Other

HOTweezers  represent the state of the art in the design and construction of thermal wire strippers.

Hotweezers thermal wire strippers weigh less than 57g including cable and connector, making it an ideal hand-held solution with smooth and efficient operation. The heater filaments are completely sealed in the stripping head of a Hotweezers thermal wire stripper device enhancing its performance consistently.

Advantages of using HOTweezers:

1. The filament is resistant to oxidation.

2. The stripping head will not distort nor lose alignment as is the case with ordinary hot wire strippers.

3. Since the filaments are enclosed, a greater portion of the heat generated is retained to do useful work. Consequently the power supply can be much smaller than usual, and the current consumption is drastically reduced. The M-10 power supply consumes a mere 20 watts at the highest temperature setting.

4. Wire holes can be ground into the stripping head without damage to the filaments. With wire holes, the rotation of the stripper required to accomplish a strip is reduced from 180o to 15o and mashing of conductors, especially the finer gauges, is completely eliminated.

5. Because the filaments are an integral part of the stripper body, no maintenance is required.

Three different models of the HOTweezers are available to satisfy most stripping requirements. For precise insulation removal Models 4A and 4B have stripping holes to yield a clean, even strip free of insulation "tails" and to prevent mashing of the conductor strands. Model 4C is designed for use on cable jackets and larger diameter conductors. Maximum cable or conductor O.D. that can be stripped is 0.25 inch (6.35 mm) and maximum insulation wall thickness is .05 inch (1.27 mm). For stripping requirements that exceed these dimensions the HOTnife can be used. All models have the new strip length gauge so that repetitive stripping operations can be done accurately. The gauge is easy to adjust without a screwdriver or special tools. The standard power cord for all three models is a flexible, lightweight cable with a high temperature silicone rubber jacket that resists burns.

If you have a requirement that may require a special model, please contact us directly.

Image shows tweezer with power supply.

With a wealth of experience, Perancea is able to provide custom and standard enclosures to meet the exacting needs of a broad range of application requirements from mechanical to electrical and electronics engineering solutions. The company is also a highly experienced mechanical engineering organisation, specialising in the production of all types of enclosures including RFI/EMI shielding solutions and plastic and metal fabrication for the electrical, electronics and associated industries. 

                                                                                                      Perancea: A myriad of electronic packaging solutions

 

 

As the Omnipure European Distributor we are pleased to offer the full range of Omnipure water filters includes the K / CL, E, Q, L, ELF / ELFXL and OCB / OMB / XF water filters . Each one simple manufactured in the U.S and dependable with custom fill medias available to suit all applications such as water coolers, ice machines, coffee machines and for every drinking water application. In addition we are a major Channel Partner to 3M to add the Cuno product range to compliment.

Standard and Custom water filter options are available, combined with trustworthy business advice to give the full support. Our other ranges provide John Guest / RWC tubing and fittings, along with complimentary faucet taps and bubblers etc for water coolers, as well as further fittings and flood protection waterblock devices.

Sheet metal work

V and F Sheet Metal are a UK Hampshire based sheet metal fabrication, sheet metal work and sub-contract engineering company. We provide sheet metal manufacturing services including CNC punching, CNC laser cutting, CNC bending, welding and press work. Using the latest CAD/CAM software modelling for the best accuracy and speed of sheet metal blank development for our in house CNC punching and CNC laser cutting processes. Supporting a wide range of industries in the UK from electronics to lighting, heating and audio.

Established in Fareham, Hampshire in 1985, with the ability to handle engineering projects from one off small batches of bespoke sheet metal work to high volume power press work V and F Sheet Metal are flexible enough to offer you the complete sub-contract sheet metal fabrication service for your growing company.  Regular deliveries to Portsmouth, Southampton, Winchester, Eastleigh, Andover, Basingstoke and other towns in Hampshire from our factory in Fareham is easy. Over-night pallet and small package deliveries right across the UK for those who need it is offered to ease sheet metal component supply.

We have grown to a size where we can offer a complete sub-contract sheet metal fabrication and sheet metal work service to our customers right across the UK. This can include advice on the suitability of sheet metal work designs for manufacturing, sub-assembly work or sub-contract finishing and treatments to your specification e.g. zinc plating, alocrom 1200 / 1000, iridite NCP, surtec 650, silver and black anodising, powder coating, wet painting and screen printing. Continually investing in the latest CNC manufacturing equipment and CAD/CAM software enables us to offer the best combination of quality and price to suit your sub-contract engineering and sheet metal fabrication requirements.

