Applegate Supplier Network
We're always allocating requests for quotations to businesses in our network for products and services required by our registered buyers.
By joining the Applegate Supplier Network you could be selected to quote on enquiries relevant to your business.
Could you have Quotes on any of these requests?
Below you'll see a selection of quotes that Applegate Marketplace has had. You could be quoting on these requests by adding yourself to our Supplier Network, and it's never been easier to do so.
Join today and tell us what industry sectors you supply and we'll start allocating relevant enquires to you.
You'll also receive a number of benefits from joining the Applegate Supplier Network, you can find out more here.
Last updated 01/10/2020 | |||
RFQ Title | QTY | Type of Product | Drawings |
Ejector Screws | 100 | The buyer is looking to manufacture and supply 100 ejector screws as per drawing. quotes to be supplied with Certificate of conformity and mill cert. | Yes |
CNC Router for Wood Cutting | The buyer is looking for a company that can provide a CNC router service to cut wooden blocks into multiple shapes for an ongoing supply. | Yes | |
Logo Laser Cutting | The buyer is looking to laser cut a logo in the middle of an acrylic plastic square. | Yes | |
Fabrication of small metal tray | The buyer is looking for a small metal tray to be fabricated, 1m x 1m Aluminium Tray with rounded/lipped edges. | ||
Stainless Steel or Aluminium Cutting | 407 | The buyer is looking to source parts in 0.5 mm stainless steel or aluminium with a cutting accuracy of ± 0.1mm. Three DXF files are available to Applegate suppliers. | Yes |
Furniture Legs | 10000 | The buyer is looking to get two sets of furniture legs manufactured and fabricated out of stainless steel, volume is currently 10,000 per month per item (100 lines), the legs wills require a matt laquer and ral9005 finish. Tolerances and quality control must be met, looking for samples and a potential site visit. NDA required. | |
Gear Manufacture | 12000 | The buyer is looking 6 differant gears to be manufactured, all the drawings have been recently updated and are in PDF format. The buyer is after different price point for 100, 500, 1000 and 2000 units is possible. | Yes |
Laser Cutting | 50 | The buyer is looking to get a laser cutting job done. | Yes |
Bearing Housing | 20 | The buyer is looking for the attached drawing to be machined from either 6063 or 2000 aluminium. Full drawing is available to Applegate suppliers. | Yes |
Dowels Manufacture | The buyer is looking to get some dowels manufactured, the information The bueyr has is 18x600mm dowels, 1.5mm slot through dowel, along 85mm. 5.5mm holes perpendicular to slot at 30mm and 60mm from end of dowel. They dont currently have a technical file but the word doc attached should contain all the information needed to quotes on the cad creation and manufacture. | Yes | |
3D Rubber Moulding | 4 | The buyer is looking to get 4 pieces of 3d rubber moulding made. | Yes |
Laser Profiling/Milling | 100 | The buyer is looking for some tubesto be milled or laser profiled, to 0.05mm tolerances.Surface finish- Grained satin finish, with scratches removedIt's for housing a sensor PCB so the position of the cut outs is important as is the internal and external dimensions of the tube. | Yes |
Gear Manufacture | 12000 | The buyer is looking to get a potential of 12,000 gears manufactured but with each of the 6 different gear styles requires price cuts for 100, 500, 1000 and 2000 units are required, All relevant drawings and PDF's are attcthed to each line item and delivery is to Kaunas, Lithuania. | Yes |
Clear Plastic/Perspex Hemisphere | The buyer is looking for a potential long term supplier for a 300 mm clear plastic/perspex hemisphere with flange. | Yes | |
Prototype Manufacture | 4 | The buyer is looking to get 2 of each part found attached manufactured, the material has to be mild steel and the inner doesnt have to be seamless and its just standard. Please quote for 4 pieces as this is in the assembly, if this part entered constant production we would want to use the same supplier and the amount required would be in its 1000's | Yes |
Wood Cutting | The buyer is looking for various items to be cut from MDF and hard wood. The full drawing is available to Applegate suppliers. | Yes | |
Plastic Injection Moulding - Folder | 250 | The buyer is looking to get 250 folders made with plastic injection moulding with steel moving parts. | Yes |
Hydro-forming or Laser Cutting | 600 | The buyer is looking to get a supplier to hydroform the attached part after not being able to laser cut it. The annual requirement is 600 units but 50 pcs each time. Smooth edges required with no deburrs. | Yes |
Sheet Metal Fabrication | 30 | The buyer is looking for some some mild steel parts to be cut, folded, have some fittings pressed in with a small amount of welding and finishing. these will be made in 3 different assembly units, the welded units and 2 other assemblies that can all be seen via the 7 attachments they need 10 of each assembly. | Yes |
Engineering design | 1 | The buyer is looking for a company to manufacture a prototype of the metal hook you will find atattched, the desired material is stainless steel. | Yes |
Guitar Neck Manufacturing | 100 | The buyer is looking for the manufacturing of guitar necks in maple wood. | Yes |
Pressed Steel Machine Part | 5000 | The buyer is looking to get a quote for 5000 pressed steel parts, the material has to be C300 Maraging steel - please find a PDF and 3d CAD files attached, this could turn into something more regular. | Yes |
5 Axis Laser-Cut | 50 | The buyer is looking to get a quote put together for a machinist to laser cut 50 bent tubes, they will require a 5 axis laser and edges need to be smooth and no deburrs. Here is the drawing for M0552 (use M0582 tolerances required). | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
CNC Routing | The buyer is looking to get a quote for routing a template onto an 18mm piece of ply. | Yes | |
Wood manufacture | 100 | The buyer is looking to manufacture the attatched parts. first a prototype but then around 50 to 100 units of the attached part. The preferred material is birch wood from a sustainable source but alternatives will be taken into consideration. | Yes |
Injection Moulding | The buyer is looking for an injection moulding to produce 10k to 25k units per week in RP348U. | ||
Turned EN24T Hex Rest Pins | 40 | The buyer is looking for a manufacturer to produce 4 variations of EN24T Hex Rest Pins, a total of 40 units required. Material in all cases is EN24T, hardened and oxide black.This is a one off order. | Yes |
Stainless steel flat laser cut | 100 | The buyer is looking for a supplier to cut 100 of 2 different parts. Cut from DP1 304 Stainless steel, 2mm thickDe-burred/ all sharp edges removed. | Yes |
Pad Printing | The buyer is looking for a company that can provide pad printing or a similar method to print patterns onto a puzzle. | Yes | |
Shelving Unit Manufacture | 1 | The buyer is looking to get a shelving unit manufactured. | Yes |
Finger Plates | The buyer is looking for 5 finger plates and nickel plating for their vintage radio. | Yes | |
Welded fabrication of machine pedestal | The buyer is looking for a manufacture to weld and fabricate a machine pedestal out of mild steel. Mounting surface and feet to be machined finish. Full drawings available. | Yes | |
Tooling for Manufacturing | 1 | The buyer is looking to source the tooling and part supply of a safety station. | |
Knurled CHS33.7x3 various lengths | 80 | The buyer requires a manufacturerCHS33.7x3 bar cut to length with 140mm knurled central. 8 different length ranging from 196-284mm. For now, we want 10 of each length (80 bars in total). Full drawings avaliable. | Yes |
Sign CNC Machining Request | 2 | The buyer is looking to get a sign to be manufactured. | Yes |
Black Oxide Coating Stainless Steel | The buyer is looking for the repeat order of black oxide coating of stainless steel parts. Full drawings are available to Applegate suppliers. | Yes | |
Aluminium Mounting Plate | The buyer is looking for a supplier to prototype an aluminium mounting plate for my racing simulator. Technical drawings are available to Applegate suppliers. | Yes | |
Rapid tooling and injection moulding company | The buyer is looking for a tooling and injection moulding company to rapid injection mould 10-30k units per week with high polish finish. | ||
Aluminium CNC Milling | 1600 | The buyer is looking for some milling to be completed. find the STEP files attached. 400x Tear Spacer 10mm Base 400x Tear Spacer 15deg 5mm 800x Tear Spacer 10mm All in Aluminium. outer holes to be a tight tolerance fit for an M5. | Yes |
Casing Requirement | The buyer is looking to source a company who can assist in a metal casing requirement out of stainless steel. | ||
3D Metal Prototyping | The buyer is looking to source prototype parts as per the 3D files that are available to Applegate suppliers. | Yes | |
Aluminium Machining | The buyer is looking to CNC machine 4 alignment jigs out of Aluminium grade 303 with 0.1 tolerances. | Yes | |
Combustion changer part | 10 | The buyer is looking for 10 of the attached part to be made from inconel 625 or another inconel that can be used in a combustion change and be exposed to high temperatures. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Aluminium part | 1 | The buyer is looking for The attached part to be machined in 6082 aluminium and it has to machined to a .1 tolerance. One-of. | Yes |
Copper/Aluminium Electroplating | The buyer is looking to electroplate a thermoplastic horn in either aluminium or copper. | Yes | |
CNC Supplier | The buyer is looking for a CNC supplier to CNC 18 mm MDF to specification of their CAD designs. | Yes | |
Surface Treatment Polishing | The buyer is looking for SS201 surface treatment polishing for 5000 units. | Yes | |
Flue manufacture | 399 | The buyer is looking for a supplier to make a complete flue unit from aluminium or S/S, all diameters can be found on the request as well as technical drawings plus images of their current design attached. The buyer is open to new designs plus creative solutions to any issues. | Yes |
Vacuum Forming for Food Trays | The buyer is looking for assistance in the design and manufacture of disposable plastic food trays. | ||
Solid Bar with Turned Down Ends | The buyer is looking for an ongoing supplier of 28 - 35 mm diameter bars with 24.5 mm turned sections. | Yes | |
Plastic Cases Injection Moulding | The buyer is looking for injection moulding and mould tooling companies to assist in the manufacture of plastic cases for pharmaceutical bottles. | Yes | |
Face shield manufacturing - casting/moulding | 500 | The buyer is looking to team up with a casting or moulding company to help in the manufacture of face shields for the frontline/key workers. to start they want prices for both 500 pieces and 2500+ pieces. | |
Injection Moulders | The buyer is looking for injection moulding companies who can assist with the final designs and manufacture of pieces which create a puzzle. Example image provided. | Yes | |
Injection Moulding of Small Turbine Blades | The buyer is looking to manufacture blades for small wind turbines. The blades use a NACA 4412 airfoil as their cross-sectional shape and have a radius of 0.2025 m. Each blade required has a volume of 18.3 cm^3. The buyer would like to manufacture 20,000 blades out of LCP using injection moulding. The buyer requires the tooling to be manufactured and has provided document with technical drawings.The buyer has requested a full breakdown of production such as unit cost per blade, tooling costs etc. | Yes | |
Bottle Machining | 11000 | The buyer is urgently looking for 11,000 x 100ml bottles & spray top & cap in white PET or HDPE. | |
18mm Shelf Dividers | 300 | The buyer is looking for a company that can bend and weld shelf dividers in either carbon steel or stainless steel. | Yes |
Chrome plated metal extrusion | The buyer is looking for 2.2 meter metal extrusion with chrome finish for a door handle. Initial prototype required. | Yes | |
Plastic Extrusion | 1 | The buyer is looking for a plastic part to be extruded from UPVC, the colour needs to be brown and the dimensions are 2.5meter by 80mm x 80mm and this is a box section piece. alternative plastic are welcomed but must be weatherproof. | |
Low Volume Plastic Extrusion | The buyer is searching for a manufacturing partner and require a 20 meter long plastic extruded prototypes. | Yes | |
Adapter Plate | 1 | The buyer is looking to get the part attached manufactured from 45mm thick aluminum the price to beat is £190 This is a one-off piece. | Yes |
Children hand sanitizers | 100 | The buyer is looking to find a manufacture that can produce 35ml hand sanitizer bottles. the lids are important as they must be leak-free and have a keyring hole. Target audience is ages 5-8. | |
Rotary die-cutting services | The buyer is looking for companies who can supply die-cutting services to partner in the manufacturing of face visors for front-line workers. | ||
Stainless steel fabrication | 1 | The buyer is looking for someone to manufacture the attached part. They need it in stainless steel and they also require full material traceability. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Containment Flange Parts | 5 | The buyer is looking to get quotes on 3 differant parts, 1 x Containment Flange ‘A’ (items C, D E and F) 3 x Containment Flange ‘B’ (items C, D and E) 1 x Containment Flange ‘C’ (items C, D E and F) | Yes |
Bronze piece production | 10000 | The buyer is looking to manufacture 10,000 keyring piece out of bronze/copper mix. | Yes |
LSR Injection Moulding | 25000 | The buyer is looking for a company to injection mould 25,000 masks out of liquid silicon rubber. Full technical drawings available. | Yes |
Injection Moulding | 500 | The buyer is looking for a company to injection mould and web 500 action man figures, ongoing order in 3 separate colours. | Yes |
FFP3 Filters | The buyer is looking for a company to manufacture 1,000,000 filters for medical masks. | Yes | |
Stainless Steel Machining | 10000 | The buyer is looking for a machinist to help manufacture a new product, looking for quotes on up to 10,000 of 3 different parts to be machined out of stainless steel. Full technical drawings available. | Yes |
304 stainless steel ferrules | The buyer is looking for a machinist to manufacture 10,000 rope ferrules from 304 stainless steel, Drawing is attached for further details. | Yes | |
Elbow Diecasting | 10000 | The buyer is looking for Aluminium diecasting quotes to produce parts for a brand new product, to be launched towards the backend of the year. This project is still in the costing stage with quantities of up to 10,000 off required. | Yes |
Bar Extrusion | The buyer is looking for quotes on the extrusion of 2 parts for a new product to be launched later this year. Quantities of up to 10,000 off to be quoted in Stainless steel and 1060 Alloy. | Yes | |
200-250-500ml Bottles for hand gel | The buyer is looking to expand their capacity of producing hand gel and needs plastic bottles readily available. | ||
Blow Moulding | 10000 | The buyer is looking to for the blow moulding of the attached in HDPE. Step file available to Applegate suppliers. | Yes |
Fixing wedge machining in aluminium | The buyer is looking to get a 1 off wedge machined out of solid aluminium. technical drawing are available. | Yes | |
Custom bottles | 100 | The buyer is looking to get a manufacture or whole-seller the quote on some custom pipette bottles (glass dropper and bottle) the image below is what is required and the bottle must be translucent the rose gold should only be the base of the lid and the pipette top itself should ideally match the bottle. | Yes |
Prototype Washer | The buyer is looking to get a plastic washer manufactured as a part of a model car. They are initially looking for prototypes. | Yes | |
Custom PET Bottles | The buyer is looking to source suppliers who can manufacture blow moulded PET bottles, initial order quantity of 20-50,000. | Yes | |
GPU reballing (iMac) | The buyer is looking for a company to GPU reball an iMac. | ||
Bottle Manufacturer | 100 | The buyer is looking for the manufacturer of 16oz PET amber bottles with a white cap. | Yes |
Machining and Fabrication | 6 | The buyer requires 6 x 5 mm thick mild steel plates that require machining and welding. Full technical drawings are available. | Yes |
Manufacturing of Prototype Rubber Matting | The buyer is looking to establish contacts with UK based manufacturers of high-density rubber to create a prototype for a rubber exercise mat. | Yes | |
Aluminium Tubes for Pull-up Bar | The buyer is looking to get 2 aluminium tubes, 35 cm in length manufactured for vertical uprights on a pull-up bar. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Struts - LH/RH/CENTRE | 36 | The buyer is looking to cast/manufacture 36 struts (12 of each) all dimensions and drawings are attached. must be manufactured using 6082 aluminium. | Yes |
Cutting for stainless steel worktop | The buyer is looking to cut 3 separate pieces for a stainless steel worktop made from 316 stainless steel. | Yes | |
Heat Treatment | The buyer is looking to get a bicycle frame made out of Aluminium to be heat treated. | ||
Plastics Machining | The buyer is looking to replicate an exisiting plastic moulded cover that is under 1 m x 1 m and is around 3 mm thick. | Yes | |
500ml Plastic Bottles | The buyer is looking to get 2000 500 ml plastic bottles Manufactured. | Yes | |
Concrete Sphere Mould | The buyer is looking to get 5 plastic/rubber moulds of varying sizes manufactured to make concrete spheres. | ||
Part for Airline Suite | The buyer is looking to get a trim for stowage manufactured from Aluminium. | Yes | |
VR Reader Manufacturers | The buyer is looking for the engineering, design and manufacturer of VR readers that are vandal resistant and have an operation distance of 30 mm. | ||
Press Tooled Aluminium | The buyer is looking for the press tooling on a sheet of aluminium. Technical drawing is available to Applegate suppliers. | Yes | |
Vacuum Forming | The buyer is looking for the vacuum forming of ABS / HIPS that is also UL94-V0 rated. Full drawing is available to Applegate suppliers. | Yes | |
Laser Cutting | The buyer is looking for the laser cutting of 40 x 2 mm thick aluminium profiles with outer dimensions being 221 x 493.5 mm. Full drawings are available to Applegate suppliers. | Yes | |
Nylon Machining | 38 | The buyer is looking for the machining, turning and threading of various parts in black nylon 6 or 6.6. Full drawings are available to Applegate suppliers. | Yes |
Aluminium Ring | The buyer is looking to get a 1-off ring made of 6082 Aluminium manufactured. | Yes | |
Injection Moulded Camera Bracket | The buyer is looking a for rapid prototype of 2 camera brackets through injection moulding. 25 units for both camera brackets. | Yes | |
Aluminium Turned Parts | 2 | The buyer is looking for two parts to be machined in 6061 / 6082 aluminium with a tolerance of +/- 0.1 mm. Technical files are available to Applegate suppliers. | Yes |
CNC Machined Parts | The buyer is looking for the CNC machining of parts from 6082 aluminium with STEP files available to Applegate suppliers. | Yes | |
Chroming of Shower Waste Cover | 1 | The buyer is looking for a plastic shower waste cover to be chromed, with a 210 mm diameter. | Yes |
Injection Moulding | The buyer is looking to get 100, 1k and 10k quotes for some molding or alternatives on a hinge they require. | Yes | |
Laser Cut Plexiglass | The buyer is looking to get some hotel room numbers cut from black,white or sliver plexiglass, 2/3mm thick, | Yes | |
Vacuum Forming | The buyer is looking for 15 transparent plastic domes to be created, 1mm thick, 36cm diameter, 1 sample preferred. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Stainless steel grate | Buyer is looking for a stainless steel drainage grate: 173mm x 1000mm x 20mm deep with slots for water to drain through. Drainage slots size aren't crucial. Potential order of 12-16 meters. | Yes | |
Plastic Components for Swimsuits | 1000 | The buyer is looking to get a CAD file created and 500 to 1000 recycled plastic components manufactured. | Yes |
Over Moulding Pins | The buyer is looking to get 60 pins for overmoulding manufactured in stainless steel. | Yes | |
Prototype Assembly Pen | The buyer is looking for recommendations for the production, samples and the production of assembly pens. Full information and technical drawings available upon request. | Yes | |
Nitrotec Treatment | The buyer is looking for 6 different products to be nitrotec. All items attached, 9xP156-036 and 1 of all others. | Yes | |
Christmas Tree Design Stand | The buyer requires a Christmas tree design stand which can hold four fabrications, approx 800 mm long, in 355 mild steel. | ||
Piano Hinge | 1 | The buyer is looking for a 3123mm long piano hinge that can be powder coated, 1nr is required, 10 days lead time. | Yes |
Case Hardening of Supplied Component | The buyer is looking to get one piece of tooling case hardened in any process and to be quoted on by the 20th. | Yes | |
Plate / Slotted Plate | 20 | The buyer is looking for a machinist to laser cut 2 different types of plate. 10 of each. | Yes |
Fibreglass Bar Machining | 10 | The buyer is looking for the machining of mill groves into 32 x 32 x 3 meter long fibreglass bars as per the drawing that is available to Applegate suppliers. | Yes |
Aluminium Laser Cutting | 40 | The buyer is looking for the laser cutting of 1.5 mm aluminium sheet metal. | Yes |
Compression Moulding | 100 | The buyer is looking for the compression moulding services for rigid plastics with a quantity of up to 100. | Yes |
Urgent Manufacturing Need | The buyer is looking to get prices today for, 2 off 10mm aluminium laser cut pieces, to be delivered on monday. | Yes | |
Sheet Steel Parts | The buyer is looking to get 3 different parts manufactured from steel sheets. | Yes | |
Ceiling Box & Spacer | 260 | The buyer is looking for the machining of ceiling boxes and spacers in aluminium and then bead blasted. | Yes |
DI12-SHAFT | 7,600 | The buyer is looking to get 7,600 shaft parts machined. | Yes |
Countersunk Washers | 200 | The buyer is looking for the machining and anodising of 20 x M6 countersunk washers in aluminium. | Yes |
Metal Plating on Plastic Parts | The buyer is looking for plastic parts to be injection moulded using ABS material with a smooth copper finish. | Yes | |
Rapid Prototyping | The buyer is looking to get a prototype manufactured within 4-5 working days in PLA with a sanded finish. | Yes | |
Glass Cutting Service | The buyer is looking for a glass cutting service to get 12 star shapes cut. 70 mm tall and 2 mm thick. | ||
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
CNC Machining | The buyer is looking for the CNC machining of the attached image in aluminium, STP files are available to Applegate suppliers. | Yes | |
3D Printing Service | 50 | The buyer is looking to source the 3D printing of the attached image in varying colours in eco resin. | Yes |
Plastic Component | The buyer is looking to get a plastic component manufactured. The part must be able to block UV light made out of Polycarbonate-Clear /mineral shade 5. | Yes | |
3mm Red Tinted Acryclic 4401 Diffuser | The buyer is looking for a machinist to cut 3mm red tinted acrylic, colour code 4401, and then engrave/rout it. | Yes | |
Racks | 2 | The buyer to looking fabricate 2 mild steel racks which are the mirror image of themselves and have a chrome plated finish. Bar intersections are welded. | Yes |
Prototype Rubber exercise mat | The buyer is looking for a manufacturer to produce a prototype sample of a high density rubber exercise mat. | Yes | |
Mcd LED | 400 | The buyer is looking for a machinist to CNC machine 400 MCD Led parts out of aluminium with a powdered finish. | Yes |
7-Segment Backplate & Cover | The buyer is looking for the CNC machining of a back plate and cover in 1.0 mm mild steel. Full ZIP folder of drawings available to Applegate suppliers. | Yes | |
Test Enclosure | The buyer is looking for the machining of a test enclosure, made up of 3 parts that are 12 mm thick. Full ZIP folder of drawings available to Applegate suppliers. | Yes | |
Vent Grilles | The buyer is looking for a grille and vent to be manufactured as a solid unit or the mesh to be machined for the buyer to cut in house. | Yes | |
RHS Parts For a Test Rig | The buyer is looking for a machinist to manufacture 4 box section arms, from RHS S355. Surface treatment zinc nickel plating. | Yes | |
850 Leadscrew Drive Cover | The buyer is looking for 10off and 20off of 850 drive cover iss a, on a regular basis, aluminium, hard anodised finish. | Yes | |
850 Leadscrew Drive Shaft | The buyer is looking for a machinist to produce 10 & 20off of 850 Leadscrew Drive Shafts, Stock finish, repeat order. | Yes | |
850 Ballscrew Nut | The buyer is looking for a manufacturer to machine ball screw nuts out of brass as an ongoing requirement. Full technical drawings available including finishes and tolerances. | Yes | |
850 Reversing Ballscrew | The buyer is looking for a machinist to produce 10off & 20off reversing ballscrew on a regular basis. | Yes | |
Leadscrew Drive Housing | The buyer is looking for a machinist to CNC mill 10off or 20off leadscrew driving housing out of aluminium. | Yes | |
850 Leadscrew Drive Plate | The buyer is looking for 10off & 20off 850 Leadscrew Drive Plate Iss A on a regular basis, machined out of aluminium. | Yes | |
Metal Washer / Spacer | 4 | The buyer is looking for 4 washers/spacers to be CNC machined out of stainless steal preferable. | Yes |
CNC Milling a Mould Tool | The buyer is looking for a company for can machine the attached in aluminium ideally in a single block. | Yes | |
Test rig parts | The buyer is looking for 16 different CNC machined parts out of steel, full technical drawings and dimensions available. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Supply & Cut Profiles | 10 | The buyer is looking for someone to supply and profile cut 35mm thick, Hardok 500, 1505x175mm, 10 off. Repeat. | |
Clear Acrylic Tubes | 24,000pa | The buyer is looking for clear acrylic tubes, as per the attached drawing, with quantity of 2k per month. | Yes |
MDF Cutting | The buyer is looking for a price for the attached cutting in STD MDF or primered MDF. | Yes | |
Stainless Steel Clips | 500 | The buyer is looking for the forming and bending of 500 x stainless steel clips as the attached drawing. | Yes |
CNC MDF cutting | 1 | The buyer is looking for a company to cut out a 6mm MDF, 2D shape. | |
Plastic Clips | 3 | The buyer is looking for the CNC milling of plastic clips in nylon 66 with a potential ongoing order. | Yes |
Heatsinks | 3 | The buyer is looking for the CNC milling of heatsinks in aluminium with a potential ongoing order. | Yes |
Gripping Jaws | 6 | The buyer is looking for the machining of the attached drawing in steel with a tolerance of +- 0.5 mm. | Yes |
Ladder Fabrication | 1 | The buyer is looking for the fabrication of a water storage tank ladder that is 3.5m in length in steel. | |
Lamp Body | 1 | The buyer is looking for the machining of a lamp body from aluminium ø50 H120 mm. | Yes |
Automatic Turning | 18480 | The buyer is looking for turning on various shafts, spacers and rivets with a total quantity of 18,480. | Yes |
Soldering of Stainless Steel Parts | The buyer has a requirement for the sub-contract assembly of a fluid reservoir filter by welding. | ||
Adaptor Machining | 2 | The buyer is looking for the machining of two adaptors, one with a 3/8" thread and one with a 1/2" thread. | Yes |
API Thread | 1 | The buyer is looking for quotes of the API thread that is attached in mild steel 36 KSI. | Yes |
Bespoke Machining | The buyer requires bespoke machining in 316L stainless steel with basic turning and gear teeth machining. | Yes | |
Spiral Staircase Fabrication | 1 | The buyer is looking for a fabrication company to manufacturer a spiral staircase complete with glass step. | |
Laser Cutting | 8 | The buyer is looking for a company that can laser cut in sheet metal and fold with drawings available. | Yes |
CNC Machining | 15 | The buyer is looking for a CNC machining manufacturer for requirements with detailed drawings available. | Yes |
Wire EDM | 20 | Wire EDM of the attached 1069-PT-005-01 drawing with a total quantity of 20. | Yes |
Double Sided Spring Plungers | 20000 | Manufacturer of 20,000 double sided springs in steel and coated in zinc after. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Acetal Sliding Tubes | 2 | CNC machining of acetal sliding tubes that can slide inside each other as per the drawing. | Yes |
American White Oak Base and Component Parts | 20 | The buyer would like the product cut to size and par planned to allow light sanding & application of oil. | Yes |
CNC Cutting - MDF components | The buyer is looking for a supplier who can cut 70 x MDF platform frames (800 x 125mm) and 250 of a smaller diameter. Full dimensions, drawings and sizes available. | Yes | |
Crankshaft Machining | 1 | The buyer is looking for the machining of a crankshaft with a 76.9 x 89 bore and stroke for a prototype. | |
Cladding of extruded aluminium | 600 | The buyer is looking to clad 5m lengths of extruded aluminium profiles in 316SS, 50 each over 12 month period. | Yes |
PTFE Lining | The buyer is looking for a vendor to provide a PTFE lining service to spools on the attached drawings. | Yes | |
Manufacturer of Pins | 50000 | The buyer is looking for the manufacturer of steel finished pins with a quantity of 5,000 every six months. | Yes |
Armchair Feet | 32 | The buyer is looking to source the milling of brass black patinated armchair feet with a total of 32 feet. | Yes |
Carbon Steel CNC Milling | The buyer is looking for CNC milling of carbon steel to make an Ashtray. Drawings available to members. | Yes | |
Cutting | 10 | The buyer requires 10 irons to be cut at a 45 degree angle in light plastic for their latest art project. | |
Electrical Discharge Machining | 30 | The buyer is looking to produce a large number of samples with small stripes machined on one face by EDM. | Yes |
Brass chopstick Rests Machining | 600 | The buyer is looking to manufacture 600 per week of brass chopstick rests, for ideally no more than £5 p/item. | Yes |
GA End Cap | The buyer is looking to have GA End Cap machined in an aluminium alloy that is suitable for anodising . | Yes | |
CNC Cutting Services | 3 | The buyer is looking to cut 3 individual items with the cutting size for the circle being a 711.2 mm diameter. | Yes |
CNC Milling | The buyer is looking for the CNC milling of the attached mould tool in aluminium with a quick turnaround. | Yes | |
Drilling | The buyer is looking to source the drilling of thermowells made from 304 stainless steel that are 440 mm long. | Yes | |
