Caleb Components Ltd

  • Block 6, Grazebrook Industrial Park
  • Peartree Lane
  • Dudley
  • West Midlands
  • United Kingdom
  • DY2 0XW (map)

  • Tel: 01384 453955
  • Fax: 01384 257423
  • Website: www.calebcomp.co.uk

Contacts

  • Andy Elliott, Managing Director
  •  
  • Number of Employees: 1 - 20

Download our Catalogue


Download our Catalogue

Caleb Components was formed with the purpose of fulfilling customers requirements of spring type fasteners in all materials. Although this range of fasteners is vast we specialised in three common types; circlips, spring tension pins (also known as sellock and roll pins) and the versatile disc spring/belleville washer range.

External Circlips


External Circlips

Circlips are extensively used in many forms and provide a favourable and inexpensive securing device. They vary from the simple wire ring to the more robust circlip which offers substantial axial thrust.

Caleb offers from its stock range what is generally considered the more common types of Circlips. Manufactured to a high degree of quality we offer a very cost effective method of securing device.

The standard material for Circlips is carbon Spring steel with standard black and oil finish.
Alternative finishes are also available such as Mechanical, Electro Zinc as well as Deltatone.
We would be pleased to discuss your requirements.

Caleb Components also offers a comprehensive range of Stainless Steel part from stock.

Internal Circlips


Internal Circlips

Our 472 range is probably the most common form of internal axially fitted circlip. They provide continuous radial force and are suitable for applications requiring a strong centrifugal force as well as being secure against high rotational speeds.

Fitting or removal is simplified by the use of Circlip Pliers.

Heavy Duty External Circlips


Heavy Duty External Circlips

Our DIN 1460 range of heavy duty external circlips provide all the characteristics of a standard DIN 471 Circlip but with a thicker material offers a far greater shock force resistance than a standard Circlip.

Our DIN 1460 heavy duty external circlips range is also able to resist greater conical deformation where for example large abutment radii is present.

We also offer on a request a stainless steel version of this product as well as a DIN 1360 range, which is the internal version of the above. Available in carbon and stainless steel.

'E' Type Circlip


'E' Type Circlip

Our ETC range ('E' Type Circlip) is probably the most common radially fitted circlip gripping the groove of the component at three points. The 'E' Type Circlip has a great deal of flexibility in that once the groove is established to suit that of the circlip the shaft has flexibility to several millimetres on larger sizes.

Spring Tension Pins


Spring Tension Pins

Our spring tension pin is also known as a Roll Pin or Sellock Pin. It has many attributes making it a functional securing, locating and hinge pin device.

The spring tension pin has many advantages as a fastener. Pins are generally manufactured from carbon spring steel and supplied with a self / plain finish. However Caleb is able to offer stainless steel parts (including high specification 316 (A4)) on request and also offer plated finishes such as electro zinc and passivate or Deltatone.

Disc Springs


Disc Springs

Over the years the Disc Spring has become more finely honed with greater degrees and accuracy for both forces and deflections.

With the introduction of DIN 2092 calculations, it is now possible to either select or design a Disc to meet a customers specific requirement.

At Caleb Components, we have introduced to our range, special Alloys for more specialised use.

For example, Inconel 718, X750 and other high temperature materials. As characteristics change for Disc Springs manufactured from these materials, we can offer design and data suitable to your requirements. 

Caleb Components can offer a large choice of standard Discs Springs or even design and provide a special to suit your requirements. With our specialist Disc Data program we can provide a print-out covering all the relevant details.

Ball-bearing Pre-load Disc Springs


Ball-bearing Pre-load Disc Springs

Ball-bearing Pre-load Disc Springs are especially designed for use with radial ball bearings and maintain positioning accuracy of the bearing with no end play. These Ball-bearing Pre-load Disc Springs minimise vibration and shaft deflection. Proper pre-loading will increase bearing rigidity and help eliminate excessive running noise.
 

Heavy Duty DIN 6796 and Serrated Safety Washers


Heavy Duty DIN 6796 and Serrated Safety Washers

Using the same concept of the Disc Spring, the Serrated Safety Washer has the special feature of radial serrations on both surfaces. When tightened to near capacity these serrations bite into the mating surfaces, thus preventing the loosening of the screw due to vibration and other similar circumstances. Serrated Safety Washers offer a reduction in the outside dia thus corresponding with most screw head sizes, particularly hexagonal socket type screws

At Caleb Components, we have introduced to our range, special Alloys for more specialised use.

For example, Inconel 718, X750 and other high temperature materials. As characteristics change for Disc Springs manufactured from these materials, we can offer design and data suitable to your requirements. 

Shims and Support Washers


Shims and Support Washers

Incorporating DIN 988

Shims and Support Washers are used in a wide variety of applications. Typical applications of our Shims and Support Washers would be to take up excessive space or play within a component or application

Split Cotter Pin DIN 94


Split Cotter Pin DIN 94

Split cotter pins are a simple securing device. Simply push through a drilled hole and bend back the legs.

Our standard range of split cotter pins are generally manufactured from mild steel and have a Bright Zinc Plated finish.

However parts are also available on request in stainless steel and brass.

Calebs Kits


Calebs Kits

Caleb's kits offers a variety of sizes of our popular products including Circlips, Internal and External both in carbon and stainless steel. As well as these we offer Disc Springs and Spring Tension Pins.

These kits can be useful for maintenance departments, tool rooms, engineering shops and garages. Ideal if you just require just a few parts of our products.

Support resources

Call Applegate +44 (0)345 600 7177 AS