Weight
60g with battery

Dimensions 94h x 53w x 22d mm
 

This Accu-Chek® Aviva glucometer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Plasma/Low Hb –Photometer for determination of low haemoglobin levels in plasma, serum, or aqueous solutions. There are many occasions when it is necessary to measure low concentrations of haemoglobin in different media. Until now, time-consuming and complicated methods have had to be used or otherwise reliance has had to be made on imprecise visual judgement. The Plasma/Low Hb Photometer is a quick and simple system, that accurately measures low haemoglobin concentrations in the range of 0—3.00 g/dL (0—30.0 g/L, 0—1.90 mmol/L).

Features
Produces accurate results in less than a minute
Sample volume only 20µL
Precalibrated, portable photometer that requires a minimum of maintenance
No calibration or instrument manipulation needed
Automatically compensates for a certain degree of turbidity due to lipids or leucocytosis
Can be used by non-laboratory personnel after a brief training session (can be provided by Woodley's Biomedical Scientists)

Specifications
Instrument reading
0 - 30 g/L

Linearity
0.3 - 30 g/L
Results Displayed within 60 seconds

Sample volume
20 µL

Sample material
Plasma, serum or aqueous solutions

Calibration
Factory calibrated against ICSH reference method
Power
AC adaptor or internal batteries

Storage temperature
Photometer - 0°C - 50°C, microcuvette - 15°C - 30°C
Weight
1.2 kg

Dimensions
210h x 160w x 90d mm
 

This Plasma/Low Hb Photometer is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The 8400 capnograph can be used in a wide range of settings from spot-checking, verifying and reading intubations to anaesthetised outpatient surgery. It is small, light and easy to use.

The 8400 capnograph is a full-featured monitor providing pulse oximetry, ETCO2, inspired CO2, respiration rate SpO2, and heart rate measurements.

There is a full range of sample lines, airway adaptors and nasal/oral cannulas available for both adult and infant use.

Features
Provides ETCO2, Inspired CO2, respiration rate, SpO2, heart rate and pulse tone
Displayed in numerical and graphical (waveform), signal strength indicator and graphical trends
LCD display
Sidestream technology
Low maintenance moisture removal system
Quick and easy calibration - calibration kit included
Automatic compensation of pressure and temperature so no warm-up period delay
Full range of alarms
6 hour Lithium-Ion battery and battery charger kit
Optional external printer - trend memory or real-time data output
Adult SpO2 finger sensor

Specification
Measurement range
0 - 10% CO2 STPD

Respiration rate range
0 - 150 breaths/min

SpO2 range
0 - 100% SpO2

Peripheral pulse rate range
30 - 254 bpm

Pulse strength
8 segment bargraph

Alarms
User selectable, adjustable volume and silence
Serial output
Infrared port, data format

Power
AC charger input 110V/230V, 50/60 Hz
Battery
Li+, 7.4VDC replaceable, rechargeable

Operating temperature
0 to 48°C
Operating humidity
15 - 95% RH

Weight
680g
Dimensions
127h x 111w x 73d mm
 

This 8400 capnograph is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The digital peak flow meter forms a new generation of measuring peak flow and FEV1. The ergonomic, compact design makes it comfortable to hold and easy to store, while the one button operation makes it simple to use.

The zoning function is easily customised allowing for easy asthma management in both asthma and COPD patients. The memory has a capacity to store up to 200 of each measurement.It is fully waterproof and is supplied with a peak flow meter chart.

Features
Easy to use, hold, store and clean
Designed to monitor asthma
Screening device for COPD patients
Multi-patient use using one way inspiratory mouthpiece that reduces cross contamination and the risk of infection
Measures both Peak Expiratory Flow (PEF) and Forced Expiratory Volume (FEV1)
Lightweight, portable and one button operation makes it easy to use
Memory can hold up to 240 PEF and 240 FEV1 measurements
Waterproof tight seal makes the device easy to sterilise
The zoning system is easy to understand, the red, amber and green zones can be preset with the users predicted values to help the user monitor their condition accurately.
 

Specification
Measurement range PEF-60 - 850 l/min, FEV1 0.60 - 800 litres
Accuracy
PEF ± 6% or 10 l/min, FEV1 ± 3.5% or 0.10 litres

Resolution
PEF 5.0 l/min, FEV1 0.05 litres

Max. resistance to flow
< 2.5cm H20/l/s below 14 L/s (0.25 Kpa @ 840 l/min)

Zoning thresholds
Green/yellow 80%, yellow/red 50%

Memory
240 PEF, 240 FEV1

Power
One coin cell battery

Battery life 2 years (based on 2 tests per day / 3 measurements per test)

Weight
54g

Dimensions
114h x 44w x 29d mm
 

These digital peak flow meters are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Mini Wright standard peak flow meter is recognised as the “Gold Standard” in asthma management. It is suitable for home use or clinic use and delivers exceptional and consistent accuracy.

They have built in one-way disposable mouthpieces so an individual is prevented from inhaling during readings, reducing the risk of contamination.

The scale ranges from 60 - 800 l/min.

Features
Suitable for home and clinic use
Ideal for most adults and children
Accurate, reliable and durable
Hand calibrated for absolute accuracy
Easy to read scale with 3 colours
Simple to clean
Lightweight and portable
Supplied with patient self monitoring chart
Wide range of consumables available

one way valve mouthpieces
two way mouthpieces
sterilisable mouthpieces

Specification
Range 60 - 800 I/min
Scale increment 10 l/min
Accuracy < ± 10% or 10 l/min
Repeatability <5 l/min

Calibration 100% individual
Weight
25g

Dimensions 240h x 60w x 100d mm
 

These mini wright peak flow meters are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The MicroLoop spirometer is highly portable and beautifully designed, the new generation MicroLoop has been developed for the professional. Employing a precision GOLD STANDARD Digital Volume Transducer, it is especially suited to measuring low flow rates in patients with COPD and asthma.

It has a high-resolution colour touch-screen where features can be easily accessed. The MicroLoop has a desk-top docking station which makes battery charging, connection to a PC, the uploading of data and the printing of results to external printer quick and simple.

 Features

Fully compliant to ATS/ERS 2005 Standard (12)

High definition colour touch-screen
Fast on-screen textual entry enabling comments and report writing
Fully customisable printout format
Desktop docking station for battery charging and PC/Printer connection
Direct connection to external Hewlett Packard printers
Unique contextual Help Screens (language selectable) with dedicated Help Button
41 inspiratory and expiratory indicies measureable
On-screen graphical child incentive device
Large 2000+ patient test memory
Optional Spida 5 or SpidaXpert PC software
Internationally recognised on-screen test quality assurance prompts (e.g. slow start, abrupt end etc) ensuring quality test results
Unique 'today's testing feature' - creating a list of patients tested or to be tested
Numerous predicted values and languages selectable
'Lung Age' assessment and textual result interpretation by ATS (9), BTS-NICE (10) or Enright (11)
Body Mass Index and Dyspnoea Score
Bronchodilator and/or Steroid assessment
Complete with all accessories in a sturdy carry case

Specification
Measurements Forced - VC, FEV.75, FEV1, FEV3, FEV6, FVC, PEF, FEV.75/VC, FEV.75/FVC, FEV1/VC, FEV1/FVC (FER), FEV3/VC, FEV3/FVC, FEV.75/FEV6, FEV1/FEV6, FEF25 (MEF75), FEF50 (MEF50), FEF75 (MEF25), FEF25-75 (MMEF), FEF50/VC, FEF50/FVC, MMEF/FVC (FEF25-75/FVC), FIV1, FIVC, PIF, FIV1/FIVC (FIR), FIF25 (MIF75), FIF50 (MIF50), FIF75 (MIF25), R50 (FEF50/FIF50), MET25-75, FET, MVV (ind)

Relaxed - EVC, IVC, IC, VT (TV), Ti, Te, Ti/Ttot, VT/Ti (TV/Ti), IRV, ERV, FR.

Test per subject 5 relaxed VC manoeuveres and 8 forced manoeuveres for each baseline and two post examinations
Predicted values Various - depends upon national preference (including NHANESIII)
Transducer Gold Standard Bi-Directional Digital Volume
Resolution 10ml volume 0.025l/s flow
Accuracy ± 3% (to ATS recommendations)
Storage 2,000+ patients with tests including Flow/Volume loops and Volume/Time curves
Power supplier Input: 100-240V AC 50-60Hz Output: 5V 2.0A
Battery pack Rechargeable Lithium Polymer 3.7V 1600AH
Dimensions 123h x 81w x 23d mm Transducer 60h x 90w x 50d mm
Weight Excluding and transducers: MicroLoop unit 191g, Docking Station 124g
Temperature 0 to +40°C
Operating humidity 30% to 90% non-condensing
Storage temperature -20°C to +70°C
Storage humidity 10% to 90% RH
 

This MicroLoop Spirometer is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This MicroLab ML3500 M8 spirometer is the new generation of spirometer and is the most advanced yet. It is highly portable and beautifully designed.

It features a high-resolution colour touch screen for fast data entry, and a fast integrated printer with an easy load paper mechanism. The printout can be fully customised and direct connection to HP printers is available.

With a large 2,000 patient test memory, high reliability and accuracy, this spirometer is suited for use in a variety of situations.

Features
High definition colour touch-screen
Simple screen icon interface using stylus or optional MicroMouse
Fast on-screen textual entry enabling comments and report writing
Fast, quiet printer with easy load paper mechanism
Fully customisable printout format
Direct connection to external Hewlett Packard printers
Unique contextual Help Screens (language selectable) with dedicated Help Button
41 inspiratory and expiratory indicies measureable
On-screen graphical child incentive device
Large 2000 patient test memory
Optional Spida 5 or SpidaXpert PC software
Internationally recognised on-screen test quality assurance prompts (e.g. slow start, abrupt end etc) ensuring quality test results
Unique 'today's testing feature' - creating a list of patients tested or to be tested
Numerous predicted values and languages selectable
'Lung Age' assessment and textual result interpretation by ATS (9), BTS-NICE (10) or Enright (11)
Body Mass Index and Dyspnoea Score
Bronchodilator and/or Steroid assessment
Complete with all accessories in a sturdy carry case

Specification
Measurements Forced - VC, FEV.75, FEV1, FEV3, FEV6, FVC, PEF, FEV.75/VC, FEV.75/FVC, FEV1/VC, FEV1/FVC (FER), FEV3/VC, FEV3/FVC, FEV.75/FEV6, FEV1/FEV6, FEF25 (MEF75), FEF50 (MEF50), FEF75 (MEF25), FEF25-75 (MMEF), FEF50/VC, FEF50/FVC, MMEF/FVC (FEF25-75/FVC), FIV1, FIVC, PIF, FIV1/FIVC (FIR), FIF25 (MIF75), FIF50 (MIF50), FIF75 (MIF25), R50 (FEF50/FIF50), MET25-75, FET, MVV (ind)

Relaxed - EVC, IVC, IC, VT (TV), Ti, Te, Ti/Ttot, VT/Ti (TV/Ti), IRV, ERV, FR.

Test per subject 5 relaxed VC manoeuveres and 8 forced manoeuveres for each baseline and two post examinations
Predicted values Various - depends upon national preference (including NHANESIII)
Transducer Gold Standard Bi-Directional Digital Volume
Resolution 10ml volume 0.03l/s flow
Accuracy ± 3% (to ATS recommendations)
Storage 2,000 patients with tests including Flow/Volume loops and Volume/Time curves
Printer output The following printers have been tested with the MicroLab from HP's current product range: HP Deskjet 6840, HP Deskjet 5150, HP Deskjet 5151, HP Business Inkjet 1000, HP Officejet Pro K550

Internal Printer - 13mm/s (avg)

Display High-resolution colour touch screen
Power Supply Input: 100-240V AC 50-60Hz Output: 12V 2.5A
Battery Pack Rechargeable NiMH 8.4V 1Ah
Dimensions 120h x 255w x 35d mm. Transducer 60h x 90w x 50d mm
Weight Excluding any transducers: 630g
Temperature 0 to +40 C
Operating humidity 30% to 90% non-condensing
Storage temperature -20°C to +70°C
Storage humidity 10% to 90% RH

This MicroLab Spirometer is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The SpiroUSB is an advanced spirometer designed for the professional that plugs directly into your PC and measures in 3 easy steps - plug, click and blow.

The software is structured around Spida 5 with its user-friendly modern multi-window visual interface - included.

With a laptop or notebook PC the SpiroUSB becomes highly portable too. The software can be easily linked to other patient journal or GP administration systems.

Features
Modern USB interface - plug and use device
Spida 5 software included
Up to 41 spirometry indicies measured
No batteries required
Optional SpidaXpert interpretation and diagnostic module
On-screen animated child incentive display
Configurable printer output
Full test quality control messages with on-line tutoring and ATS quality checks
Textual interpretation
Optional transducer stand
Real-time Flow/Volume and Volume/Time traces
Open and closed Flow/Volume loop test technique is possible
Overlaying of previous test curves for comparison
Long term trending facility
Lung age calculation and textual interpretation

Specification
Measurements
Forced - VC, FEV.75, FEV1, FEV3, FEV6, FVC, PEF, FEV.75/VC, FEV.75/FVC, FEV1/VC, FEV1/FVC (FER), FEV3/VC, FEV3/FVC, FEV.75/FEV6, FEV1/FEV6, FEF25 (MEF75), FEF50 (MEF50), FEF75 (MEF25), FEF25-75 (MMEF), FEF50/VC, FEF50/FVC, MMEF/FVC (FEF25-75/FVC), FIV1, FIVC, PIF, FIV1/FIVC (FIR), FIF25 (MIF75), FIF50 (MIF50), FIF75 (MIF25), R50 (FEF50/FIF50), MET25-75, FET, MVV (ind)

Relaxed - EVC, IVC, IC, VT (TV), Ti, Te, Ti/Ttot, VT/Ti (TV/Ti), IRV, ERV, FR.

Transducer Gold Standard Bi-Directional Digital Volume
Resolution 10ml volume 0.03l/s flow
Accuracy ± 3% (to ATS recommendations)
Dimensions Transducer 60h x 90w x 50d mm
Weight 130g

This SpiroUSB is available for rental/hire for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This MicroLab Spirometer is developed specifically for the professional; it employs a precision Gold Standard Digital Volume Transducer which is especially suited to measuring very low flow rates in patients with COPD.The unit is highly portable and lightweight, and is ideal for use in a wide variety of situations.
With an in-built printer and high resolution LCD display it is the ideal, cost-effective solution to your spirometry requirements.

Features

High definition screen can display both Volume/Time and complete Flow/Volume Loops (using either the open or closed loop test techniques)
Measures up to 36 spirometry parameters
Storage: 1000 patient tests
Integrated high resolution printer
Text entry, enabling comment writing
Internationally recognised on-screen test quality assurance prompts
Predicted value and language selection
Fully customisable printout format
Lung age assessment and textual result interpretation
A comprehensive range of advanced features normally only seen on more expensive laboratory based equipment are included
An ergonomically designed unit of distinctive appearance, this spirometer is portable and lightweight
Rechargeable internal batteries

Specification
Measurements VC, FEV0.75, FEV1, FEV3, FEV6, FVC, PEF FEV0.75/VC, FEV0.75/FVC, FEV1/VC, FEV1/FVC, FEV3/VC, FEV3/FVC, FEV0.75/FEV6, FEV1/FEV6, MEF75, MEF50, MEF25, MEF25-75, FEF50/VC, FEF50FVC, MVVind, FET, MET, IC, FIV1, FIVC, PIF, FIV1,/FIVC, FIF25, FIF50, FIF75, FIF50/MEF50,VT, ERV, IRV [all expiratory measurements with baseline, post bronchodilator 1 and 2, % predicted, % change and normal range]
Test per subject VC-unlimited (best reported) FVC-unlimited (best 3 from baseline, post 1
and post 2 tests)
Predicted values Various - depends upon national preference
Transducer Gold Standard Bi-Directional Digital Volume
Resolution 10ml volume 0.03l/s flow
Accuracy ± 3% (to ATS recommendations)
Storage 1000 patients' tests including Flow/Volume loops and Volume/Time curves
Printer output 320 dot internal thermal printer, or serial output for all IBM Proprinter compatible Canon bubble jet printers e.g. BJC250, BJC4400, BJC80 and BJC50, and all PLC3 compatible Hewlett Packard printers e.g. Deskjet 420, 695, 340, 880C and 895Cxi
Display High resolution graphic LCD 240 x 160 pixels
Power supplier 100 - 240V 0.3A 47 - 63Hz. DC output 9V 0.8A
Battery pack Rechargeable NiCad 7.2V 600mA/hours
Dimensions 150h x 251w x 40d mm. Transducer 50 x 60 x 90mm
Weight Unit weight 0.75kg. Packed weight 2.55kg
Temperature 0 to +40 C
Operating humidity 30% to 90% RH
Storage temperature 0 to +70 C
Storage humidity 10% to 90% RH

This MicroLab spirometer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

These peak flow meters are designed specifically to accommodate new standards in performance and quality; they incorporate many subtle yet unique features making them easy to use and read.

The peak flow meters have dynamic characteristics which make them easier to read; it features an optional zoning system which prevents the zones being accidentally moved or tampered with.

Features
Designed specifically to meet EN13826 scale standard
Movable asthma management colour zones that won’t wash off
Large, high visibility scale
In-built internal check valve, avoiding cross infection concerns
Meets and exceeds all international performance standards
Unlike other PFM’s the advanced design means dismantling is avoided
Supplied with a 4-week recording chart
 

Specification
Range 60 - 900 I/min
Scale increment 10 I/min
Accuracy < ± 5% or 10 I/min
Repeatability < ± 2%
Calibration 100% individual
Frequency response c100 Hz @ 350 I/min
Dynamic state Critically damped @ 350 I/min
Standard compliance ERS statement 1997 (Eur Respir J 1997:9 Suppl.24) AS/NZS 4237:1994 NAEP Guidelines 1991
Integral check valve
Expiration only

These peak flow meters are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Escort iLog external data logger provides you with the ability to introduce total quality control for temperature sensitive products while supporting your compliance with the stringent monitoring requirements of today’s pharmaceutical market.

With the extended functionality of its display the iLog supplies instant information regarding highest, lowest, average time out of specification and current readings for each sensor as well as the loggers battery status.

Features
Large LCD display with multi-function viewing
Bookmark readings via a simple magnet swipe
0.1°C resolution provides an informative advantage
External sensor has a temperature range of 1040° C to +40° C
Customisable alarm settings and programmable start function
User-friendly multi-language software for easy programming and download
Time and date settings: real time clock, accuracy better than 1 minute per month at ambient; multiple time zones supported
Password protected security (using Escort Console Software)
CE marked
EN 12830 compliant
 

Specification
Temperature Range Internal: -4° C to +70° C

External: -100° C to +40° C

Sensors Internal and external (sensor length 1 cm)
Internal Sensor Accuracy from -40°C to 0°C (± 0.35°C)

from 0°C to +70°C (± 0.25°C)

External Sensor Accuracy from -100°C to -80°C (± 1.0°C)

from -80°C to -50°C (± 0.5°C)

from -50°C to +40°C (± 0.3°C)

Resolution 0.1°C
Sensor Response Time Internal - T90 of 20 minutes in moving air

External - T90 of 5 minutes in moving air

Memory 32,000 samples (16,000 per sensor)
Sampling Frequency 1 second to 10 days
Power Source User replaceable 3.6V 1/2 AA lithium battery
Typical Battery Life 1 to 2 years
Weight 68g including batteries
Dimensions 76mm diameter x 18mm height

Temperature calibration can be provided to ISO 9002 standards upon request at time or ordering.

This Escort iLog External Data Logger is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Escort iLog internal data logger provides you with the ability to introduce total quality control for temperature sensitive products while supporting your compliance with the stringent monitoring requirements of today’s pharmaceutical market.

With the extended functionality of its display the iLog supplies instant information regarding highest, lowest, average time out of specification and current readings for each sensor as well as the loggers battery status.

Features
Large LCD display with multi-function viewing
Bookmark readings via a simple magnet swipe
0.1°C resolution provides an informative advantage
Provides maximum data logging reliability and accuracy
Customisable alarm settings and programmable start function
User-friendly multi-language software for easy programming and download
Time and date settings: real time clock, accuracy better than 1 minute per month at ambient; multiple time zones supported
Password protected security (using Escort Console Software)
CE marked
EN 12830 compliant
 

Specification
Temperature Range -40° C to +70° C
Sensors Internal only
Accuracy from -40°C to 0°C ± 0.35°C

from 0°C to +70°C ± 0.25°C

Resolution 0.1°C
Sensor Response Time T90 of 20 minutes in moving air
Memory 32,000 samples
Sampling Frequency 1 second to 10 days
Power Source User replaceable 3.6V 1/2 AA lithium battery
Typical Battery Life 1 to 2 years
Weight 68g including batteries
Dimensions 76mm diameter x 18mm height

Temperature calibration can be provided to ISO 9002 standards upon request at time or ordering.

This Escort iLog Internal Data Logger is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The Escort Intelligent MINI data loggers are ideal for use when transporting samples, and offer a low cost alternative for solving your temperature monitoring problems. These loggers have internal or external sensor options, a large LCD display and a two Kilobyte memory which is capable of storing 1868 samples.

They record in real time and can be programmed to start on demand by a simple button press or with a start delay of 0 to 255 minutes. The Escort Intelligent MINI's electronics are housed within a robust ABS plastic case which fits discreetly into any package or consignment.

Features
Large LCD display with multi function viewing
Available with either internal or external sensor options
Customisable alarm settings and programmable start function
Downloadable via a USB to Serial Port cable, no interface required
Provide maximum data logging reliability and accuracy at a low cost
User-friendly multi-language software for easy programming and download
CE marked
 

Specification
Temperature Range -40° C to +65° C
Sensors Internal or external options
Accuracy ± 0.5°C

Resolution 0.1°C
Sensor Response Time Internal sensor T90 of 20 minutes in moving air (external sensor: 5 minutes)
Memory 1,868 samples
Sampling Frequency 1 to 225 minutes
Power Source User replaceable 3.6V 550 mAH lithium coin battery
Typical Battery Life 1 to 2 years
Weight 70g including batteries
Dimensions 83h x 57w x 20d mm

Temperature calibration can be provided to ISO 9002 standards upon request at time or ordering.

This Escort Intelligent MINI Data Logger is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

It is now more important than ever to ensure the correct temperature of medical refrigeration equipment. This minimum/maximum thermometer attaches to the exterior of the unit and measures the internal temperature via a probe.

The triple display simultaneously shows the high, low and current temperature. Alarm feature alerts if temperature rises above or falls below a set point. Velcro and magnetic strips are provided for mounting.

Supplied with an individual calibration certificate.

Features
Digital display making it easy to read
Simple and small design
Easy to use
Displays minimum, maximum and current temperature
Ideal for a variety of temperature monitoring situations
Supplied with a calibration certificate for when legislation requires one
Features an alarm if temperature rises or falls below a set point
Alarm programmable in 1°C increments
3mm micro cable permits doors to close on it
Solid state probe eliminates mercury contamination
Probe is sealed in a miniature bottle filled with patented non-toxic glycol
Supplied with magnetic strips for mounting
 

Specification
Range -50 to +70°C
Resolution 1°C
Accuracy ± 1°C
Alarm Yes
Weight 113g
Dimensions 152 x 108 x 19mm

This min/max thermometer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The AS300SA is a new generation of monitoring and alarm system which allows you to make an informed decision on what action to take based on instant readings from the equipment, sent at any time to your mobile phone.

Particularly useful if an alarm occurs when the person is on call or out of the workplace, at night or weekend.

AS300SA probes can be monitoring equipment within a single country or several - simply text a code and the equipments status will be returned immediately.