Sunglasses Engraving | The buyer is looking for the engraving on 2 pairs of sunglasses with initials and a date for their wedding. | ||
CNC Machining | The buyer is looking to CNC machine a prototype and additional larger batches of a plywood coffee table. | Yes | |
Cable Storage Holder | The buyer is looking for the vacuum forming of a cable storage holder with drawings available to suppliers. | Yes | |
CNC Machining | The buyer is looking for two parts to be manufactured from 316 stainless steel with slot cuts in a 12 mm plate. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Perspex Prototypes | 2 | The buyer needs quotes to create 2 off perspex prototypes of mood clocks. PDF planes provided upon request. | Yes |
Sheet Metal Laser Cutting | The buyer is looking for sheet metal laser cutting required for Material STRENX900. 15 sets required. | Yes | |
Transmission Shaft | 24000 | The buyer is looking for 24,000 p/year of transmission shafts to be CNC Turned out of structural steel. Full drawings and specification available. | Yes |
Water Jet Cutting 2D | 25 | The buyer is looking to get 25 pcs water jet/laser cut 2d. Individually 3 parts (yoke, plate & stop bar). Full drawings and dimensions available. | Yes |
Stainless Steel Tube Rolling | The buyer is looking to roll stainless steel tubes in to coils, material is all free issue 3/8" Swagelok 316. Full drawings available upon request. | Yes | |
Block Keep | 50 | The buyer is looking for the manufacturer of a 45 mm x 100 mm mild steel block with an L shape cut out. | Yes |
Spacers Bottom Bracket | 4 | The buyer requires four aluminium alloy spaces with an internal diameter of 30.13 mm and external of 33 mm. | Yes |
Lettering Cut Out | The buyer is looking for the cutting of letters that are made from plywood and then wrapped with steel. | ||
Hobbing | 110 | The buyer is looking to source hobbing of rotary guide units with a total of 110 with drawings available. | Yes |
Aluminium Hot Plate Parts | 6 | The buyer is looking for the machining of two parts around the Midlands area with drawings available. | Yes |
MDF CNC Machining | 10 | The buyer is looking for machining to manufacture 10 x bar top arcade cabinets in 18 mm thick MDF. | Yes |
Electroless Plating | The buyer is looking for a supplier who can plate (electrolessly) on PA11. Nickel or copper is fine. An NDA is required. | ||
Prototype Plywood Seat - CNC Milling | The buyer requires a prototype plywood seat to be CNC milled for a quick turnaround. Technical drawings available upon request. | Yes | |
Copper Base - CNC Milling | The buyer is looking to CNC Mill 3 parts; a copper base, a steel bracket & a plastic (Delrin) top. Full drawings available. | Yes | |
CNC Machining | 2 | The buyer is looking to source machining in a foam material, drawings are available to Applegate suppliers. | Yes |
CNC Turned Spigot | 1 | The buyer is looking to source a turned and machined spigot from either EN1A or BS-1407 silver steel. | Yes |
Machined Acetal Glove Rings | 60 | The buyer is looking to source 60 x machined oval glove rings from black acetal, a drawing is available. | Yes |
Precision Components | 8 | The buyer is looking for a company to machine parts out of stainless steel that are mounted in to the assembly. Full technical drawings including tolerances and hole sizes available. | Yes |
Machined Parts | 17500 | The buyer is looking to source a total of 17,500 parts, drawings are available to Applegate suppliers. | Yes |
Wristband Prototype | 20000 | The buyer is looking for 20,000 x rubber wristbands to be produced that is printed with various branding. | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Screen Printing | The buyer is looking for a screen printer that can turn plastic PETg 1.5 mm thick sheets into a blue colour. | ||
Prototype Quote | 43 | The buyer is looking for the manufacture of 25 separate parts from Aluminium and Acetal, low quantities. | Yes |
Threaded Bush | 104 | The buyer is looking for a precision machinist to manufacture 100 units including different finishes & material required. Full drawing and information available. | Yes |
Aluminium Spacers | 60 | The buyer is looking to source machining of two variants of aluminium spacers, with a quantity of 30 each. | Yes |
Front Wheel Spacer | 1 | The buyer is looking to have an aluminium front wheel spacer machined with an internal diameter of 30 mm. | |
3D Manufacturing Model | 1 | The buyer is looking to additive manufacture the attached part in either carbon or glass nylon. | Yes |
Tube Bending | 2410 | The buyer has a large requirement for bending with a ZIP file available of drawings for Applegate suppliers. | Yes |
Traction Motor Housing(s) | The buyer is looking for an ongoing relationship with a supplier who can cast the traction motor housing(s). | Yes | |
CNC Milling | The buyer is looking for a company to mill hole sizes +/- 0.05 out of mild steel in to 2 different parts. Further information available. | Yes | |
CNC Milling & Anodising | The buyer is looking for a company to mill holes out of aluminium alloy and anodise. Further information available. | Yes | |
Tufnol CNC Milling | The buyer is looking for a company to CNC Mill 0.05 hole sizes out of paper/phenolic/tufnol (black). Further details available. | Yes | |
Steel Brackets | 12 | The buyer is looking for a company to manufacture 2 different variants of brackets from sheet metal. Full drawings and sizes available. | Yes |
Adjustable Aluminium Wall Brackets | 20 | The buyer is looking to source the machining of brackets in aluminium, initially a prototype then an order of 20. | Yes |
CNC Milling - Spacer | 16 | The buyer is looking for a company to mill parts out of Aluminium Alloy, Tolerances: Hole centres +/- 0.05. | Yes |
Guide Tube - Servo knife | 39 | The buyer is looking for a company to CNC turn 39 Servo Knife parts out of Round Bar 316L Ø32. Full drawings available. | Yes |
Aluminium Fixtures | The buyer is looking to machinist to CNC tap aluminium fixtures. | Yes | |
Bronze Hockey puck | 1000 | The buyer is looking to produce 1000 hockey pucks in bronze with a good surface finish. | Yes |
CNC Milling - Carriage | The buyer is looking for a machinist to CNC Mill black Tufnol pieces. Tolerances: Hole centres +/- 0.05. Full drawings and details available. | Yes | |
Lens Accessory Holder | The buyer is looking for laser cutting of an item that can hold an accessory in front of a lens in steel. | Yes | |
Ring cutting | The buyer is looking for 5 rings to be cut, from 15mm birch face joinery grade plywood. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Machining of Flanges and Spade | 35 | The buyer is looking for a company to mill 11 different Flanges & Spades out of carbon steel. Full details and drawings available. | Yes |
Heat Treatment | The buyer is looking for a company to heat treat some 440C parts that are ø4" x 2.5m long. | ||
Steel Engineer | 100 | The buyer is looking for 100 x silver steel cylinders cut in to 13 x 7 mm pieces with a drilled 3 mm hole. | Yes |
Storage Box Machining | 100 | The buyer is looking for the fabrication of lightweight galvanised steel storage boxes for storing equipment. | Yes |
Elliptical Steel Gear | The buyer is looking for a manufacture to produce gears out of stainless steel with 200 micron thickness. Full specification details are available upon request. | ||
Strap Lugs Camera | 500 | The buyer is looking for replacement parts that are riveted onto an alloy camera shell in stainless steel. | Yes |
T6 Aluminium Plate | The buyer is looking to get a custom CNC Machined T6 aluminium plate cut to exact specification. STEP files provided and complete in the raw metal finish. | Yes | |
Guitar Parts | 20 | The buyer is looking to cut twenty plastic guitar scratch plate parts with the materials being provided. | Yes |
Chroming | 500 | The buyer is looking to chrome existing 3D printed parts in aluminium or copper. | Yes |
Machining of Sculptures | 8 | The buyer is looking for machining of 8 sculptures for an outdoor market and is open to various materials. | |
CNC Milling FV Finger | The buyer is looking for a machinist to Mill the attached drawing. Full details available to Applegate members. | Yes | |
Sensor Position Parts | The buyer is looking for a CNC Milling company to produce sensor position parts. Full drawings available, which include tolerances and finishes. | Yes | |
CNC Milling | The buyer is looking for a milling company to mill a low volume of units of the attached drawing. Full drawings available to Applegate members. | Yes | |
Bottom Plate | The buyer is looking to source turning of a centering fixture bottom plate. | Yes | |
Centering Fixture | The buyer is looking for a centering fixture STN20. | Yes | |
CNC Turning | The buyer is looking to source a centering fixture STN30. | Yes | |
Stainless Steel Sign Engraving | The buyer is looking for an A4 sized 1.66 mm thick stainless steel engraved with letters and a badge. | ||
Coating of Plastic Parts | 2 | The buyer is looking to coat plastic parts for a motorbike that is 10" x 6". | |
Spring Clip Holder | The buyer is looking to develop a holder to hold discs in front of a ledlink lens. | Yes | |
Plastic Extrusion | The buyer is looking to purchase extruded section, 50mm wide x 15mm thick & cut to length 1160mm section. | ||
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Rework of Heater Cartridges | 500 | The buyer is looking to rework cartridges that have been fitted with the incorrect connectors. | |
Foam Inserts | 700 | The buyer is looking for a manufacture to cut an initial 10 inserts for a product box, leading to volumes of 700. Full details and drawings available. | Yes |
Manufacturer of Table Tennis Net | 1 | The buyer is requires the manufacturer of a net with company logo engraved. Full specification available to Applegate suppliers. | Yes |
CNC Milling | 92 | The buyer is looking for a machinist to manufacture 7 different prototypes, e.g 24 x Clamp Plates. Full drawings available. | Yes |
Copper Bar | 12 | The buyer is looking for a machining company to manufacture 4 Bus bar prototypes. Full drawings available. | Yes |
Clamp plate | 18 | The buyer requires 3 items for prototyping6 of each (but would consider 24 if the pricing isn't hugely different); The CNC milling of A Clamp Plate, Clamp Foot and Clamp Mounting. | Yes |
Filter wheel | The buyer requires a laser cutting company to cut prototypes out of tufnol, 4 of each. Full drawings available. | Yes | |
Gold Plating | 4 | The buyer is looking to have 4 x stainless steel boxes to be gold flashed. | |
Drilling and Tapping of Holes | The buyer is looking to have M2 holes drilled into stainless steel boxes. CAD files are available. | ||
Machining | The buyer is looking to manufacturer a 'fin-can' that holds four water-jet cut/machined 4mm thick fins. More information is available to Applegate suppliers. | Yes | |
Chrome Dipping | The buyer requires dipping of a muzzle brake which is 50cm x 40cm. | Yes | |
Disc Engraving | The buyer has a 1360mm diameter disk that they require to be etched. | Yes | |
Laser Cutting Service | 20 | The buyer is looking to cut 20 pieces of 6 mm MDF. | Yes |
Laser Cutting | The buyer requires laser cutting with 3mm acrylic and 6mm MDF towards a 1/3 scale model of a chair. | Yes | |
Magnetic Bookend Manufacture | The buyer requires a stainless steel bookend with a magnetic piece. | Yes | |
CNC Machining | The buyer is looking to source CNC machining in aluminium of the attached image. | Yes | |
Vacuum-Formed Clamshell Packages | 10000 | The buyer requires vacuum-formed clamshell packages with a card insert fitting between the folded sides. | |
Fabrication | 75 | The buyer is looking for a supplier to develop drawings and manufacturer the attached image. Full specification is available to Applegate suppliers. | Yes |
MDF Cutting | The buyer has an urgent requirement for MDF to be cut in various sizes with a paintable taped edge. | ||
CNC Machining | The buyer has a large requirement for machining requests. An example of the drawings is attached. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
CNC Machining | The buyer is looking to source machining of a stainless steel plate. | Yes | |
Tubular Welded Subframe | 10 | The buyer is looking for quotes for TIG welding and fabrication of an e-bike front fork. Material 22.2mm OD 4130 Cromoly or equivalent. | Yes |
Tags | 50 | The buyer is looking to produce tags in sterling silver starting with an initial test run but it will be an ongoing order. | Yes |
Airsoft Gun Slide Alterations | The buyer is looking for a supplier that can machine parts for his company including cutting ports or shaping existing slides. | ||
Electric Car Controller Chill Plate | 1 | The buyer is looking to get an electric car controller chill plate that requires milling and threading with basic tolerances. | Yes |
Stormtrooper Helmet Part | 1 | The buyer requires a part 3D printed for a stormtrooper helmet. | Yes |
Rolls | 10 | The buyer requires CNC turning for rolls for stands. Full technical drawing is available to Applegate suppliers. | Yes |
Wood Machining | The buyer requires CNC arcade cabinets using 18mm MDF, full description of work will be given on request. | Yes | |
Mould Manufacturer | The buyer requires a manufacturer who can produce a mould for chocolate, dimensions are 8 inches long with a 1 1/2 inch diameter. | ||
Tubular Seat Bracket | 1 | The buyer is looking to source a seat bracket but there is the opportunity for repeat orders. Full drawings are available to Applegate suppliers. | Yes |
Room Divider | 1 | The buyer is creating a room divider and needs the aluminium shell cut out and folded. Aluminum thickness is 1.5mm. Technical drawings are available to Applegate suppliers. | Yes |
CNC Service | 200 | The buyer is looking to source 15mm thickness discs with chamfers cut from HDPE. Full technical drawings are available to Applegate suppliers. | Yes |
EDM Product | The buyer is looking to source the attached image with a 7.6 microns clearance. More information is available to Applegate suppliers. | Yes | |
Tubular Welded Subframe | 10 | The buyer is looking for quotes for TIG welding and fabrication of an e-bike front fork. Material 22.2mm OD 4130 Cromoly or equivalent. | Yes |
Box Mod Enclosures | 30 | The buyer is looking for a manufacturer to make box mod enclosures in aluminium, brass and copper with their logo engraved. Internal dimensions are 110 mm x 50 mm x 30 mm. | Yes |
CNC Machining | 1 | The buyer is looking for CNC machining of a stainless steel plate. | Yes |
Surface Grinding | 1 | The buyer requires surface grinding to a flatness of 2.5 um. Technical drawing is available to Applegate suppliers. | Yes |
Mould Manufacturer | The buyer requires a manufacturer who can produce a mould for chocolate, dimensions are 8 inches long with a 1 1/2 inch diameter. | ||
CNC Machining | 2 | The buyer is looking to source CNC machining of a stainless steel parts. Additional drawings are available to Applegate suppliers. | Yes |
Bespoke Stainless Steel Trailer | The buyer is looking for a fabrication company who is able to create a bespoke Stainless steel trailer with stainless steel frame and bed. The fabricator must also have exceptional welding skills. Additional information available to Applegate members in regards to dimensions, sizes and trailer capacity. | ||
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
MDF Cutting | 2 | The buyer is looking to source MDF cutting of the attached image. | Yes |
Machined Parts | 200 | The buyer is looking to source the following attachment to be machined in BS4659 or equivalent along with a heat treatment process. Full technical drawings are available to Applegate suppliers. | Yes |
Plastic Manufacturer | 500000 | The buyer is looking to source 1 meter plastic hollow sticks with a 1 cm diameter. | |
Centre Plates | 600 | The buyer is looking to source steel 45 grade centre plates. | Yes |
Railway Axles | 10 | The buyer is looking to source 10 x of the attached image. | Yes |
Aluminium Machining | 100 | The buyer is looking for a machinist to be able to machine 50 Aluminium units of the DET01 Cover, plain finish and a plastic manufacturer to produce 50 x units of the Base DET01 in a white plastic, can be Nylon or Derlin. Full information available to Applegate members. | Yes |
Bespoke Item Machining | 5 | The buyer is looking for a manufacture who can produce small quantities for bespoke items similar to chess pieces or poker chips made out of nickel or stainless steel to be plated in 24 Carat Gold and sold to high end clients. | |
Screen Printing | 30 | The buyer is looking to have lip gloss bottles screen printed with text. | |
Internal Garage Door Handle | 2 | The buyer is looking to have garage door handles machined in aluminium. A range of technical drawings are available to Applegate suppliers. | Yes |
Machined Parts Urgent | 40 | The buyer is looking into making several precision parts, mainly in aluminium. The buyer needs a total of 40 parts to be machined. 3D Files and technical drawings available for Applegate members. | Yes |
Acrylic Plastic CNC Cutting | The buyer is looking to have car badges custom produced by plastic CNC cutting. More information is available to Applegate suppliers. | Yes | |
Manipulating Arms | 5 | The buyer is looking to source manipulating arms to be made using aluminium 6061. Full technical drawings are available to Applegate suppliers. | Yes |
Aluminium Wheels | 6 | The buyer is looking to source aluminium wheels with tolerances of +/- 1mm, +/- 1°. Technical drawings are available to Applegate suppliers. | Yes |
CNC Machining | 200 | The buyer requires machining of the attached image. Full technical drawings are available to Applegate suppliers. | Yes |
Investment Casting | 1 | The buyer is looking for an investment caster to be able to produce the attached drawing. Full drawing available to Applegate members. | Yes |
Hobbing | 3 | The buyer requires hobbing and machining of the attached image. | Yes |
CNC Machining | 3 | The buyer requires quotes for hobbing and machining of the attached image. Full technical drawings available to Applegate members. | Yes |
CNC Machining | 6 | The buyer is looking to have 6 x machined as per the attached image. Full drawings are available to Applegate suppliers. | Yes |
Machining | The buyer has a requirement to machine inner and volute casing in both super duplex and carbon steel. More information and full technical drawings are available to Applegate suppliers. | Yes | |
CNC Turning | 1500 | The buyer has a CNC turning requirement to source the following: P142 in 42CrMoS4 material, P143-5 in ST-37 material, P143-6 in ST-37 material and P380 in brass. Full technical drawings are available to Applegate suppliers. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Small Caps | 100 | The buyer is looking to source 100 x small caps in black delrin with a slot. Full technical drawing available to Applegate suppliers. | Yes |
Linking Support Arms | 1 | The buyer is looking to source 1 x prototype to be manufactured from aluminium. Technical drawings are available to Applegate suppliers. | Yes |
Injection Moulding | The buyer is looking to recreate three different trays, a quantity of 5,000 of each. Images are able to Applegate suppliers. | Yes | |
Inserts for a Handbag Handle | 150 | The buyer requires inserts for a handbag handle that is covered with a leather substitute material. The initial quantity is 150 but this is an ongoing order. | Yes |
Stainless Steel Tube Machining | 4 | The buyer is looking for a machinist to create 4 of the attached units in Stainless Steel. Full drawings available for Applegate members. | Yes |
Front Plate | 4 | The buyer is looking for a manufacture to machine 4 of the attached front plate units. Full drawings available to Applegate members. | Yes |
CNC Machining of Front Stop Guide | 4 | The buyer is looking to source CNC machining of front stop guides. Full technical drawings are available to Applegate suppliers. | Yes |
Motorised Front Stop | 4 | The buyer requires CNC milling of motorised front stops. Full technical drawings are available to Applegate suppliers. | Yes |
CNC Milling of Bearing Block | 4 | The buyer is looking for a manufacture to CNC mill 4 of the attached bearing blocks. Full drawings available to Applegate members. | Yes |
Opto Finger | 4 | The buyer has a requirement for CNC milling of opto fingers. Full technical drawings are available to Applegate suppliers. | Yes |
Logo Cut | The buyer is looking to create their logo in 3D in gold foam or polystyrene. It will be suspended from above within a truss onto a rotator so that it spins. The logo is required to be 2 meters. More information is available to Applegate suppliers. | Yes | |
CNC Milling of Rear Bezel | 4 | The buyer requires a manufacture to CNC mill 4 of the attached Rear Bezels. Full drawings available to Applegate members. | Yes |
CNC Milling of Back Plates | 4 | The buyer is looking for a machinist to CNC mill 4 units of the attached Back Plate. Full drawings available to Applegate members. | Yes |
CNC Precision Machining | The buyer is looking for quotes for 500 and 100 pieces of each part to the drawing. A full technical drawing is available to Applegate suppliers. | Yes | |
Plastic Part Prototyping | 100 | The buyer is looking for 100 pieces of my prototype plastic part made. More information is available to Applegate suppliers along with a CAD model. | |
Tooling | The buyer is looking for quotes to have a tool made for CNC acetal moulding of their buckips. | Yes | |
Brass Cylinders with Thread | 400 | The buyer is looking to produce 400 x brass cylinders with thread and lid. The pendant will have a diffuser to be placed inside to be used for aromatherapy. The thread is M14 x 0.9 mm. Full specification is available to Applegate suppliers. | Yes |
CNC Machining Stainless Steel Ball | 100 | The buyer is looking a machinist to manufacture 50 and 100 pcs of each part to create a stainless steel ball. | Yes |
Solid Clear Acrylic Spheres | The buyer is looking for clear acrylic spheres in the sizes 10 cm, 20 cm and 30 cm. | Yes | |
NC 50 SUB and Box Manufacture | The buyer is looking for a quote to manufacture 1 off NC 50 Sub and 1 off NC 50 Box. Both to be about 12” long, LF2 material is acceptable for application. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
MDF Board Cutting | The buyer is looking for shaped cuts from a 15 mm moisture resistant 4 x 8 ft MDF board. More information is available to Applegate suppliers. | Yes | |
Headliner for P38 | 1 | The buyer is looking for a price to supply and replace headliner for P38 R reg with a sunroof. | |
Motor Face Plates Machining | The buyer is looking to machine 2 aluminium face plates to fit on a 14mm dia motor shaft. The plate depth is 8mm the overall depth including collar and face plate is to be no more than 30mm. Full measurements available. | Yes | |
Blow Moulding of Balls | The buyer is looking for a blow moulding company to help her create and install balls on building facades, estimated balls sizes would be 30mm up to 1 meter in diameter, volumes of the larger balls would be lower than the smaller ones. There are 3 different colours required, red, yellow & dark grey. | Yes | |
Deep Hole Drilling | 2 | The buyer is looking for 1 off Lid Plate and 1 off Base Plate. Deep hole drilling from free issue material | Yes |
Aluminium Extrusion | The buyer is looking for manufacturers of aluminium extrusion to make die as per their design along with extrusion profiles. The volume is above three tonne of Al6063 grade over next 2 months. Full technical drawings are available to Applegate suppliers. | Yes | |
Aluminium Machining | 200 | The buyer requires two parts to be machined from aluminium with a smooth outside finish. More information and full technical drawing available to Applegate suppliers. | Yes |
CNC Turning | 200 | The buyer requires prices of 50, 100 and 200 pieces of the attached drawing. Full technical drawing is available to Applegate suppliers. | Yes |
Zinc Coating Turning | 2500 | The buyer has an annual demand of 2,500 for the machined parts but requires quotes for 200, 400 and 800 including galvanised zinc coating. Full technical drawing is available to Applegate suppliers. | Yes |
Turning | 10 | The buyer has a requirement to source 10 of the attached drawing. Full technical drawing is available to Applegate suppliers. | Yes |
Stainless Steel Tubes | 20 | The buyer is looking to source stainless steel tubes with a 25 mm diameter, 90 mm long and modified with a 0.8 mm hole in the base reducing the length to 75 mm. | |
CNC Requirement | 1280 | The buyer is looking to source 1,280 parts of the attached drawing. Full technical drawing is available to Applegate suppliers. | Yes |
Machining | 100 | The buyer is looking to source 100 x components as per the technical drawing. | Yes |
Metal Engraved Menu Stands | 30 | The buyer has a requirement for menu stands, dimensions: 194mm x 92mm x 57mm. It is required to have a logo laser cut on one face allowing for a thin central slot to hold a card cocktail menu. More information is available to Applegate suppliers. | Yes |
Rust Resistant Coated Steel | 11 | The buyer is looking to source 11 pieces of rust resistant coated steel. Full technical drawing is available to Applegate suppliers. | Yes |
Water Filter Parts | The buyer is looking to source plastic tubes for their water filters. Quantity would be for the whole year. | Yes | |
Machining Magnetic Push Button | 1000 | The buyer requires machining of two parts, one in brass on a standard M3 thread and 4 mm down the shaft and one in stainless with an external thread of M12x1. | Yes |
Special Sprockets | 600 | The buyer has a requirement for made to order sprockets in four dimensions. The quantity is a minimum of 150 per dimension each year. Full technical drawings are available to Applegate suppliers. | Yes |
Solenoid Cups | 1100000 | The buyer is looking to source 1,100,000 per annum of brass, electroplated solenoid cups. Full technical drawings are available to Applegate suppliers. | Yes |
Heat Exchange Tubes | 9390 | The buyer is looking to source two types of heat exchange tubes, both have length of 4270 mm and thickness of 2.7 mm. Part numbers: ASTM A 213 T5 and ASTM A 179. | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Air Brake Silencer Material | The buyer requires an acoustic gasket that will fit inside a silencer that is attached onto an air break system. It requires to be the most cost effective solution due to the high quantities required. More information is available to Applegate suppliers. | Yes | |
Boring | The buyer has a requirement for boring with a solid diameter bar in EN24T. An example includes 180 mm O/D with a 2" bore. Full specification is available to Applegate suppliers. | ||
CNC Turning | 3000 | The buyer has a requirement for CNC turning for up to 3,000 pieces. Full technical drawing is available to Applegate suppliers. | Yes |
Embedded Electric Element Manufacturer | The buyer is looking for a manufacture of embedded electric elements in the UK. Their existing supplier is in France but they would now like a UK supplier. | ||
Air Brake Silencer Material | The buyer requires an acoustic gasket that will fit inside a silencer that is attached onto an air break system. It requires to be the most cost effective solution due to the high quantities required. More information is available to Applegate suppliers. | Yes | |
Boring | The buyer has a requirement for boring with a solid diameter bar in EN24T. An example includes 180 mm O/D with a 2" bore. Full specification is available to Applegate suppliers. | ||
CNC Turning | 3000 | The buyer has a requirement for CNC turning for up to 3,000 pieces. Full technical drawing is available to Applegate suppliers. | Yes |
Embedded Electric Element Manufacturer | The buyer is looking for a manufacture of embedded electric elements in the UK. Their existing supplier is in France but they would now like a UK supplier. | ||
Couplings | 150 | The buyer is looking to source 150 pieces per 15 months of the attached drawing. The full drawing is available to Applegate members. | Yes |
Steel Tapered Bars | 3 | The buyer requires 3 x steel tapered bars to be made from any steel material as long as it is purely aesthetic. Full technical drawings are available to Applegate suppliers. | Yes |
Control Knob Chrome Plating | The buyer has a moulded plastic part that will need chrome plating. The part is made from ABS at the moment but could be changed. | Yes | |
Slot Cutting | The buyer requires slots to be cut for 22 slats. Parts will be provided which are made from stainless 316. A 258 x 10 x 44 mm slot is required to be cut in the middle. More information and technical drawings are available to Applegate suppliers. | Yes | |
Zinc Die Casting | The buyer requires a small zinc die casting in batches of 10,000 as part of an ongoing production. More information is available to Applegate suppliers. | ||
CNC Machining | 1 | The buyer is looking to source one aluminium disk to be CNC machined. Full technical drawing available to Applegate members. | Yes |
CNC Turning | 4 | The buyer is looking to source initial prototyping of 4 pairs, but is wanting a quote for 100 pairs too. | Yes |
CNC Aluminium Tube Milling | 150 | We require A CNC Machine company that can take a 9.182 mtr length Aluminium Tube, 135mm od x 8mm wall, Drill, Tap, Countersunk & Counterbore holes.We have an immediate order for 142 tubes, aluminium would be free issue. | Yes |
Housing Machining | The buyer is looking for housing machining from a solid bar. Sandblasting and black anodising is required. Full technical drawings available to Applegate members. | Yes | |
CNC Turning & Milling | 30 | The buyer is looking to source 30 pieces of the attached drawing along with hardening. Full technical drawing available to Applegate members. | Yes |
Bespoke Heavy Duty Curtain | The buyer is looking to source a bespoke heavy duty curtain. More information and attachments available to Applegate members. | Yes | |
Chrome Replating | 1 | The buyer is looking to have their plastic item replated into chrome. Dimensions are 250mm x 120mm x 10mm. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Laser Cutting | Laser cutting of PlexiGlass including material.No silkography included. | Yes | |
CNC Turned Inserts | We require some Aluminum inserts to be turned We require:150 x Large inserts 450 x Side Inserts | Yes | |
EN1A Sawn Block | 26 | The buyer is looking to source EN1A unleaded rough sawn to size (100 x 55 x 50 mm). This will be ongoing once pilot run is proven to client. | |
PETG Thermoformed Trays | 410 | The buyer is looking to source 80 x 5 mm clear large PETG trays, 80 x 5 mm clear small PETG trays and 250 x microgreen 3 mm clear PETG trays. They will provide the tools and CNC machining of the holes and features. | Yes |
Machine Cast Bronze Support Strut | 1 | The buyer is looking for an AB2 strut to machine as per drawing and part is a raw casting. Full detailed drawing and SLDPRT file available upon request. | Yes |
CNC Turning and CNC Machining | 87425 | The buyer has a requirement for various components to be turned and machined. Full technical drawings available to Applegate members. | Yes |
Rack Pen CNC Machining Job | 700 | We have a buyer looking for 700 units to be CNC Machined out of Stainless Steel. Full technical drawings available for Applegate Members. | Yes |
Profilbolzen CNC Turning Job | 11800 | We have a buyer looking for 11,800 units to be CNC Turned. Full technical drawings available for Applegate Members. | Yes |
Pin Lever CNC Turning Job | 5000 | We have a buyer looking for 5,000 units to be CNC Turned, this is an on going annual quantity. Full technical drawings available for Applegate Members. | Yes |
Clamp CNC Milling Job | 5000 | The buyer is looking for 5,000 units to be CNC Milled, this is an on going yearly quantity. Full technical drawings available for Applegate Members. | Yes |
Pin Profile CNC Turning Job | 5000 | We have a buyer who requires a manufacturer to CNC turn 5,000 units, this is an on going yearly order. Full drawings available to Applegate Members. | Yes |
Spec Moer M3 CNC Milling Job | 10000 | The buyer is looking for 10,000 units to be CNC Milled, this is an on going yearly quantity. Full technical drawings available for Applegate members. | Yes |
Block CNC Machining Job | 800 | We have a buyer who requires 800 units to be machined out of Steel alloys, this is an on going annual quantity. Full technical drawings available for Applegate members. | Yes |
Ache Strong CNC Machining Job | 16250 | We have a buyer looking for 16,250 units to be machined out of Steel alloys. This is an on going yearly requirement. Full technical drawings available to Applegate members. | Yes |
Achse Kreuzkopf CNC Machining Job | 13500 | We have a buyer who requires 13500 units to be machined out of Steel Alloys, this is an on going yearly requirement. Full technical drawings available to Applegate members. | Yes |
Ache Light CNC Machining Job | 13750 | The buyer is looking for a manufacturer to machine 13750 units, this is an on going yearly requirement. Full drawings available to Applegate Members. | Yes |
Rotatieveer-As CNC Machining Job | 175 | We have a buyer who requires 175 units to be machined, this is an on going yearly requirement. Full technical drawings available to Applegate Members. | Yes |
20526 DMR296281 kettingwiel 35T | 1700 | Hobbing is required for 1700 units. Full drawings available to Applegate members. | Yes |
Clamping Profil CNC Machining Job | 2200 | We have a buyer who requires an annual quantity of 2200 units to be machined out of steel alloys. Full drawings available to Applegate members. | Yes |
Set Worm & Wormwiel CNC Machining Job | 200 | We have a buyer who requires an annual quantity of 200 units to be CNC Machined out of steel alloys. Full drawings available to Applegate members. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Rol CNC Turning Job | 1150 | We have a buyer who requires 1150 units to be CNC Turned. this is an annual quantity. Full drawings available to Applegate members. | Yes |
Casting | 4750 | The buyer requires various components to be casted for their annual requirement of 4,750 parts. Full technical drawings available to Applegate members. | Yes |
70mm Round Aluminium Sleeve | 10 | The buyer requires 10 x 70 mm round aluminium sleeves. Aluminium must be 6000 series. Standard machine finish, no post processing needed. More information and full technical drawings available to Applegate members. | Yes |
Stainless Steel Rod | 1 | The buyer requires a stainless steel rod to be CNC machined. Full technical drawing available to Applegate members. | Yes |
Electronics Engineering | The buyer is looking for an Electronics Engineering company to assist me with the Design, Build, Test and manufacture of some ideas. | ||
Aluminium Small Components | 4 | The buyer is looking to have 4 aluminium small components to be CNC machined. Tolerances go down to +/- 0,05 in some parts. Full technical drawings available to Applegate members. | Yes |
Stairs Fabrication | 1 | The buyer is looking to source fabrication of 2.5 m set of stairs for an outdoor canteen on site. | |
Machined Bar | The buyer is requiring a total of 500 machine turned bars every week for 14 weeks starting in January 2019. | Yes | |
Aluminium Plate | The buyer is looking for an aluminium plate to be fully processed, including drilling and countersinking holes. Full technical drawings available upon request. | Yes | |
Waffle Slab Moulds | 20 | The buyer is looking to source 20 x waffle slab moulds. | Yes |
Toughened and Laminated Glass | The buyer is looking to source 25.5 mm thick clear toughnened and laminated glass flat and curved. | Yes | |
Ring Bases | 10,000 | The buyer is looking for new Asian partners to supply ring bases with swivels (610 mm and 860 mm diameter). They require these to be supplied assembled packed in cartons of 5 sets. The current order is around 10,000 sets annually of the 860 mm version. Full specification available upon request. | Yes |
Injection Moulding | 5,000 | The buyer is looking to source quantities 1,500 / 2,000 / 3,000 / 5,000 of plastic locks to be injection moulded. Unit weight is 400 g and the material is 30%GFN. Injection tool will be supplied. | Yes |
Housing Prototypes | 2 | The buyer is looking for 2 x prototypes to be made out of Aluminium. The outside of the housing and the lid is to be light bead blasted and the TX cover V2 is to be left as it is with the edges broken. | Yes |
CNC Turning | 2 | The buyer requires CNC turning of mild steel mandrels / shafts. Full drawings available upon request. | Yes |
Suction Cup Holder Machining | The buyer requires 8 x machined brushes with drilling and tapping. | Yes | |
Tooling Company | The buyer is looking for a tooling company for foam manufacturer. The requirement is 2 x rectangular tools 450 mm x 450 mm x 12.5 mm with pegs for perforation. More information is available upon request. | ||
Stainless Steel Ring | The buyer is looking for a manufacturer of a Stainless Steel Ring in 318 Stainless | Yes | |
CNC Turning of 500 Inserts | 500 | The buyer is looking to source CNC turning of inserts from either aluminium, brass or mild steel. Tolerances are very open at this point with the square hole to be broached to +-0.1mm. STEP file available upon request. | Yes |
Stainless Steel Rod | 2 | The buyer is looking to source either one or two stainless steel rods. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Rod CNC Machining | 1 | The buyer is looking to source either one or two 174.9 mm aluminium steel rods. | Yes |
CNC Cutting | 200 | The buyer is looking to source 2 x 6 mm clear polycarborbonate with 4 round edges on one, and 2 round edges on the other. They will have a 6.5 mm drill hole. Full specification available upon request. | Yes |
Steel Cutting Bars | 2 | The buyer is looking for two steel cutting bars approximately 3mm x 3mm square cross-section, one 22mm long and one 32mm long in cobalt steel. | |
Plastic Balls | The buyer is looking to manufacture a plastic balls similar to a golf ball for training purposes. Dimensions are uncertain at this time but approximately 2. 26 inches and 45. 9g. More information is available upon request. | ||
Plastic/Rubber Tooling | The buyer is looking to source tooling and production in plastic, recycled plastic and rubber. The product is a hosepipe bucket clamp/clip in various sizes. | Yes | |
Aluminium CNC Machining | 100 | The buyer is looking to source CNC machining of A201772 Stand-Up shade REV C. Quantity is around 50/100 parts. The part has got a 10. 7mm bore crossing the diameter at the top, it's 66mm deep, that could be shortened supplier requirement. All holes marked 2. 5mm should be tapped to M3. | |
Machining of Aluminium Components | 300 | The buyer is looking to source CNC machining of aluminium components and the supply of the material. This is an initiall order with an ongoing requirement. | Yes |
Machined Mild Steel Bushes | 200 | The buyer requires 2 variations of machined bushes in either aluminium or mild steel. 100 of each variation required | Yes |
Fabrication Work | 0 | The buyer is looking for a container conversion, someone to cut wholes in them for windows, doors etc. There are two 40ft containers that requires one side each removing to form an open 16ft X 40ft. More information available upon request. | |
Machining Punch Holders | 0 | The buyer is looking for a machinist to manufacture 3 different parts of different quantities, for example 8 x End Punch, all parts need to be manufactured from a P2O material. | Yes |
Machining | 0 | The buyer is looking for a machinist to manufacture 5 individual units of different quantities, for example 4 x Cylinder boss in Mild Steel (Chemical Black). | Yes |
Machining | 0 | The buyer is looking for 5 different units of individual quantities, for example 4 of double stroke cylinder bottom plate in mild steel. | Yes |
Machining | 0 | The buyer is looking for a machinist to manufacture a series of 13 units out of aluminium. | Yes |
Aluminium Worktable Jig Plates | 0 | The buyer requires 3 aluminium parts to be machined. The aluminium plates cut to size are to be provided by the buyer. The fixture plates are to fitted on the CNC fixing plate cut-out. More information available upon request along with detailed drawings. | Yes |
CNC Turning / Milling | 0 | The buyer is looking turning and milling. Top part needs to be m/s. Two other turned parts can be priced for both mild and 304 or similar. +/- .12mm. | Yes |
Stainless Lug | 0 | The buyer requires a 316 stainless steel lug 28mm long and 25.0mm in diameter with 1 mm 45 degree chamfer both ends. | Yes |
12SWS4017 Nylon Shoulder Washers | 500 | The buyer is looking for nylon shoulder washers. Dimensions: MAJOR OD-40mm/1.570in - MINOR OD-27mm/1.055in - ID-22.7mm/0.887in - HEAD THICKNESS-4.5mm/0.175in - LENGTH-4mm/0.170in | Yes |
Manufacturer of Cake Tins | 5000 | The buyer is looking for 5,000 cake tins to be manufactured. More information and sizing available upon request. | |
Sofas & Chairs | 0 | The buyer is looking for a supplier who can make a bespoke sofa. CAD drawing available upon request. | Yes |
Shim Variants | 0 | The buyer is looking for the manufacturer of shims, quantities and thicknesses as specified on the drawings that will be provided. Material is stainless steel and the lowest sheet thickness is 0.025mm. | Yes |
CNC Turning | 0 | The buyer requires CNC Turning. . Material 6082-T6. Inner faces at 72mm and 42mm diameter are for press-fit bearings. Spline +0/-.1. All other dims +/- 0.2mm. Thread is M50x1.0. Full drawing available upon request | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
3,000 Wooden Sticks | 0 | The buyer is looking for 30cm wooden sticks with a diameter of 1.5cm with round edges. | |
Name Tags | 0 | The buyer is looking for the manufacturer of 500 metal name tags with a pin on the back. Logo to be etched on one side. | Yes |
3,000 Sponges | 0 | The buyer is looking for a quantity of 3,000 sponges cone shaped, 6cm height and 6cm diameter. | |
Black Nylon CNC Machining | 240 | Wanting some parts to be CNC machined from black nylon 6 or a comparable black plastic. A total of 240 pieces needed with 160 target plates and 80 mounting blocks. | Yes |
Jig CNC Milling | Wanting the CNC milling of a jig in the material aluminium 6082 as per technical drawings. | Yes | |
Custom Table Tops | 4 | Requesting 4 custom table tops with all being 25mm MFC with ABS Edge in different colours and sizes. | |
CNC Turning | 10 | Manufacture parts complete to drawing, ideally these should be made from a laser cut ring nested into a sheet to reduce costs. Needing prices for 2, 6 and 10. | Yes |
Laser Cutting | 20 | Laser cutting of stainless steel required for creation of an exhaust bracket. EMS files available on request | Yes |
Wooden Stool Production | Looking to produce a wooden stool, in either Ash (or similar) or Plywood. It is a low volume production (5 to 10 units) for a product launch. Simple design and all planar surfaces, no lathe or extreme joinery techniques needed. | Yes | |
Ceiling Light Manufacturer | Looking to develop new products using different materials. Currently we are developing a ceiling light, needing 20 cone-shaped products made, out of agglomerated cork. Technical drawings available on request | Yes | |
Fastener Machining | 2 | Shoulder bolts in either 2024 or 7074 aluminium. Technical drawings available on request | Yes |
Grinding of aluminium | I want to grind an aluminium surface to achieve a flatness of 2.5 | Yes | |
Name Tag Manufacturer | 300 | A metal name tag which would be machined from stainless steel. Logo to be etched on one half. | Yes |
Metal Mount | Prices required for a single part for a 3D printer, this will need to be machined from metal but does not need to be good quality. Technical drawings available upon request. | Yes | |
Central Access Steelwork | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Central Access Steelwork. | Yes | |
Spiral Access Platform | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Spiral Access Platform. | Yes | |
Spiral Support Steelwork | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Spiral Support Steelwork. | Yes | |
Jig Access Platform | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Jig Access Platform. | Yes | |
Jig Support Steelwork | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Jig Support Steelwork. | Yes | |
IBC Locating Angles | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some IBC Locating Angles. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Spiral Sample Box Support | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Spiral Sample Box Support. | Yes | |
Mounting Plates Containers | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Mounting Plates Container. | Yes | |
Container Walkway Supporting Plates | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Container Walkway Supporting Plates. | Yes | |
Ore Sorter Chute drawing | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Ore Sorter Chute drawing. | Yes | |
IBC Inlet hopper drawing | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some IBC Inlet hopper drawing. | Yes | |
Shaking Table Outlet Launder | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Shaking Table Outlet Launder. | Yes | |
Micro Jig Outlet Launder | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Micro Jig Outlet Launder. | Yes | |
Ore Sorter Ladder & Handrail | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Ore Sorter Ladder & Handrail. | Yes | |
Screen Launder | A buyer is building a modular, mobile, containerised mineral processing plant. There are some components of the build need to be fabricated with a standard paint finish. We are interested in competitive pricing and timelines for some Screen Launder. | Yes | |
Jensen Healey Crank Pulley | 1 | Needing quotes for a custom crank pulley required to allow the fitment of power steering to a Jensen Healey. Must be machined from a ferrous metal, preferably mild steel. | Yes |
Tube Laser Cutting | Business required for some tube laser cutting for custom aluminium extrusion. Full information and drawings available upon request. | Yes | |
CNC Milling | Needing the CNC milling of a single part; to be milled from aluminium with light lead blasting on the outside. | Yes | |
Plastic Foldover Trays | 100000 | Looking at quantities of 100,000 plastic fold over trays measuring 18cm length x 12cm width x 4cm depth with the lid attached. Will need 2 compartments in these trays with one larger than the other. | Yes |
Guitar Knobs | 60 | Looking for 60 pieces, made from aluminium. It will not have to be exact to a requirement but will need to be similar in style/look. | Yes |
Aluminium Handlebar Clamps | 10 | Will be needing quotes for 10 pairs. Material is 6082 T6 but similar materials considered. Part is welded after machining. | Yes |
Forging/Casting Items | 12000 | Large request for the forging/casting of 5 different pieces with the total quantity being 12,000. Materials vary with more information available upon request. | Yes |
CNC Turning | Needing a business to CNC turn a total of 12 different forged bushes with the material grade being EN8 D. | Yes | |
Tube Laser Cutting | 100 | We are looking for a business to laser cut some 26.9mm diameter metal tubing with each part to be bright zinc plated. | Yes |
CNC Machining of a Disk | CNC machining of a aluminium disk needed as a one off. Technical drawing available upon request. | Yes | |
Aluminium Caps | 25 | Wanting a prototype initially for some aluminium caps with the quantity after for 25 pieces at a time | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
CNC Machining | Wanting a range of pieces to be CNC machined with prices for 1 set and 5 sets of these pieces | Yes | |
CNC Machined Head | 500 | Prices required for 500 aluminium heads to be machined. The price must include 4 prototypes | Yes |
Aluminium sheet laser cut | Cut from 2mm aluminium sheets. Shape around 2400x1300mm with several 6mm holes cut at 40mm apart. Drawings available on request. | ||
60ml bottles | 20000 | Supplier of 60ml bottles with dripper and lid. Supplier ideally from China or Europe. Image available to show type of bottle required. | Yes |
Retainer Collar(s) | Require retainer collar to be machined out of aluminium. Initial order is for 4 to be made as a prototype with further batch orders to 500. | Yes | |
Solar PV Farm Civil Works | Requiring budget costs for the piling and associated civil works concerned with establishing a Solar PV farm in Southern Scotland. | ||
Circular Lock Nuts | 50 | m22 x 1.5mm threaded circular lock nut - Made or supplied | Yes |
Prototypes | 1 | small mechanical unit made of metal the other a unique plastic cap | |
Jig Access Platform | 1 | please see attached technical specifications and drawings | Yes |
Jig Support Steelwork | 1 | please see attached technical specifications and drawings | Yes |
IBC Locating Angles | 1 | please see attached technical specifications and drawings | Yes |
Access Between Containers | 1 | please see attached technical specifications and drawings | Yes |
Spiral Access Platform | 1 | please see attached technical specifications and drawings | Yes |
Laser Cutting | 200 | need the sleeve on the start cap, I have some bushes | Yes |
Reverse Engineering | 1 | scan a metallic part, capture as a 3D model and produce metallic parts | |
Watch Case | 1,000 | stainless steel with a matte finish | Yes |
Threaded Bar | 1,000 | Please see drawing attached | Yes |
Insert | 1,000 | Please see drawing attached | Yes |
Laser Cut Acrylic Panels | 1 | laser cut 5mm thick, 200 x 140 mm panels, 2 holes of 9mm centre | |
CNC Turning | 2 | Injector Blank | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
CNC Turning | 1 | Muzzle Flash | Yes |
Watch Clasp | 1 | Attached is the production drawings for the watch clasp | Yes |
Forming Mould For Prototype | 1 | To be used as mould for pressing copper sheet | Yes |
Cable Assembly | 1 | (LSOH) LMR-240 SMA Straight (Male) to SMA Right Angle (Male) with heat shrink wraps | |
5 Axis Machining | 100 | need the holes on the 340 PCD and the detail at grid ref E4 laser cutting | Yes |
Money Tin & Sensor | 90,000 | manufacture bespoke plastic counting lids for our money bottles | Yes |
Threaded Dowel | 30 | These will be used for an XDAS test gear and will need to be made from aluminium. | Yes |
I-beam Plates | 370 | These will need to be made from aluminium preferably but steel will be considered. | Yes |
Tapered Cap End | 500 | It needs to be made from plastic that has resistance to oil and cleaning products. 50% of these will need to be in black with the remainding 50% in red or white. | Yes |
Spoke Calculator Ruler | 50 | Initial order of 50, anodised in various colours. Part to be machined in Aluminium 6061 (other materials are okay). | Yes |
Welded Swan Neck | 50, 100, 200 and 500 | 4 aluminium tubes to be cut and welded together from 20mm OD tubes. | Yes |
Anodised Parts | 20 | Needing a total of 20 parts to be manufactured from aluminium and to be black anodised. | Yes |
Juliet Balcony | 1 | Juliet balcony to be manufactured; it will need to be 3m wide, made of steel with no glass and nothing fancy. This request is just for a single balcony but could potentially increase in the future. | Yes |
Aluminium Tube Machining | 100, 200, 500 and 1,000 | Need to be cut to length, groove machined on the inside and with a hole drilled and tapped on the side. The length of the tube is 109mm. | Yes |
Cord Grip Adaptors | 100, 200 and 500 | This request is to have quantities of 100, 200 and 500 cord grip adaptors to be machined. These will need to be made from brass. | Yes |
Machining | 200 | 2 different parts machined at quantities of 100 per part. This could become a more regular order if the price and quantity is right. | Yes |
Round M10 Bushes | 200, 500 and 1,000 | We are looking for quotes for these in quantities of 200/500/1000. Possibly 15mm & 16mm OD, looking for whichever one is cheaper, if same price 15mm is better but 16mm could be made from standard bar so may save a turning process. | |
Rivets | 500 | This request is for 500 book rivets. These will need to be 8mm tall, nickel plated and with a screw off head. | |
Silicone O-Ring | 2,000, 5,000 & 9,000 | Large amount of O-Ring SS-V2-0013, the quantities required are 2,000, 5,000 & 9,000 with this increasing to as many as 100,000 by 2020 if the price and quality is there. | Yes |
Flanges | 60 | We have a request for 6 different flanges requiring 10 of each. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Laser Profiles | 12 | We are looking for quotes for a range of different products to be laser profiled. There are 5 different products with different quantities, but all must be of good quality. | Yes |
Injection Moulding | 10,000 | Looking for injection moulding or vacuum casting of food grade material polypropylene measuring 410mm x 340mm. | Yes |
Plastic Chrome Plating | 10-50 | This request is to have the shroud chrome plated. The shroud is 3mm thick with between and 10 and 50. | |
Steel Profiles | 5 or 10 | Looking for prices for five and ten 40mm mild steel profiles. We would require these to be either flame cut or plasma cut. | Yes |
Silicone Sealing Gasket | 1,800,000 | Extremely large request for a total of 1,800,000 silicone sealing gaskets. These will need to be made using silicone rubber. | |
Injection Moulding | Injection moulding of a drip tray for a slush machine. Quantities have not been confirmed but will become apparent in the near future. | Yes | |
Laser Cutting | 36 | We have a request for laser cutting services for 36 parts from 5mm mild steel. | Yes |
Tooling | 10 pieces in total | We are looking for quotes for 10 different parts. The requirement is for 8 Safety Plates and 2 Sealing Blocks. | Yes |
Bevel Gears | 2 sets | We are looking bevel gears. The sizes for these gears are approximately: 120mm (bottom) 90mm (top) 50mm bore (splined) and 130mm (bottom) 95mm (top) 46mm (bore), we will require 2 sets | Yes |
Injection Moulding | 2,000 | We have an injection moulding request for some polystyrene boxes. The request is for: A cube style open box with internal dimensions of 265mm with 17-20mm sides and 25-30mm bottom and Rectangular tray with internal dimensions of 225mm x 450mm x 100mm high | |
Union Nuts | 1,000,000 | This is a very large request for union nuts. | Yes |
Sleeve Bushing | 20,000 | This is a large request for a total of 20,000 sleeve bushings. | Yes |
Injection Moulding | Manufacturer to injection mould a product that is currently in the prototyping stage. The product will need to be suitable for Biomed, Aerospace and Catering industries. | Yes | |
CNC Machining | 19,475 pieces in total | CNC milling and turning of 2 different products. The quantities for these products are 975 for the one and 18,500 for the other. | Yes |
Stainless Steel Bracket | 1,000 | This request is for some sheet stainless steel fabrication. The thickness is 1.5mm and will need to be completed as per the technical drawing | Yes |
Machine Components | 36 pieces in total | We are looking for some machined components to be manufactured from 304 stainless steel. The requirement is for a total of 36 parts: 12 x Rollers, 12 x 226mm Pins, 12 x 205mm Pins | Yes |
CNC Machining | 150 | We are looking for quotes for the CNC machining. The material is EN850 and the requirement is for 150. | Yes |
Bolt & Nynut | 260,000 parts in total | Looking for Metric Galvanised Bolts and Metric Nynut. Bolt must conform to BS 3692 Grade 8.8. Nut to have an oversized tap of 0.4mm after galvanising M10x1.5 thread form to BS3643 part 2 class 6H. both parts to be hot dipped galvanised and centrifuged to BS EX ISO 1461 | Yes |
Metal Inserts | 6,440,800 | We have a very large yearly request for 7 metal inserts parts. The application is window regulator parts for the automotive industry and volumes are per year | Yes |
Rubber Mat Production | We are looking for some rubber mats to be produced. These will need to roughly measure 3cm thick, 65cm width and 85cm length. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Pigeon Hole Racking | We are looking for some large pigeon hole racking. This will be to need to be fabricated with a material that will be agreed by the buyer. | Yes | |
Housing Prototypes | 10 | We need quotation for 5 of and 10 of prototype batches and also for 1000 per year production batch. The material we are looking for is a grey cast iron and the application is a hydraulic motor. | Yes |
Machined Brass Rods | We are looking for a single rod to be machined in brass to our specification. This will be used as a musical instrument. | Yes | |
CNC Turning | We are looking for suppliers to provide quotes to CNC turn 2 different prototype parts. Full information available upon request. | Yes | |
Manhole Ladders | We are looking for a quote for manhole ladders. These will need to be manufactured and installed into surface water manholes. | Yes | |
Q-Rail and Glass | We are looking for a supplier to provide a quote for glass profiles. There are 2 staircases and 11 panels within. | Yes | |
Custom Stamping Part | 5,000 | We are looking for a manufacturer to make a custom stamping part | Yes |
'Manmower' Device | 500 | This is a large requirement of 100 units of a ‘Manmower’ device which is split into seperate 5 parts per unit. | |
Non-slip Tray | We are looking for the 3D printing of a non-slip tray. It must be made of a strong and durable material and the surface must be as non-slip as possible. | ||
Fabricated Part | We need a single glass reinforced handlay phenolic part to be fabricated to the technical drawing attached. This will need to be fabricated in glass reinforced plastic, but an alternative would be considered. | Yes | |
Stainless Steel Posts | 45 | Each post to have four 13mm holes drilled into them. | Yes |
Aluminium Parts | 1 | We need 2 parts to be made from aluminium. For both parts the thread hole needs to be a G1 tapped screw hole. | Yes |
CNC Manufacturing | Part to be CNC manufactured using an aluminium alloy material. At this stage it will be a single quantity. | Yes | |
CNC Routing & Printing | Routing and printing for a pinball machine as shown partly on the attached images. This is a single requirement at this stage but could become a regular order of multiples. | ||
CNC Manufacturing | We need a part to be CNC manufactured using an aluminium alloy material. At this stage it will be a single quantity. | Yes | |
CNC Milling | CNC routing business that can cut out some 3D shapes from a solid piece of walnut. Size of the cut out would be roughly: Height: 100mm, width: 400mm, length: 400mm. | Yes | |
CNC Manufacturing | We are looking for a part to be CNC machined out of aluminium. | Yes | |
Brass Rods Machined | The blocks are made separately; the total length is 336 mm. Accuracy is not important. The width needs to be between 3.4mm and 3.6mm. | Yes | |
Box Manufacturing | We are looking for the quotation of the manufacture of a box. This will need to be durable but also lightweight to contain office/desk equipment such as laptop, staple, hole punch etc. | ||
CNC Machining | We are needing a request for a brass plate to be CNC machined, this will be used for the jig in PCB manufacture. | Yes | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
CNC Machining | 100 | We are looking for some CNC machining | Yes |
Injection Moulding | Box casing to be injection moulded. | Yes | |
Plastic Manufacturing | Plastic manufacturing for 2 different types of gauges, one internal and one external. | Yes | |
Plastic Machining | 12 | 12 units to be made from a hard-wearing plastic but must be black, grey or white. | |
Hex Blower | 1,000 | Need to be black anodised. | Yes |
Plywood CNC Cutting | 10 | Bluetooth speakers to be CNC cut as kits for kids to build and play with. As we are a start-up we would only require a quantity of 10 units. | Yes |
Puddle Flanges | 4 pairs | We are looking for the quote for puddle flanges to be manufactured in cast iron. We require a total of 4 pairs for each size. | Yes |
CNC Machining | CNC machinist to be able to have regular work. The product we need to have machined is a lightsabre and the part is in 3 parts; the screw on blade holder, the main body and the screw on pommel so both ends of the main body will need to be threaded. | Yes | |
CNC Milling Acetal | CNC milled in Acetal or Delrin. This is a requirement for a single product but could turn into a more regular order in the future. | Yes | |
CNC Machining of Furniture | 10 | Number of pieces of furniture that are cut on a CNC machine and can be assembled & built without the need for further fixings. | Yes |
CNC Machining | 500 | Looking for quotes for around 500 of each part, most items would generally be ordered from around 500 - 1000 per item and required on a regular basis throughout the year dependent upon usage. | Yes |
CNC Machining | 30 | We are looking for a price to manufacture 30 x plates to be made from 316L stainless steel. | Yes |
Filter Regulator and Lubricator | 1 | Modulair 160, Fluid: Compressed air or neutral gas. Ports: G 3/4 TO G 1-1/2. Series 342 Filters- Regulator - Lubricators Metal Bowl. Automatic Drain with Visualization. Pressure 0-16 Bar with pressure Gauge D=50, G 1 1/2. P/N 34207332 | Yes |
Machining | 4 | Supplier capable of machining 4 C Brackets from supplied billets of Titanium Grade 5 complete with drilled / tapped M10 holes. To machine the free-issue bar, bend and weld if required to ‘image 1’ | Yes |
CNC Contract Machinist Required | 30,000 per year | CNC contract machinist to machine components from our free issue grade 2011 or 2030 free machining aluminium alloy. The raw material will be supplied as an aluminium extrusion 41 MM x 20 MM in 4000 MM lengths. | Yes |
2 Axis Milling | 9 | 2-axis milling quote to produce items out of mild steel S355 dimensions 605 x 260 x 40 mm. Machining requirement is to machine 2+2 sides to final dimensions 600 x 260 x 35. Also, there are 2+2 holes to be drilled. | Yes |
