Gotec Pumps Ltd

  • 32 St Helens Way
  • Benson
  • Wallingford
  • Oxfordshire
  • United Kingdom
  • OX10 6SW (map)

  • Tel: 01491 835350
  • Fax: 01491 201360
  • Website: www.gotecpumpsuk.com/

Contacts

  • Mike O'Hanlon, Director
  • Mike O'Hanlon, Managing Director
  • Mike O'Hanlon, Owner
  •  
  • Number of Employees: 1 - 20

Gotec Pumps Ltd


Gotec Pumps Ltd is the exclusive UK distributor for Gotec SA the Swiss manufacturer of high quality Electromagnetic Piston Pumps.

These are suitable for a variety of applications from Carpet Cleaners to chemical dosing.

For more information go to www.gotec-pumps.co.uk  or www.gotec.ch.

We are also the distributors of the Eckerle Hydraulik internal gear pumps suitable for applications from Forklift Trucks to Hydraulic Presses.

Eckerle Elektroniks manufacture Electronic Ballasts for the industrial lighting industry
For more information on Pumps and Ballasts go to www.eckerle.com
.

Eckerle GMBH is the parent company of Gotec SA.

Gotec Pumps Ltd
0044(0)1491835350 Phone
0044(0)1491507017 Fax
0044(0)7796134601 Mobile
Contact Mike O'Hanlon.

Eckerle GMBH


Eckerle are manufacturers of Hydraulic Gear pumps. Condendate pumps for airconditioning and heating. Oil lifter pumps for oil heating systems. and Electonic ballasts for lighting systems.

www.eckerle .com.

Piston Pumps


Piston Pumps

The piston (5) is moved by the electromagnetic field generated by the single wave diode rectified current flowing through the coil (4). Each current pulse moves the piston against the pressure spring (3). This movement by reducing the volume in the suction chamber, opens the valve (6) set in the piston to let the liquid run into the pressure side. When the current pulse ceases, the pressure spring pushes back the piston toward the pressure side. The increase of pressure closes the piston valve and the liquid flows through the valve (7) set in the pressure connection (8) and into the pressure pipe. This movement creates a low pressure in the suction chamber which opens the valve (2) set in the suction connection (1). The liquid is sucked into the pump and the cycle starts again, 50 times per second (at 50 Hz).
 

Support resources

Call Applegate +44 (0)345 600 7177