Features
Set up and change all settings from a mobile phone
Password protected
Simple installation
Available over multiple sites - related sites can be monitored internationally using a GSM network
Applications include: freezers, refrigerators, storage units, incubators, isolators, clean rooms, culture rooms, cryogenics and many more

Specifications
Configurable Inputs I/P1 Precision Temp +/- 0.1°C (-200°C to +100°C)
I/P2 Precision Temp +/- 0.1°C (-200°C to +100°C)
I/P3 Volt Free
Outputs Replay
Configurable Alarms I/P1, I/P2, I/P3, I/P RS232, Power Fail
Memory Over 4000 readings
Telephone Numbers 5 telephone numbers
Passwords Master and Acknowledger 4 digit
Display Display of Sim Number, Values of I/P1, I/P2, Sim Value and Signal Strength
GSM Signal Visual indication of signal strength. Audible and visual indicators
Sim Card Low Credit warning test message. Audible and visual warnings
Battery Back Up Rechargeable batteries
Dimensions 170h x 80w x 35d mm
Telephone Alarm Messages Up to 5 numbers can be sent text messages

Functions Initiated From a Mobile Phone
Enable or disable GSM unit
Setup alarm parameters e.g. High alarm, low alarm and delay time for each input (0-90min)
Setup telephone numbers, mobile and land lines
Enquire details including alarm status, signal strength, setup values, amount of credit and input readings
Acknowledge alarms
Test alarm function
Disable / defrost alarm facility for I/P1 and I/P2 to accept alarms (0-90 hours)
Calibration function
Output function
 

This remote monitoring system is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This jumbo digital vaccine thermometer is ideal for use in the clinical trials industry, comes with a triple display and is waterproof.

This thermometer has large digits to aid readability and has several mounting options.

There are 3 different probe types available - please see below for further details.

Features
Triple display: maximum, minimum, current probe temperatures plus room temperature
38mm high digits on display
Sensor and 3m cable perform even when under water
Alarm alert when temperature rises or falls below a set point, programmable in 1°C increments
High-impact, chemical resistant ABS plastic case
Flip-open stand for lab bench, slot for wall mounting, and Velcro™ and magnetic strips to attach to any surface
Min/max monitors high/low readings
Supplied with AAA bettery and Traceable® Certificate ISO 17025 A2LA to NIST
 

3 different probe types available
Probe sealed in minature bottle (25 x 64mm) filled with patented nontoxic glycol, bottle insulates sensor from rapid temperature changes when refrigerator door is opened
Naked sensor probe measure 4.8mm in diameter, 19mm long
5mL vaccine bottle mimics vaccine temperature, and fits in vaccine tray
 

Specification
Range -50°C to +70°C
Resolution 0.1°C
Accuracy ± 1°C
Weight 113g
Dimensions 111h x 22w x 8d mm

 This jumbo digital vaccine thermometer is available for purchase for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.
 

This -100°C digital thermometer has a wide temperature range with Traceable® Platinum Freezer technology. With a temperature range of -99.9C to +199.9°C this digital thermometer can be used in a wide range of situations.

It monitors temperatures in freezers, water baths, heating blocks, incubators and refrigerators.

Features
RTD platinum probe
3m ultra-thin micro-cable permits freezer doors to open and close on it without affected the seal
Fast response 100-Ω platinum probe is triple purpose for use with liquids, air/gas and frozen material
High-impact, chemical resistant ABS case
Adjustable probe holder, Velcro™, and magnetic strips are provided for mounting of both thermometer and probe
Supplied with probe, 9V battery, carry case and Traceable® Certificate ISO 17025 A2LA to NIST
 

Specification
Range -99.9 to +199.9°C
Resolution 0.1°C
Accuracy ± 2°C
RTD platinum probe
3.2 x 127mm

Weight 120g
Dimensions 108h x 70w x 19d mm

This -100°C digital thermometer is available for purchase for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This digital thermometer will attach to the exterior of the unit and provide a constant reading of the temperature inside via the use of a probe. Ideal for use with a fridge or freezer.

 This digital thermometer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

It is now more important than ever to ensure the correct temperature of medical refrigeration equipment. This minimum/maximum thermometer attaches to the exterior of the unit and measures the internal temperature via a probe.

The triple display simultaneously shows the high, low and current temperature. Alarm feature alerts if temperature rises above or falls below a set point. Velcro and magnetic strips are provided for mounting.

Features
Digital display making it easy to read
Simple and small design
Easy to use
Displays minimum, maximum and current temperature
Ideal for a variety of temperature monitoring situations
Features an alarm if temperature rises or falls below a set point
Alarm programmable in 1°C increments
3mm micro cable permits doors to close on it
Solid state probe eliminates mercury contamination
Probe is sealed in a miniature bottle filled with patented non-toxic glycol
Supplied with magnetic strips for mounting
 

Specification
Range -50 to +70°C
Resolution 1°C
Accuracy ± 1°C
Alarm Yes
Weight 113g
Dimensions 152 x 108 x 19mm

This min/max thermometer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

The datalogger is a very low cost, single channel datalogger for temperature ranges from -40°C to 40°C or 0°C to 80°C, selectable via a user changeable link.

In addition to a green LED indicating the unit’s ‘active’ status the datalogger also features programmable alarm limits. If an alarm condition occurs the integral red LED will flash indicating to the observer that the data logger has experienced temperature conditions outside the pre-set parameters.

