Drayton Tank and Accessories Ltd
We are leading Manufacturer and suppliers of GRP Water Tanks, storage tanks, water tanks, Break and balance tanks, Along with Waste and chemical storage solutions, and fittings and accessories for these tanks, distributed throughout the UK.
Products include: Cat 5 Type AB Airgap water tanks, waste and chemical tanks, one piece tanks, two piece tanks, sectional water tanks from 45 litres up to 100,000 litre and more. Range of standard sizes tanks and bespoke special tanks sizes for customer specific sizes, Our range of tank fittings including overflows and accessories is also vast.
Options include:
- GRP One Piece Water Tanks
- GRP Two Piece Water Tanks
- Wras Approved Potable Water Tanks
- Balance Tanks
- Screened Tank Overflows
- Cat 5 Backflow Prevention (Type AB Airgap)
- Byelaw 30 Water Tanks to water regulations 1999
- Ballvalves - Equilibrium and Delayed Action Float Valves
- Header Tanks
- F&E - feed and expansion tanks
- Waste Water Tanks and Effluent Tanks
- Chemical storage and hot water tanks
- Access Hatches
- Drip Trays
Filter products and services
-
1000 Ltr F&E Preinsulated One Piece GRP Storage Tank
1000 Ltr F&E Preinsulated One Piece GRP Storage Tank
F&E Preinsulated One Piece Storage Tank Manufactured to BS EN 13280, made from WRAS Approved Materials
Internal Dimensions (L x W x H): 1000 x 1000 x 1000mm
External Dimensions (L x W x H): 1170 x 1170 x 1100mm
Manufactured with GRP Resins that are designed to withstand water temperatures up to 90 Degrees C, finished with a Gelcoat internal surface to prevent bacterial growth and importantly helps to keep the water as clean and fresh as possible.
The tank has Insulation encapsulated into the tank walls and Lid, as a result the external finish is cleaner.
Supplied with a Flange around the top of the tank with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects.
Balance Tanks are designed to ensure that the water in the pool is kept at the correct level
Swimming pool balance tanks need to be emptied and cleaned on an annual basis, whilst spa pool balance tanks requiring cleaning on a weekly basis
For more information on Feed and Expansion Tanks please Click Here
Litres are Nominal Capacity (to the Brim of the Tank)
Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base.
There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base.
There is a 25mm radius at the edge of each wall of the tank and also onto base.
A Usual Lead time for the tank is shown on this product, please check with us as this lead time can increase at busy times.
For more size options available on our standard tank sizes please Click Here
Request a Quote Supplied by Drayton Tank and Accessories Ltd -
15mm (1/2") Brass BSP Connection
Made from a compact Solid Brass construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 brass washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
15mm (1/2") Stainless Steel BSP Connection
Made from a compact Solid 316 grade Stainless Steel construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 Stainless Steel washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
22mm (3/4") Brass BSP Connection
Made from a compact Solid Brass construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 brass washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
22mm (3/4") Stainless Steel BSP Connection
Made from a compact Solid 316 grade Stainless Steel construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 Stainless Steel washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
25mm (1") Brass BSP Connection
Made from a compact Solid Brass construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 brass washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
25mm (1") Stainless Steel BSP Connection
Made from a compact Solid 316 grade Stainless Steel construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 Stainless Steel washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
32mm (1 1/4") Brass BSP Connection
Made from a compact Solid Brass construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 brass washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
32mm (1 1/4") Stainless Steel BSP Connection
Made from a compact Solid 316 grade Stainless Steel construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 Stainless Steel washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd -
38mm (1 1/2") Brass BSP Connection
Made from a compact Solid Brass construction which ensures a water tight connection, the connection has a male BSP body with a female BSP thread running through it and is designed so that if required it can be fitted soley from the outside of the tank. with two rubber jointing washers to ensure a good seal to any flat surface making these connectors quick and easy to fit. Supplied with: x2 brass washers (x1 split) x2 rubber jointing washers Washer Selection: Rubber washers suitable for temperatures upto 60 Deg. EPDM washers suitable for temperatures upto 90 Deg SX washers suitable for temperatures upto 120 DegRequest a Quote Supplied by Drayton Tank and Accessories Ltd