AN Wallis and Co Ltd
The Number One Supplier For All Your Surge Protection, Earthing And Lightning Needs
TOTAL SYSTEM PROTECTION
Lightning Transient Overvoltage Protection for Mains Power
All mains power lines entering or leaving the building are prime routes for lightning and switching induced surges and overvoltages to enter the electrical and electronic systems. Due to the large cross sectional area of these cables high current and voltage surges can enter with minimal attenuation.
By fitting Wallis Surge Protection devices in parallel with the incoming mains, surges and overvoltages can be reduced to an acceptable level. Protection devices are available for single and three phase as well as three phase split busbar systems.
The Number One Supplier For All Your Earthing and Lightning Protection Needs
EARTHING & EQUIPOTENTIAL BONDING | EXTERNAL STRUCTURAL PROTECTION |
|
|
|
|
|
|
|
|
|
|
|
|
|
Filter products and services
-
Earth Rod to Cable 'G' Clamps
These clamps are used for joining earth rods to different sizes of stranded copper conductor. The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.Request a Quote Supplied by AN Wallis and Co Ltd -
Earth Rod to Tape 'A' Clamps
These clamps are used for joining earth rods to different sizes of copper tape. The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.Request a Quote Supplied by AN Wallis and Co Ltd -
Interface Test Clamps
This Wallis clamp is used for connecting flat tape to solid circular conductor, for example where the lightning protection system has been designed in 8mm copper conductor but the connection to the earth rod is made using 25 x 3mm copper tape. It will also serve for making through joints and tee connections in 8mm solid circular conductor.Request a Quote Supplied by AN Wallis and Co Ltd -
Metalwork Bonding Clamps
These clamps are designed for bonding 8mm solid circular conductors onto metal surfaces.Request a Quote Supplied by AN Wallis and Co Ltd -
'MV' Clamps
These Wallis four-way connectors are suitable fpr crossing over, making straight joints and tee connections in solid circular conductor.Request a Quote Supplied by AN Wallis and Co Ltd -
Oblong Junction Clamps
Designed to join a range of tape sizes in a straight through position. In many applications the clamp enables tapes to be overlapped and secured by the two set screws.Request a Quote Supplied by AN Wallis and Co Ltd -
Rebar Clamps
This versatile range of Wallis Re-bar clamps is used to connect re-bar to re-bar or re-bar to stranded cable. They provide a strong mechanical connection along with excellent resistance to corrosion.Request a Quote Supplied by AN Wallis and Co Ltd -
Square Cable Clamps
This Wallis four-way connector is suitable for crossing over flat copper tape and bare stranded copper cable. It will also serve for making straight through joints and tee connections.Request a Quote Supplied by AN Wallis and Co Ltd -
Square Tape Clamps
These Wallis four-way connectors are suitable for making cross, straight through or tee joints in flat tape. The base has a countersunk hole in the middle for securing the clamp to the building surface and the lid is fixed by means of four screws. Fix using countersunk woodscrew 1 1/2" x No. 10 and No. 10 wall plug.Request a Quote Supplied by AN Wallis and Co Ltd -
T' Connector Clamps
This purpose-designed 'T' connector clamp is ideal for connecting the roof network to the down conductors of an 8mm solid circular lightning protection system.Request a Quote Supplied by AN Wallis and Co Ltd