Pivot Block | 50 | We require 50 x SXQ5 Pivot Block to be manufactured from 6082 aluminium material with the potential of a larger order in the future. | Yes |
Secondary Tube Settler | 1 | Single secondary tube settler manufactured to our technical drawing. | Yes |
Magnet Cleaner Bar | 1 | Single Magnet Cleaner Bar to be made from mild steel. | Yes |
Hood Chock LH | 1 | Single Hood Chock LH to be made from Nylon 6/6 (White). | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Conveyor Datum Plate Die 2080 | Conveyor datum plate die 2080 to be made from mild steel and nitride hardened. | Yes | |
C1 Turntable Tooling Die | 72 | Looking for a quote for three different parts: Turntable Tooling Die x 8 – made from Gauge Plate with a natural finish, M6 x 12 Hexagon Socket Head Cap Screw x 48 – made from silver steel and to be hardened and tempered to 58-60RC, M5 x 12 Hexagon Socket Head Cap Screw x 16 – made from silver steel and to be hardened and tempered to 58-60RC | Yes |
7mm & 8mm Location Pins | Location pins to be manufactured from D2 and to be hardened and tempered. Also some 7mm and 8mm engraved to differentiate between the two pins. | Yes | |
Aluminium or Acetal Components | 1,000 | We are looking for a quote for the price of 100 and 1,000 parts made in acetal and aluminium. This could become a yearly order of 5,000 parts. Critical tolerance on the 5.9mm diameter of +0, -0.1 and all other tolerances being +/- 0.1. | Yes |
CNC Service | We are looking for a quote for “fins" that we need folding up. The material is 1.5mm thick stainless steel 1690mm long and 242mm wide. We would need these reverse rebated / V-groove milled in two places all the way down the length to allow us to fold up. | Yes | |
Fabrication of Stand | 350 | Fabrication of a moses basket stand. This would be made from wood and would need plastic retaining straps to be provided to enable safety and stability when the basket is on the stand. 350 as an initial order but could become a regular purchase. | |
Roof Rack Fabrication | 5 | Looking for a quote for the fabrication of 5 identical roof racks, the requirements are: Mild Steel in Powder Coated Matte Black | Yes |
CNC Turning | 120 | Looking for a quote for 30 sets of 4 products | Yes |
Gear shaping | Looking for a quote for prototypes of external spur gears, could potentially become monthly orders. | Yes | |
Securitainers | 2,000 | Securitainers - 49mm x 95.5 (180cc) with pull tab lid. | Yes |
Machining | 14 in total | Metal Parts : 1 x LC 12 Retaining Ring Removal Tool - Polypropylene PP Parts : 6 x LC 12 Retaining Ring - Acrylic Parts : 1 x LC 12 Consumable Test Plate, 6 x LC 12 Consumable Flower Insert | |
Metal Machining | 900 | 100 of 9 differnet parts of a mini vehicle in a commode wheel chair. Parts made in AISI 4118, aluminium 6061 and Stainless steel 316L | Yes |
Bike Casting Parts | 3 | Looking for tools for aluminium casting of bike parts with elements.looking for Seat Stay, Main Frame and Chain Stay Tool Assemblies | Yes |
Stainless Steel Machining | 8,000 | Flaps required, machined from Stainless Steel 316. | Yes |
CNC Routing | CNC routing from cut sheet from 12mm Spruce/Softwood Plywood | Yes | |
Aluminium Machining | 8 | Differnet pieces machined out of aluminium or another suitable material. The purpose of these pieces are to use them as masters in producing silicone moulds, the main requirement is that the exterior surface is smooth enough to not impart tool marks to the moulds. The only detail on the pieces is a small brand mark in the lower section: | Yes |
Motor Coupling | I require a motor coupling with a tapered bore. I have a drawing in AutoCad 2007 in 2D. | Yes | |
Bracket Fabrication | 160 | Flexible on thicknesses, we can adjust it to take standard timber lengths. Either from standard brackets by sourcing them and/ or fabricating them from a drawing/ finalised design by ourselves. | Yes |
Eutectic Bonding Setup | 13 | The material is a mix of oxygen free high conductivity copper (OFHC). and stainless steel 304 | Yes |
Machining of Mild Steel | 5 | I need a price for machining 5 off mild steel bearing housings. The steel blanks are 300mm diameter x 362 mm long Mild steel (200Kg each). | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Manufacture of Piston | 40 | 4 components which when assembled make a complete piston; I'm looking for an optimum 10 pistons. Ongoing supply if it proves workable. | Yes |
Water Treatment | 36 | This is a water treatment program and need so fast offers for all. Project need to start ASAP. | Yes |
Clock Parts | Fabricate a small series (50 samples) of my clock. The clock consists of multiple parts, which can be easily assembled. I've optimised the design for FDM-printing | Yes | |
Spare Parts | 6 pairs | Looking for some spare feed bars, left and right handed | Yes |
CNC Maching | Prototype of 5 units required within 7-10 days then will then have 200 units in Delrin for first production run. Media blasted or satin finish required on final production run units | Yes | |
Aluminium Milling | Mnufacturing the two pieces. They can be seen in two different configurations: Upper Part and Lower Part | Yes | |
Aluminium Spare Parts | 10 | Looking for several differnet parts machined out of aluminium. | Yes |
CNC Quote | Injection moulded parts are to be produced in an 040 Opal Acrylic or something similarly translucent. The part is a light difuser and it's intended that the face will have a matte finish - is this something that you could do also? | Yes | |
Stainless Steel CNC Machining | 100 | CNC machining of that component in stainless steel or steel, aluminum 7075 (ergal) and if possible in titanium. | Yes |
MDF Machining | 100 | The board is an element of a game, and I will fit in some plastic things in the holes in the board. | |
Machining and Anodising | I require a quote for 20 off & 50 off, this will be on going job, frequency of parts required to be confirmed. | Yes | |
Wash Bay | Equipment to be washed can weigh up to 8000KG | Yes | |
Aluminium Parts | We require these to be made from aluminium, open to any process that can produce them as required | Yes | |
Vortex Flow Meter Components | 300 | 3 parts and we require 100 of each made in different grades of Aluminium, steel and plastics. Needs a smooth( 6.3µm) finish. Tolerance standard: DIN standards. | Yes |
Solenoid and Timer Control | 11 | Solenoid Valve - the voltage is 24 DC | Yes |
100 KW Gearbox | 108 | Parts for 100KW Gearboxs | Yes |
Mechanical Components | 41 | 7 parts to be produced. Roughness on parts have to be 1.6 Tolerance with dimension who do not have indication have to be according the standard ISO 2768-1 classes “m”. | Yes |
Components | 350 | 7 parts to be produced. Roughness on parts have to be 1.6 Tolerance with dimension who do not have indication have to be according the standard ISO 2768-1 classes “m”. | Yes |
Ring Nuts and Spacers | 58 | 7 parts to be produced. Roughness on parts have to be 1.6 Tolerance with dimension who do not have indication have to be according the standard ISO 2768-1 classes “m”. | Yes |
Ring Nuts and Spacers | 5 | Roughness on parts have to be 1.6. Tolerance with dimension who do not have idication have to be according the standard ISO 2768-1 classe “m” | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Spacers | 4 | Roughness on parts have to be 1.6. Tolerance with dimension who do not have idication have to be according the standard ISO 2768-1 classe “m” | Yes |
MDF Machining | I have a small project which requires some parts to be cut out of 6 mm thick MDF. | Yes | |
CNC Milling | 5 axis CNC milling in order to produce a billet charge pipe (automotive application) using 6061 aluminium. Part to operate from +2.5 bar to -2.5 bar and temperature range from 30 to 80C. | Yes | |
Water Bottle Holder | 5 | Simple part to be cut out. It needs to be made out of the cheapest titanium that you have. The grade of titanium does not matter to me just the price. | Yes |
Machining Parts | 48 per month | This is a core part of an automation machine we produce. Currently, we machine this part out of 5083 20mm thick aluminium. | Yes |
MDF Machining | I would like to produce the attached kids' desk to sell to the public. I'd be after 10mm MDF, I'd like to have quotes for a painted finish and without. | ||
Anti-Skateboard Strips | 134 | 304 Stainless Steel, Satin Finish, Anti-Skateboard Strips. 316 Stainless Steel as an option and what the difference in prices would be if we were to Blast and Machine Edge ourselves. | Yes |
Wood CNC Machining | Machining company to machine a series of 8 panels for our Arcade Bar Top Machine frame with CAM and Dowel fittings and a T-moulding groove. Volumes would be a minimum of 480/year for this model, plus another minimum of 250 for our other panels. | Yes | |
Nylon Gears | 1,200 | Looking for 100 each of 12 differnet Nylon gears. Sizes required: 16 x 0.5 diam, 26 x 0.5 diam, 27 x 0.5 diam, 28 x 0.5 diam, 50 x 0.5 diam, 55 x 0.5 diam, 58 x 0.5 diam, 103 x 0.5 diam, 94 x 0.5 diam, 89 x 0.5 diam, 87 x 0.5 diam, 100 x 65 x 0.5 diam | Yes |
Globe Machining | Need a globe to be Cnc, 1200 diameter, and 3 smaller ones at 400mm diameter in timber or possibly in chemical wood. | ||
Aluminium Sheet Laser Cut | 500 | Need a quote for 3mm aluminium sheet laser or waterjet cut edges must be clean with no burrs in the below quantities. | Yes |
CNC Wood Machining | Company with capability of cutting precision hardwood beams of between 1 & 6m in length (More if possible). | Yes | |
Fastener | 200 | ENZ4 hardened and has an m8 thread. Required multiple times throughout the year. Used on the end of a rod to push sweets in a sweet manufacturing plant | |
Filter Frame | Custom made filter for water, needs to be a factory that is able to produce 100k pcs frames made of PP material. For reference, the Top Frame is Approximately 218.0 mm x 191.5 mm x 20.0 mm. The Bottom Frame is Approximately 206.0 mm x 170.5 mm x 17.5 mm. | Yes | |
Bed Support Product Manufacture | 1 | Price to get model made as I have 3d printed it 3 times now in different materials but they have all warped. | Yes |
Aluminium Profiled Ring | 35 | Aluminium 6082T6 Profiled Ring. We require this to be produced from plate. | Yes |
Steel Plates | 500 in total | 2 both parts in Mild Steel, doesn’t need to be really strong and they will be powder coated so I guess a reasonably low grade will be fine. Inital order | |
CNC Requirement | Manufacturer that could produce CNC bamboo items. The product is 205mm high and 80mm diameter. | ||
CNC Cut Polycarbonate | I'm looking to get quotes for the two parts to be CNC cut from polycarbonate. I'd like one set cut initially so that I can test it out but if it works I'll likely order a larger amount. | Yes | |
Parts for Turning | 400 sets | Looking for 2 different pieces to be produced PULL CAP - KCP-003 Material: NATURAL ACETAL Pand ENRICHNER NUT - KCP-002 303 STAINLESS | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Component Manufacturing | 35 | Looking for several parts manufacturing, can supply technical drawings for all parts required. 11 x chain blade, 22 x chain link 6 and 2 x sprocket 3 | Yes |
Metal Bracket | 300 | To be manufactured out of 1-2mm thickness steel sheet but open to other option for material and thickness. I have designed to be laser-cut or water-jet cut but again open to options. Bracket designed to clip on to WiFi router. | Yes |
Light Fittings Machined | Machine some pendant light fittings. There is a top and bottom part threaded together which can be opened to change the small led capsule bulb. My glass part is resin bonded to the bottom part. | ||
Solenoid Valve | ASCO Solenoid Valve - Type: EV8327G042 | ||
Volume Flow Controller | 100 | Looking to get a volume flow controller manufactured. | Yes |
Carbon fibre plate machined | 25 sets | Two pieces in carbon fibre plate 1.5mm thick. | Yes |
Metal Casting | 30 | Paperweights from a round 3D shape with diameter 10cms and 2cm height. Shape is that of an old farm brand to mark animals. | Yes |
CNC routing | 12mm birch plywood from 10ft x 5ft sheet. Technical drawings produced so all parts can be cut from a single sheet. | Yes | |
Pressure Die Casting | Looking for a new foundry to produce our pressure die cast aluminium centre manifold castings. Tooling available to be re-located to new supplier. Batch runs of 250 based on 1000 pa. | Yes | |
Alloy Platters | I need two types of alloy platters making that spin in a bearing which I have, I just need the platters with steel pin in the centre fixed permanently. Full deatils on request. | Yes | |
Steel Lathe work | 4 | Steel components made out of 50mm diameter round bar | Yes |
CNC Machining | 2,000 | Looking for CNC machined M8 nuts 14.7 X 14.7 ,5.8 thick + patch chamfered edges. | Yes |
Table Legs Manufacturing | 12 | Table legs manufactured and would like prices for them in either mild steal or brass. | Yes |
MDF Milling | I want to consult how much it will cost if we want you to help us mill the file a and b , or how much it will cost if you help us to mill a and c. All to be milled in MDF, I think you could use the MDF with the thickness of 26mm or 27mm. | Yes | |
Machining of Marine Plywood | For cargo area to protect the furniture and the driver in case of an accident. Need a prototype sent to check fitting etc. Will be made out of Marine plywood both 18mm and 22mm thickness | Yes | |
CNC Cutting | Worktops, shelves and a teachers desktops with routed areas on 3 of the worktops for the sinks, gas taps and double sockets to be connected through. Polycarbonate pieces are for a display shelf in the same room. | ||
Copper Machining | Pure copper pen. The ink is a sepia/brown colour. Please provide quote for one sample and for 150 pieces. The copper is C109 tellurium. | Yes | |
CNC Aluminium | CNC milled in 7070 T6 Aluminium with the estimated lead time and delivery | Yes | |
Decorative metalwork to produce furniture components | Company that can provide: Tube rolling, Fabrication, Polishing/Finishing, Machining and Metal spinning. Materials mainly brass and Stainless steel. There are multiple items that need to be manufactured. | ||
CNC Turning and Bending | 2,000 | To be supplied free of grease in readiness for welding, no burrs or sharp edges. Material - Stainless Steel GR 304. (must be ISO certified) | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Waveski Cutting | Which is a kayaking /surfing Hybrid discipline The board is designed for and by me. It will be sealed with epoxy and fiberglass I would want it cut out of Virgin bead SDN grade. | Yes | |
Busbar Transfer Cap Extension | 20 | To be manufactured in a hard plastic material. | Yes |
Knife Blank Milling | The radis on the inner reliefs will all be 1/4 inch in order to facilitate easier machining. The blade and handles call out for a thicker steel but the final product could be .125" 440 c stainless. I will harden and assemble the knives myself. | Yes | |
Investment Casting | 10,000 | Investment Casting of left and right hand Strap Hanger | Yes |
Aluminium Plates | CNC machined / Waterjet cut / Laser cut Aluminium plates. Polished to show a shiny finish. | Yes | |
Metal Prototype | We supply high end spin tops in an array of different metals, we have 2 models. The metals we are looking for initially are Tungsten, Damascus steel, timascus and zirconium. | Yes | |
CNC machining | It would only require 3 axis CNC machining and I would be looking for relatively small order quantities initially. Interested in getting quotes for 10, 20, 50 and 100. | Yes | |
Machined Pins | 1,000 | Machined in carbon steel no.45 Chinese Standard. Chinese Manufacturers preferable as we require these parts urgently | Yes |
