EnTegra DSP Ltd - Data Acquisition - 2x400MSPS ADC and 2x500MSPS DAC with Virtex6 FPGA

The X6-GSPS is an XMC I/O module featuring two 12-bit, National Semiconductor ADC12D1800 1.8 GSPS A/Ds with a Virtex6 FPGA computing core, DRAM and Flash memory, and eight lane PCI Express host interface.

A Xilinx Virtex6 SX315T FPGA with 4096 MB DDR2 DRAM memory provide a very high performance DSP core for demanding applications such as emerging wireless standards. The close integration of the analogue IO, memory and host interface with the FPGA enables real-time signal processing at extremely high rates exceeding 2000 GMACs per second.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X6-RX is a flexible IF receiver that integrates IF digitising with signal processing on a PMC IO module. The module provides up to 48 configurable receiver channels with a powerful Xilinx Virtex 6 FPGA signal processing core, and high performance PCI Express/PCI host interface. With the X6-RX, IF recorders can log both the digitised raw data and channels real-time sustaining rates over 1 GB/s.

The X6-RX features four, 16-bit 160 MSPS A/Ds with dual digital downconverters (DDC). IF frequencies of up to 300 MHz are supported. The sample clock is from either a low-jitter PLL or external input. Multiple cards can be synchronised for sampling and downconversion.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X5-TX is an XMC I/O module featuring four channels of 500 MSPS, 16-bit DAC outputs with a Virtex5 FPGA computing core, DRAM and SRAM memory, and eight lane PCI Express host interface. The DAC devices also support a mode providing two channels at a true 1 GSPS, 16-bit rate without interpolation.

A Xilinx Virtex5 SX95T or LX155T with 512 MB DDR2 DRAM and 4MB QDR-II memory provides a very high performance DSP core for demanding applications such RADAR and direct RF digitizing. The close integration of the analogue IO, memory and host interface with the FPGA enables real-time signal processing at rates exceeding 300 GMAC/s.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X5-GSPS is an XMC I/O module featuring two 8-bit, National Semiconductor 1.5 GSPS ADC08D1500 A/Ds with a Virtex5 FPGA computing core, DRAM and SRAM memory, and eight lane PCI Express host interface.

A Xilinx Virtex5 SX95T with 512 MB DDR2 DRAM and 4MB QDR-II memory provide a very high performance DSP core for demanding applications such as emerging wireless standards. The close integration of the analogue IO, memory and host interface with the FPGA enables real-time signal processing at extremely high rates exceeding 300 GMACs per second.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X5-COM is an XMC IO module featuring four 4.125 Gbps serial ports directly connected to a Virtex5 FPGA computing core with DRAM and SRAM memory, and PCI Express host interface. With supporting IP, the X5-COM is ideal for computational intensive applications for Ethernet packet processing, encryption and test.

A Xilinx Virtex5 FPGA with 512MB DDR2 DRAM and 4MB QDR-II SRAM memory provides a very high performance computing core. Either the SXT95 or FXT100 Virtex5 FPGA is available. The FPGA has four Ethernet MACs and 2 PowerPCs (FX100T) in the FPGA logic array.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X3-2M is an XMC IO module featuring twelve simultaneously sampling 16-bit, 10 MSPS A/D channels designed for high speed instrumentation and analysis for neuro-physical, high speed motion analysis, and high speed data acquisition applications.

Flexible trigger methods include counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source. Data acquisition control, signal processing, buffering, and system interface functions are implemented in a Xilinx Spartan3A DSP FPGA, 1.8M gate device. Two 512Kx32 memory devices are used for data buffering and FPGA computing memory.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X3-25M is an XMC IO module featuring two 16-bit, 105 MSPS A/D channels and two 16-bit, 50 MSPS DAC channels designed for high speed stimulus-response, ultrasound, and servo control applications.

Flexible trigger methods include counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source. Data acquisition control, signal processing, buffering, and system interface functions are implemented in a Xilinx Spartan 3A DSP, 1.8M gate FPGA device. Two 1Mx16 memory devices are used for data buffering and FPGA computing memory.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.

The X3-Servo module features 12 simultaneously sampling A/D and DACs with an FPGA computing core. Low latency SAR A/D and fast-settling DACs support real-time servo control applications. The programmable input range and high input interface directly to many sensors, while the output is capable of driving many transducers. Front panel digital IO can be also be used as PWM or process controls.

Clock and trigger controls include support for consistent servo loop timing, counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X3-SDF is an XMC IO module featuring 4 simultaneously sampling, sigma delta A/D channels designed for vibration, acoustic and high dynamic range measurements. The A/D device has programmable output rates up to 24 bits @ 2.5 MSPS and 16- bits @ 20 MSPS using the programmable filter in the A/D.

A precision, low-jitter timebase or external clock is used for sample rate generation. Sample rates up to 20 MSPS, with <10 kHz programmable resolution, are supported as well as external clocking. Trigger methods include counted frames, software and external triggering.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.
 

The X3-Timing is an XMC I/O module with precision, low-noise clock generation and distribution. The module has 4 output clocks and four output triggers as well as a clock/reference input and a trigger input. The X3-Timing can also act as a system timing card in PXI systems, providing the reference clock, sample clocks and triggering.

In the sample clock generation mode, the X3-Timing can generate clocks from 1560 kHz to 1 GHz. The clocks are referenced to GPS, an on-card 1 ppm oscillator, or an external input. The PLL circuit is fully programmable, providing extremely low noise clocks with 0.2 ps RMS jitter typically. The output clocks are phase aligned to within 100 ps. Each output clock is a 1 to 80 subdivision of the PLL or external clock.

We have a range of adapters to use this board in a desktop PC, cPCI rack, with a Laptop, in VPX chassis or in an eInstrument.

 

The PMC-PCI carrier card is a single slot PCI card that facilitates the integration of any PMC or PTMC board into standard PCI systems. Designed to host any 32- or 64-bit PMC module, the PMC-PCI carrier card is a passive PMC to-PCI adapter requiring no special bridge software to integrate PMC mezzanine cards into a PCI system. Well-suited for enterprise router/switch/gateway providers and system integrators.

The PCI-X to XMC.3 module adapter allows a single width PCI Express XMC module to be used in a PCI/PCI-X slot. The XMC module is VITA 42.3 compatible and supports x4 PCI Express lanes.

The adapter is completely transparent to PCI-X operations through a PCI-X to PCI Express bridge. The bridge enumerates as a standard PCI device. When used in a PCI-X 133 MHz 64 bit slot, the adapter provides 490 MB/s sustained transfer rates between the XMC module and the host system.

The PCI Express to XMC module adapter allows a single width XMC module to be used in a PCI Express slot. The XMC module is VITA 42.3 compatible and supports eight PCI Express lanes

The P16 connector breakout provides convenient access to all P16 signals through an MDR 68 connector. Signals from P16 are routed as differential pairs to JP1 so that high speed IO standards can be used to the cable.

The adapter is completely transparent to PCI Express. All signals from the PCI Express host bus are connected directly to the XMC module.