Drayton Tank and Accessories Ltd

25mm (1") Brass Equilibrium Ball Valve with 150mm (6") Copper float, BSP threaded connection, Suitable for upto 5 bar water pressure upto 60 Deg C Water Temperature Assisted Shutoff (reducing hammer) manufactured to BS1212 Overall length of fitting and float from inside connection: 635mm, Optional drop arm attachment for use in ball valve housings and for Type AB Airgaps.

3/4 Inch Brass Equilibrium Ball Valve 22mm (3/4") Brass Equilibrium Ball Valve with 154mm (6") Copper float, BSP threaded connection, Suitable for upto 5 bar water pressure upto 60 Deg C Water Temperature Assisted Shutoff (reducing hammer) manufactured to BS1212 Overall length of fitting and float from inside connection: 560mm, Optional drop arm attachment for use in ball valve housings and for Type AB Airgaps.

A Screened overflow Kit for a potable (drinking) water tank must be at least twice the size of the inlet used on the tank. The overflow fitting is a necessary item for any storage tank, and part of the water Regulations for potable water tanks these Overflows must be screened to prevent igress of insects into the tank, these regulations were more commonly known as BYLAW 30. 150mm (6) CPVC Screened Inline Overflow Fitting (If you require a full kit please order the 22mm Overflow kit with this Overflow) All screens inside these fittings are made from Stainless Steel.

A Screened overflow Kit for a potable (drinking) water tank must be at least twice the size of the inlet used on the tank. The overflow fitting is a necessary item for any storage tank, and part of the water Regulations for potable water tanks these Overflows must be screened to prevent igress of insects into the tank, these regulations were more commonly known as BYLAW 30. 150mm (6") CPVC Screened Overflow Fitting with 22mm (3/4") MDPE Screened Warning Pipe, MDPE Screened Tank Vent, All screens inside these fittings are made from Stainless Steel.

A Screened overflow Kit for a potable (drinking) water tank must be at least twice the size of the inlet used on the tank. The overflow fitting is a necessary item for any storage tank, and part of the water Regulations for potable water tanks these Overflows must be screened to prevent igress of insects into the tank, these regulations were more commonly known as BYLAW 30. 150mm (6") PVC Screened Inline Overflow Fitting (If you require a full kit please order the 22mm Overflow kit with this Overflow) All screens inside these fittings are made from Stainless Steel.

A Screened overflow Kit for a potable (drinking) water tank must be at least twice the size of the inlet used on the tank. The overflow fitting is a necessary item for any storage tank, and part of the water Regulations for potable water tanks these Overflows must be screened to prevent igress of insects into the tank, these regulations were more commonly known as BYLAW 30. 150mm (6") UPVC Screened Overflow Fitting with 22mm (3/4") MDPE Screened Warning Pipe, MDPE Screened Tank Vent, All screens inside these fittings are made from Stainless Steel.

(6") Inline Screened Tank Overflow (150mm NB - 168.3mm OD) The overflow is a necessary item for any storage tank, and must be screened as part of the Water Fittings Regulations 1999 for potable water tanks to prevent igress of insects and debris into the tank, these regulations were more commonly known previously as BYELAW 30,. A Screened overflow for a potable (drinking) water tank should be at least twice the inlet size on the tank. 6 Inch = 150mm o/d of pipe = 168.3mm (6") UPVC Screened Inline Overflow Fitting Available with: UPVC Pipe Ends Stub Flange Ends Rubber Seal Ends (150-175mm) All screens inside these fittings are made from Stainless Steel.

(6") Screened Tank Overflow Kit (150mm NB - 168.3mm OD) A Screened overflow Kit for a potable (drinking) water tank must be at least twice the size of the inlet used on the tank. The overflow fitting is a necessary item for any storage tank, and part of the water Regulations for potable water tanks these Overflows must be screened to prevent igress of insects into the tank, these regulations were more commonly known as BYLAW 30. 6 Inch = 150mm NB UPVC = 168.3mm OD (6") UPVC Screened Overflow Fitting with (3/4") PP Screened Warning Pipe, PP Screened Tank Vent, Available with: UPVC Tank Connector UPVC Stub Flange All screens inside these fittings are made from Stainless Steel.

DT165PW has been developed as a high build solvent free urethane coating system suitable for the long term maintenance free protection. Is suitable for immersion conditions, specifically for potable water but also in chemically polluted marine or underground environments. DT165PW is formulated to combine outstanding abrasion and impact resistance with a significant degree of flexibility. With a reduced curing time compared to DT162PW allowing for quicker overcoat time, Accordingly this coating is designed extensively for diverse applications. DT165PW has been specifically developed for the long term protection of:: Internal and external surfaces of tanks Cement and steel tanks Drinking water storage tanks DT165PW has excellent resistance to abrasion and mechanical damage. We would recommend a minimum of two coats for most applications. Standard colour: Grey. 2Ltr set will cover approximately 1m² (based on two coats) Supplied in two parts: Base component Activator component DT165PW has an average pot life of 20mins, touch dry within 3 hours, overcoating between 3-24 hours, hard dry in 6 hours and fully cured 7 days. WRAS Approved Product Usual delivery of this item is 3-5 Working Days

DT162PW is a Two component solvent free epoxy coating suitable for drinking water. with excellent resistance to abrasion and mechanical damage, excellent adhesion on correctly prepared surfaces and excellent erosion resistance particularly recommended for immersion in aqueos slurries. DT162PW has been specifically developed for the long term protection of: Concrete and steel tanks Drinking water Storage tanks Process tanks and Other water retaining structures DT162PW is available for application by brush or roller in one or more coats, we would recommend a minimum of two coats for most applications. 1 litre set will cover approximately 2m² (based on two coats) Supplied in two parts: Base component Activator component DT162PW has an average pot life of 45mins, touch dry within 6 hours, overcoating between 6-24 hours and fully cured 7 days. WRAS Approved Product Usual delivery of this item is 3-5 Working Days