Features
Compact size and simple to use
Selectable temperature range: -40 to +40°C or 0 to +80°C
Programmable limit alarms with integral LED indicator
Up to 2,000 readings
Readings can be downloaded to a computer through a cable interface (RS-232)
12 month battery life
Water resistant
Robust construction
External sensor option
 

Specification
Measurement range
-40 to +80°C

Sample rate
60 sec to 24 hrs

Alarm LEDs
4 sec red flash when alarm exceeded

Logging
8 sec green flash when active

Memory full 16 sec green flash when full

After download
Sleep

Accuracy
± 0.5°C

Resolution
< 0.1°C
IP rating
IP54 and IP67 available

Battery type Lithium

Battery life
> 1 year (replaceable)

Data recovery
Via plug and interface cable to PC

Recorder start up
Programmed time/date

Weight
20g

Dimensions
42h x 27w x 13d mm

This datalogger is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Temperature calibration can be provided to ISO 9002 standards upon request at time of order.

This LP10 cardiac monitor is a portable lightweight single trace monitor designed for simple ECG and heart rate monitoring. It is powered directly from the mains supply or by an optional rechargeable battery pack.

The ECG features include a high resolution waveform display, and very stable, accurate heart rate in the presence of many types of artifact or VES episodes. This is made possible due to sophisticated software algorithms. On screen pacemaker, lead off indication and alarm limits are also provided.

Features
Pacemaker and lead off indication status
ECG pickup obtained via conventional electrodes and a standard 3 way patient cable
Compact size and simple to use
Provides 24 hour monitoring
High resolution waveform ECG display
Stable and accurate heart rate
Defibrillator synchronisation
Various alarms
Visual and audible, volume control for QRS
Optional 2 minute suspend
Lead fault
Asystole
Bradycardia
Tachycadia
Patient input
Simple user interface (membrane keypad)
Robust case design
Integral carry handle
 

Specification
Display Heart rate, QRS indication, low and high heart rate alarms, lead selection and trace size

ECG
Lead selector - Lead I, II, III (optional I, II, III, aVR, aVF, V)
Calibration
1mV ± 5% push button

Pacer
Displays pacer as 2cm negative spike
Protection
500 joule defibrillation & diathermy

Heart rate range 15 - 250 bpm

Output
Standard ECG, defibrillator synchronisation QRS
AC supply 220/240 V

Battery
Optional rechargeable battery pack

Display
80 x 100mm, single channel ECG, manual freeze
Speed
25 mm/sec
Weight
4 kgs

Dimensions
140h x 190w x 265d mm

Meets all relevant BSI and IEC standards - CE

This LP10 cardiac monitor is available for hire/rent for your clinical trial. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This vital signs monitor is ideal for adult, paediatric and neonatal patients. It features a large, coloured high-resolution display for NIBP and plethysmogram waveform.

It features various alarms and indicators, and has a stable design to prevent movement during use. An integrated handle and a range of mount options make it easy to use. It offers measurements for NIBP, SpO2, temperature and pulse rate.

Features
Offering Masimo SET™, Nellcor OxiMax™ or Mindray SpO2
Large coloured LED display for NIBP
3.4" high resolution LCD for plethysmogram waveform and option selection
NIBP: mmHg/ kPa selectable showing Sys, Dia, MAP and Pulse
Patient type display (adult, paediatric, neonatal)
Stable design prevents slippage and tilting
Integrated carry handle and range of mount options
Removable and rechargeable battery with up to 10 hours use between recharges
Powerful data management, store up to 100 patient ID's with 1200 sets of data for each parameter
Built-in thermal printer option for immediate data output
Data transfer capable to Windows PC for review and A4 printing
Supplied with sealed lead acid rechargeable battery (4.5 hour usage), adult NIBP cuff (25-35cm), NIBP extension tubing
 

Specification
NIBP
Operation mode Manual, automatic or continual

Measurement range Adult: 10 - 270mmHg
Paediatric: 10 - 200mmHG

Neonatal: 10 - 13mmHg
Pulse rate range
40 - 254 bpm

SpO2
Choose from Masimo SET™, Nellcor OxiMax™ or Mindray SpO2

Measurement range
0 - 100%

Pulse rate
20 - 254 bpm

SmarTemp® Thermometer

Measurement range
25 to 44°C

Accuracy
± 0.2°C

AC power supply
100-240 VAC, 50/60 Hz, 70 VA

Weight
< 3.5 kg (including battery)

Dimensions
240h x 170w x 170d mm
 

This vital signs monitor is available for hire/rent for your clinical trial or is available on a purchase basis. It can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

It is the Department of Health recommendation that all new scales purchased for the purpose of weighing patients should as a minimum achieve a class III standard.

These scales have been developed with this in mind. They are a low cost alternative scale which comply with the regulations but still achieve on performance.

These compact personal scales with their durability, functionality and size permit medically precise weighing results in even very confined spaces.

Features
Automatic power down function
Lightweight
Mother-child function
4 leveling bases
Slip proof surface

Specifications
Capacity 200 kg
Graduation 200 g
Power supply
Batteries
Approval CE approval class (III)

Weight
3.9 kgs
Dimensions - display 58h x 313w x 315d mm

 These digital flat scales are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

These digital column scales are versatile, low maintenance and site-independent with economic battery operation. They are ideal for daily use in hospitals and doctors practices.

They feature transport castors so they are easy to move around.

They are equipped with several intelligent functions - for example the BMI function permits a reliable evaluation of the nutritional condition of the patient.

Features
Intelligent functions
BMI
HOLD function
TARE function
lbs / kg switch over
automatic / manual switch off
Smooth running transport castors
Low maintenance
Site-independent
Battery operated
Energy-saving and cost-effective
 

Specifications
Capacity 250 kg
Graduation Below 150kg = 100g increments

Above 150kg = 200g increments

Power supply
Batteries/mains adapter optional
Approval
CE approval class (III)

Measuring rod
(optional)

Weight
6.8 kgs

Dimensions
830h x 292w x 390d mm
 

These digital column scales are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This mobile height measure is distinguished by its especially top-quality materials and a cleverly designed assembly system.

The stability of this height measure is unmatched. It is particularly suited for use in doctors’ practices and hospitals.

When disassembled it can be conveniently transported to any location.

Features
Fast and simple assembly
Collapsible measuring rod
Robust base plate guarantees a sturdy stance
Base has no raised sides or edges
Wall spacer to prevent wobbling and trembling
Large and stable head piece for accurate results
Made from wirm non-warping plastic
Two sided scale on the measuring rod
Can be dismantled in just a few easy steps
Adapter element for flat scales (optional)

Specification
Measuring Range 20 - 205 cm / 8 - 81"
Graduations 1mm / 1/8"

Weight
3.6 kgs

Dimensions
2145h x 328w x 574d mm

Also available in the range upon request: electronic height measure, mechanical height measure, telescopic height measure, mobile height measure, portable height measure and measuring tape.
 

These mechanical flat scales provide precision, reliability and incorporate a good design.

They feature a large, clear and well defined dial making it easy to read the measurement.

They have a non-slip platform making it easy for the patient to step on and off.

Features
Dial:

large area
well-defined
Platform:
large area
low level
non-slip
scratch resistant
Weight display immediately after stepping on the scale
Reliable corrosion protection
Galvanised frame, load lever, counterweight and all sheet metal parts

Specifications
Capacity 150 kg
Graduation 1 kg
Approval CE approval (III)

Weight 4 kg

Dimensions 105h x 300w x 406d mm

These mechanical flat scales are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This floor standing examination lamp has a sealed injection moulded luminaire so it is cool to touch giving comfort and safety. There is a dual intensity control so the light output is adjustable, and being set at a 12 degree angle allows and unobstructed field of view.

Features
Long-lasting, 35-watt halogen lamp produces significantly whiter, brighter light than ordinary goose neck units
Dual-intensity control switch allows instant adjustment of light output
Molded Lexan® head minimises conduction of heat, keeps luminaire cool to the touch
Encased, flexible 24" arm enables one-hand positioning—not possible with standard goose neck units
Multiple installation options to fit your needs
Specification
35 Watt halogen lamp
24" arm for one hand positioning

With its cable remote control for hand held, table or wall mounting, these battery-operated flat scales are an extremely flexible, all-purpose pair of scales.

These flat scales have a high capacity and deliver accurate and reliable measurements.

They have various useful features for a wide range of studies and situations.

Features
Energy-saving (up to 16,000 weighings per battery pack)
High capacity of 200 kg
Stylish and sleek design
Limit value function - can be programmed to sound an alarm if a certain weight is exceeded
Useful for stress control in rehabilitation centres
BMI function providing nutritional information

Specifications
Capacity 200 kg
Graduation below 150kg = 50g increments

above 150kg = 100g increments

Power supply
Batteries/mains adapter optional

Approval CE approval class (IIII)

Weight
7.6 kgs

Dimensions - display
85h x 215w x 110d mm

Dimensions - platform
75h x 292w x 300d mm
 

Also available within the range - raised display, integrated display, cabled remote display and mechanical personal scales.

These flat scales are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

This simple but effective mechanical measuring rod is ideal for essential height measurement.

It has a measuring range up to 200 cm and allows highly precise results.

It is particularly suited for use within medical practices.

Features
Cost effective with reduction to the essentials
Wall mountable
Collapsible measuring rod
Telescopic measuring rod
Sturdy anodised aluminium

Specifications
Measuring range
6 -200 cm / 3 - 78"

Graduation
1 mm / 1/8"

Weight
900g

Dimensions
1322h x 55w x 34d mm
 

This mechanical measuring rod are available for hire/rent for your clinical trial or are available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

High quality chrome framed ward screens with four removable vinyl curtained sections. Folds flat when not in use.

Specification
Full length 280 cms
Screen dimensions 180h x 70w cms
Castors 5 cm diameter rolling castors