We have a long history of working with UK based lighting companies to reduce their sheet metal fabrication costs and improve the quality of their sub-contract engineering/sheet metal work projects.  With many standard CNC punching tools and material set-up costs can be kept to a minimum when considering new sheet metal fabrication projects.

• Sheet Metal Enclosures and sheet metal housings for the electronics industry
• Reflectors and sheet metal fabrications for the UK lighting industry
• Sheet Metal Perforated Ventilation and Speaker grilles for the heating and audio industries
• Front panel electronics and rack mount sheet metal work
• Welded assemblies - thin gauge to 6mm sheet metal fabrications in ferrous and non-ferrous materials
• CNC punching using Trumpf CNC punch presses
• CNC laser cutting with our Trumpf 3030 3KW fibre laser cutting machine
• CAD/CAM processes supported by Radan 3D and 2D software to aid CNC punching and laser cutting
• Sheet Metal CNC bending up to 3.0M long (7 press brakes), including 3 Trumpf 7036 CNC press brakes and a 3M Safan e-Brake CNC press brake
• Tig, Mig, Gas, Spot and Stud sheet metal fabrication welding capacity
• Power press sheet metal work up to 50 tons with custom press tools

Where can I get sheet metal work?  Look no further if you are looking for CNC punching, CNC laser cutting, CNC bending and other sheet metal working processes:

For further information and to discuss your personal sheet metal project requirements call us on 01489 577786.

For more information about sheet metal please visit this page What is Sheet Metal Work and how is it made?

At Rocburn Limited, we are the fastest growing electric and manual window opening and ventilation specialist. We provide you with window opening solutions  professionally and efficiently, and we help with a variety of problems providing the best window opening solutions service.

At Plastor we specialise in supplying a comprehensive range of plastic boxes / containers, storage equipment and materials handling products to companies big and small, across all industries.

Our large range of plastic boxes are available in all sizes and are suitable for all types of applications. Our huge range of plastic boxes consists of food grade containers, stacking and nesting containers (saving valuable storage space), containers with wheels, extra large distribution boxes, storage boxes with and without lids, boxes with hand holes for easy transporting, clear / transparent containers, ventilated containers, anti-static containers (ideal for electrical parts and engineering components) and much more.

1793-2018 - 225 years as a family run business.

Ormiston Wire Ltd. was founded in 1793 in the City of London and began by making spring wire for corsets and wigs in the days before rubber. The company is now based in Isleworth, West London where we manufacture specialised wires, braids and strands in many different metals. These are used within industries as diverse as special effects in the film industry to high specification wire used in the nuclear industry. We stock an extensive range of wires from stainless steel yacht rigging to surgical suture wire smaller than a human hair. We are still an independent family firm.

Welcome to Technical Cranes

A family run market leader in new and used overhead cranes and gantry cranes. Here at Technical Cranes, we have the ability to tackle any type of contract. With over 36 years of experience in the trade, we specialise in bespoke overhead crane systems and dominate the used crane market throughout the UK and also have vast experience in supplying and installing overhead crane systems to many overseas companies.

Used Overhead Cranes

 

 

We are a small metal stockholding company near Milton Keynes which was set up in 1985 and we specialise in selling Steel and Non-Ferrous Metals in a vast range . see our web shop.

We also sell engineering tools and have a fabrication service see services. Metallurgical Services

• STEEL SHEET
• ALLOY STEEL HEAT TREATABLE
• ALUMINIUM ANGLE
• ALUMINIUM CHANNEL
• ALUMINIUM FLATS
• ALUMINIUM HEXAGONS
• ALUMINIUM PLATE
• ALUMINIUM ROUNDS
• ALUMINIUM SHEET
• ALUMINIUM SQUARE TUBE
• ALUMINIUM SQUARES
• ALUMINIUM TEE
• ALUMINIUM TUBES
• BLACK STEELS
• BRASS SHEET
• BRASS ROUNDS
• BRASS SQUARE TUBE
• BRASS ANGLE
• BRASS CHANNEL
• BRASS FLATS
• BRASS HEXAGONS
• BRASS PLATE
• BRASS SQUARES
• BRASS TUBES
• BRIGHT ANGLE
• BRIGHT STEEL ROUNDS F/C
• BRIGHT STEEL FLATS
• BRIGHT STEEL HEXAGONS
• BRIGHT STEEL LOW CARBON ROUNDS
• BRIGHT STEEL ROUND MED CARBON
• BRIGHT STEEL SQUARES
• BRONZE FLATS
• BRONZE HEXAGONS
• BRONZE PLATE
• BRONZE ROUNDS
• BRONZE SQUARES
• BRONZE TUBE
• CAST IRON
• CASTING METALS
• CHAIN
• COPPER FLATS
• COPPER ROUNDS
• COPPER SHEET
• COPPER SQUARE
• COPPER TUBES
• CUTTERS
• DIES
• DRILLS
• GROUND FLAT STOCK
• GROUND STEEL BARS
• MISCELLANEOUS ITEMS
• MODEL METALS
• NEW PARTS AND MACHINERY
• NICKEL SILVER
• PLASTICS
• RIVITS
• SAFETY EQUIPMENT
• SCREWS
• SEAMLESS STEEL TUBES
• SILVER STEEL
• SPECIALS
• SPRING STEEL
• STAINLESS FLATS
• STAINLESS ANGLE
• STAINLESS HEXAGONS
• STAINLESS ROUNDS
• STAINLESS SHEET
• STAINLESS SQUARES
• STAINLESS TUBES
• STUDDING
• TAPS
• TITANIUM
• TOOLS
• WELDED STEEL TUBE

Buy Generators from Generator Pro

Here at Generator Pro, we offer a comprehensive range of generators covering everything from portable generators to diesel generators and much more.

All of the generators we have for sale are from well-known industry brands and are designed to provide a reliable power supply.

We have been supplying generators to both individuals and commercial customers throughout the UK for a number of years.

At Generator Pro, we make it easy for our customers to buy generators and that’s one of the reasons we offer both a price match promise and free delivery.

We specialise in new generators and our expert team are always on hand to assist and answer questions about our generators for sale.

Izumi Products UK Limited offers a wide range of compression, crimping and cutting tools. We supply battery-operated and hand-held tools and power-driven units from 5 to 200 ton output. We also manufacture compression connectors to suit aluminium, copper and bimetal applications. Connectors range from LV to EHV voltages and are suitable for switchgear and transformers as well as aluminium and copper overhead line systems.

140 years of experience in connection technology and in particular with tools

World-wide, Klauke is renowned for its high-quality electrical connection technology and tools for crimping, cutting and punching. We offer special-purpose solutions for connection technology and tools to meet requirements in the most diverse industry sectors.

In total we offer more than 10,000 products for trade, industry and also the growth markets of renewable energies and modern infrastructure. Since 1996, Klauke has expanded its product portfolio with the Greenlee brand. With the focus on punching tools and cable management, Greenlee perfectly complements our own areas of competence

At Tennco Distribution Limited, we are a progressive electromechanical component distributor. We are family owned and operate in niche markets concentrating on electronic and electrical components for the computing, networking, instrumentation, panel building, audio and circuit board assembly industries.

Backed by 30 years experience, at Tennco, we are committed to service and efficient components distribution coupled with ISO 9002 approval. We offer products at competitive prices with a fast friendly and efficient service.

At SERPRO, absorbents are essential to keeping workplaces clean and safe. Our products are equipped  to handle all type of liquid spills from water to oil, hazmat and chemical spills. Our absorbents come in a variety of  weights and sizes such as pads, mats, socks and booms.

We also stock specialised absorbents for chemical spills, loose adsorbents, security tags and more.

 

 

NeoNickel specialises in supplying high performance metal alloys to a wide variety of industries. As a highly respected European supplier we provide the finest quality heat resistant, corrosion resistant, aerospace, titanium and stainless steel alloys anywhere on the market.

Our core alloys are

• 22
• 310S
• 36
• 400
• 625
• 718
• 80A
• C263
• C276
• RA330^(R)
• Titanium CP3 Grade 2
• Super Duplex UNS S32760

Brooks Forgings Ltd, established in 1960, is a leading UK manufacturer of Forged, Fabricated and Machined components.

We have a comprehensive range of manufacturing processes at our UK based facility and this aids buyers source their full requirements from one supplier.
These processes include:

• Robot Forging
• Upset Forging (16 cells)
• Drop Forging (10 cells)
• Horizontal Counterblow Forging
• Hand Forging
• Machining (14 cells)
• Fabrication & Assembly
• Robot Welding (5 cells)
• Flash Butt Welding 
• Hot & Cold Bending
• