Caro Paving Support System

CARO SUPPORT is one of the most economical and simple ways of laying roof or terraced areas. This Polypropylene injection moulding raises the paving 15mm above the supporting surface and its integral spacers ensure a constant 5mm gap between each slab, so all water drains away immediately, leaving an "ever-dry" paved area. 

As the paving is loose laid it's simplicity itself to replace damaged slabs or to inspect for possible waterproofing failure and all drainage outlets, services, manholes, etc., can be covered over to leave a completely unobstructed paved area. 

Performance and Dimensions
Material: Block Co-Polypropylene - age and weather resistant and fully compatible with all roofing materials. 

Height and Base: 15mm
Thickness of Spacers: 5mm
Height of Spacers: 15mm
Diameter: 175mm
Base Area: 22500mm 2
Maximum Loading per Caro Support 1200kgs

Slab Size (mm) = Caro Support per m 2
600 x 600 = 2.8
600 x 300 = 5.6
500 x 500 = 4
500 x 250 = 8
450 x 450 = 5
450 x 225 = 10
400 x 400 = 6.2
300 x 300 = 11.2 

Estimation of quantities
Due to the fact the CARO SUPPORT is easily divisible into halves or quarters, ensuring no wastage, it is possible to allow one unit per paving slab for estimation purposes. 

However as most paved areas are in square metres the information above will give a fair indication of the number of Caro Supports required dependant upon the slab size and area. 

Price is per box of 140