Loadable Keg Weight | 5-10 per month | I'm looking for a simple, heavy duty "Key Shape" loadable weight, that should be the same basic dimensions as a real 50 litre Euro Keg. The same used is strong man events or weight training | Yes |
Turbo Adaptor Plate | 1 | Machined out of stainless steel (304 or higher) Size: 10.80cm x 10.68cm x 4.62cm. | Yes |
Aluminium Flanges | 2 | Currently in a prototype stage and looking to get some components manufactured in marine grade aluminium. | Yes |
Restraint Socket | 200 | Threaded sockets made out of Stainless 303 Mill Finish, Surface finish is not critical to the product | Yes |
Parts machined from brass or steel | 60 | 3 Items required in various quantities. All parts need to be produced in either brass or steel. | Yes |
Balustrade components | 74 | Stainless posts and glass brackets to have a brushed finish aligned to the major access. Brushed finish should be high quality, consistent, and aesthetically pleasing, except on the base plate and the bottom 1/2" of the posts which will be hidden. | |
Hollow Acrylic Vial | 5,000 of earch part | Product will require branding on Enclosure. To be used in Railway and construction industry to monitor movement of structures | Yes |
Bearing Spigot | 1,000 | Spigots to be used for mounting rollers. to be made of mild steel. If its easier to manufacture, the end can be round with the 2 flats, required to fit a 19 mm spanner. | Yes |
Ear Muff | 500 | Looking for a costing for x500 off, x1000 off and x2000 off (ex works) for this component. I’d like this done in a bold red like pantone 485c. Needs to be made out of ABS | Yes |
7075 pieces approx 2 x 3 x .6 | 50 | 2 parts, 25 of each. They are all 7075 pieces and I need a really nice finish around the outer diameter. The inner diameter is not as much as a concern. | Yes |
Pressure Die Casting | 250,000 | Material can be LM6 suitable for PDC. Alsi12 or A413 grades could be supplied subject to approval | Yes |
Base Plate | 60 | 11.00071/B Base Plate Issue B MAT’L: Alum Al 6082 T6 DRG: 11.00071.B Manufacture complete to drawing from your own material. Deburr and break edges. | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Mounting Pillar | 120 | 11.00072/C Mounting Pillar Issue C MAT’L: Alum Al 6082 T6 DRG:11.00072.C Manufacture complete to drawing from your own material. Deburr and break edges. | Yes |
Torx Cup Point Set/Grub Screw | 25,000 | 16-32 x 1/8 inch Torx Cup Point Set/Grub Screw.High grade alloy steel hardened and tempered to HRC 45-53. Finish: Electroless nickel (.0002/.0003) over copper flash (.00005 max) per mil-c-26074. | Yes |
Corner Pillar | 2,400 | 11.00074/B Corner Pillar Issue B MAT’:L Alum Al 6082 T6 DRG: 11.00074.B Manufacture complete to drawing from your own material. Deburr and break edges | Yes |
Aluminium Plate Milling | 1 | Small adapter aluminium plate (40x40x3mm) made that connects two existing pieces. The outer profile doesn't have to be a circle, so if it helps machining feel free to add flat edges. | 1 |
Rubber pelmet | 50 | 2400 x 380mm Rubber Flap with Company Embossed Logo | Yes |
Iron railings | 1 | Traditional Iron railings in mild steel, circa 13m in length | Yes |
Precision machining | 1000 | Machining and casting required for a Hydraulic motor in grey cast iron | Yes |
Pigeon hole racking | 1 | I’m looking at putting stainless steel consignment stock in to a customer and supplying racking with it | Yes |
Rubber mat | 1 | Rubber mat with surface shape to be confirmed. Rough sizing 3cm thick 65cm width 85cm length | Yes |
Reusable bottles | 10,000 | Bottles to be used in place of single use bottles. To be used used by tour companies, events etc preferably be 500ml | |
Anti slip strips | 200 | Punched non slip strips - 2200mm x 50mm x 2mm Round holes in Grade 304 stainless | |
Plastic hanger | 100 | Plastic part is 6mm acrylic, ideally transparent. The part is 120mm long by 15mm wide with an offset 6mm hole drilled 75mm from one end | Yes |
TRS Cover 1.073 DIA | 5 | To be made in Kovar alloy and gold plated in accordance with MIL-G-45204 over nickle plate | Yes |
TRS Header 1.073 Inch DIA | 5 | To be made in Kovar alloy and gold plated in accordance with MIL-G-45204 over nickle plate | Yes |
Machined Brass Rods | 1 | Looking to get 1 brass rod made according to the specifications supplied in the drawing. | Yes |
Laceeze Bands | 10,000 | Used to cover your laces to stop your lace knot coming undone. 3 different sizes in 4 different colours | |
Metal Inserts | 388,000 | T5044A-27 End Plate | Yes |
Metal Inserts | 776,000 | T5042J-40 - Collar | Yes |
Metal Inserts | 776,000 | T5042J-35 - Collar | Yes |
Metal Inserts | 1,862,400 | T5042A17 - Insert Bolt for Housing | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Metal Inserts | 1,862,400 | TY00660 - Housing Collar | Yes |
Metal Inserts | 388,000 | T5042M-28 End Plate | Yes |
Metal Inserts | 388,000 | T5042M-27 End Plate | Yes |
CNC Milling | 1 | Four window frame sections to be CNC milled from teak. We can supply the teak ourselves should it be difficult to source | Yes |
Carbon steel shims | 500 | Looking for 500/1000 carbon steel shims for use inside a cog to be manufactured. | |
Treatment of materials | 1 | Looking for various items to be receive a variety of different treatments | |
Wooden furniture | 10 | manufacturer of wooden furniture to make 10 different products. Planning to open about 50 retail customers in 2018 and the forcast is several hundred units for next year. | |
Custom part stamping | 2500 | custom stamping part at a better cost then I am getting it now for, please quote on 2,500 to 5,000 pcs | Yes |
Injection moulding | 20 | Injection moulded prototypes required of two pieces require ten of each, in a spectrum of colours. Eco credentials are extremely important | Yes |
Tooling | 1 | Bom Swage and Grip Gauge (Tooling) - Drawing Supplied | Yes |
Polycarbonate Sheet | 1 | Clear polycarbonate sheet in 700mm x 890mm x 5mm | |
Nylon gear request | 100 | 100 each of 12 differnet types of nylon gears | Yes |
Suction cups | 100 | Need 4cm suction cups suitable for tiled/mirrored surfaces. Will need a sample to test for suitably | |
Laser Jet or waterjet cutting | 500 | Quote for 200/300 & 500 for 3mm aluminium sheet laser jet or waterjet cut. Edges must be clean with no burrs | Yes |
CNC machining of MDF | | 6 parts manufactured MDF or equivalent need to be low cost, rigid and can be painted. ~If you can also quote on painting to a Pantone colour | |
CNC plasma cutting | | Logo cut using CNC plasma from 3mm mild steel plate as everything will all be painted. Would also like to have prices for 3 mm Stainless as an additional option | |
Wood manufacturing | | looking for a trustworthy wood manufacturing partner with experience in high-end consumer products. Ideally would need Finishes, Assembling and Basic Packaging | Yes |
Steel plate | 250 | Bent plates to be made from mild Steel, doesn’t need to be really strong and will be powder coated so low grade is fine | Yes |
Steel plate | 250 | Flat plates to be made from mild Steel, doesn’t need to be really strong and will be powder coated so low grade is fine | Yes |
Enrichner nut | 400 | Enrichner nut made from 303 stainless steel | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Turning service | 400 | Pull cap made from natural acetal | Yes |
CNC cutting | 50 | Looking to get a curved left pannel CNC cut from polycarbonate, can supply .stl files | Yes |
CNC cutting | 50 | Looking to get a curved right pannel CNC cut from polycarbonate, can supply .stl files | Yes |
Component manufacturing | 35 | Looking for: 11 x chain blade, 22 x chain link, 2 x sprocket made out of Hardox 500 Steel | Yes |
CNC bamboo requirement | 1 | Looking for a company to CNC some items out of bamboo for a new product to be added to our product range. | Yes |
CNC machining | | Looking for a company to help with a CNC job as part of the STEM project, science tech engineer maths, F1 in schools | |
Metal bracket | 300 | A bracket to be manufactured out of steel sheet (1-2mm thickness) have drawings available on request. I need a prototype of different materials and thicknesses and then to order a supply of around 300 every 6 months. | Yes |
Light fitting | 50 | Maching some new pendant light fittings. I'll need help to do the 3d drawings but supply a 2d drawing. | Yes |
Electroless plating | 1 | Honeycomb structure measuring 980mm x 120mm x 50mm deep, with a core size of 2.5mm. We are seeking to enhance the reflectivity of the honeycomb by applying a reflective coating to it. | |
Volume flow controller | 100 | Looking to manufacture a volume flow controller, can provide full technical specs | Yes |
Robot welding | 1 | Have a prototype which is perfect but needs better welds so need new supplier | Yes |
CNC milling | | Require a large part milling in tooling board. We are looking to have some hull parts milled up to 2.6 meters long and 400mm wide. | |
Beachwood milling | | The wood is 1m diameter by 1.8 long He would like it cut in to slabs of approx. 2 or 3 inches think | |
Carbon fibre plate | 25 | Sets of plates to me machined out of 1.5mm thick carbon fibre | Yes |
Metal Casting | 30 | Paperweights from a round 3D shape with diameter 10cms and 2cm height shape is of an old farm brand to mark animals | Yes |
CNC routing | | 12mm birch plywood parts cut from 10ft x 5ft sheet | Yes |
Pressure die Casting | 250 | Foundry to produce our pressure die cast aluminium centre manifolds, tooling available for new supplier | |
Aluminium Baubles | | Looking for someone to produce 45 x 45mm baubles in aluminium or brass | |
Table Legs | 12 | Prices for table legs manufactured in mild steal or brass | Yes |
Alloy Platters | | Alloy platters that spin in a supplied bearing, I just need the platters with steel pin in the centre | Yes |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Turned timber posts | 2 | Two turned timber posts to match existing verandah supports. The posts are finished size 95x95mm at the broadest point (top and bottom) with turned profile down the length of the post | |
Lathe work | 4 | To build 4 components out of 50mm diameter roud steel bar | Yes |
CNC Machining | 2000 | CNC Machined M8 nut 14.7 X 14.7 ,5.8 thick + patch chamfered edges | Yes |
Plastic injection moulding | | Looking for plastic injection moulding companies that vertically inject tools as opposed to horizontally. | |
CNC Machining | | Machining of Inductive sensors. I need 3 altogether | |
Parts to be modified | | A small batch of Ti-6-4 axis-symmetric parts to be modified with PEEK inserts and threads to be machined | Yes |
Wooden pagoda snails | 7 | Pagoda snail to be machined they are 670mm in diameter and 160mm in height made out of Western Red Cedar which can be supplied | |
CNC Milling | | Polyurethane based block material to be 5 axis CNC milled to help with the creation of our F1 car to compete in the F1 for schools | |
Stencil Templates | 1 | 3 templates all taperring over 31.74cm in length with with a one inch extension. 1 each of 1.48cm to 3.7cm, 1.16cm to 2.91, 0.92cm to 2.29cm | |
MDF Machining | 6 | Need circles to be machines in 15mm MDF. 3 in 1200mm and 3 in 1160mm diameter | |
Laser Cutting | 1 | laser cut aluminium 6018 tiles, various sizes, thickness 3mm | |
Metal Beads | 400 | Please quote for manufacture out of Brass, Stainless Steel and Titanium and possible requirement for Anodizing in Titanium | Yes |
Thrust Washers | 110 | Plate with matte finish tin after machining .0005-.0008 thick all over made from copper | Yes |
Transfer pipe tie bar | 2000 | Pipe to be formed from Ø6 Bar to be supplied free of grease in rediness for welding with no burs or sharp edges | Yes |
Valve manufacturers | 10000 | Looking to speak with manufacturers who would be capable in machining 15mm domestic service valves | |
Precision turned parts | 20000 | Precision Turned Parts: Block Coupling. 20.000 pcs/year leading eventually to 1500/1700 pcs a month | |
Knife blank milling | 200 | Knife Milling Blanks in 440 c stainless - 2.2 degree grind on the blade - 11.5 inch overall length - Between 10 and 200 pieces | Yes |
Machined aluminium plates | 1 | CNC machined/Waterjet cut/Laser cut Aluminium plates. Remove burrs and sharp edges pror to polishing and anodising (thickness not to exceed 25 microns) | Yes |
Metal machining | | Spin tops in an array of different metals including Tungsten, Damascus steel, timascus and zirconium. technical drawings supplied | Yes |
Blind internal keyway | 4 | 16mm key in 55 dia bore X113 long (into a hole) Material 1.4462 duplex. Part length 293mm. | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo | |||
Injection molded | 100 | Front cover & back cover to be injection molded & assembled. Multiple colors and masking & painting required. ABS~ Disc Magnet to be pasted on the back side of the enclosure. Size - 15*2mm (dia*thick) | |
Beams | | Milling / Drilling of 3.5 Metre beams in RA330. to be produced in 2 different sizes | Yes |
Glass table top | 1 | Water-jet cut a custom drawn glass table top with a turquoise laminated glass insert to sit into a wooden frame work. The glass must be toughened 6mm or 8mm in thickness. The length of the glass would be roughly 700mm. | |
3 Axis CNC machining | 1 | 3 axis CNC machining for parts from oak, 3D cad files availble on request. Would like prices for 10,20,50 and 100 units | Yes |
Logo clip | 5000 | 0.3mm thick aluminium sheet blind embossed or printed, punched to shape | |
Machined pins | 1000 | To be machined in carbon steel no.45 Chinese Standard. Chinese Manufacturers preferable as we require these parts urgently. Please include freight charges. | Yes |
Galvanizing requirment | 1 | Galvanizing of an access staircase, already fabricated in two 2m and 3m. | |
CNC laser cutting | 1 | Multiple parts laser cut out of sheets of 6mm MDF. also need some wood shaping and turned plastic rods | |
Chrome plating | | 22mm x ½ inch female iron x 22mm compression tee piece in brass to be chrome plated | |
Investment casting | 10000 | Investment Casting of left hand Strap hanger to be made into 304 stainless steel, quote price including any tooling costs | Yes |
Investment casting | 10000 | Investment Casting of right hand Strap hanger to be made into 304 stainless steel, quote price including any tooling costs | |
Transaxle parts | 2 | Elliptical Bearing Carrier in 6082-T6 Aluminum | Yes |
Transaxle parts | 1 | End Plate in 6082-T6 Aluminum | Yes |
Loadable keg weight | 1 | Prototype needed initially. Second order likely to be 5 -10 then ongoing 5 – 10 per month. Needs to be heavy duty "Keg Shape", same basic dimensions as a 50 litre Euro Keg. Needs to be able to load with weights. | Yes |
Acetyl turn knob | 40 | 42mm turn knob in black acetyl with a Ra 1.6um deburred natural surface finish | Yes |
Stainless steel spindle | 40 | Stainless steel 303 spindle with a Ra 1.6um deburred natural surface finish | Yes |
Sandwich panels | 1 | 10,788 square metre of Sandwich Panel | |
Hot rolled steel plates | 35 | Low carbon steel plates hot rolled trimmed edge. SAE-AISI 1008 ASTM A6/A6M (or similar) 38.1 x 1250 x 3000mm 3:1 certificate | |
Turbo adaptor plate | 1 | To be machined out of stainless steel (304 or higher) Size: 10.80cm x 10.68cm x 4.62 cm | Yes |
Metal spinning | | Manufactureer of Alluminium and Steel tanks 1-8 litres, metal spinning process. Drawings supplied. Batch quantities required. | |
Want access to buyer leads? join today Still not sure if Applegate is right for you? book a demo |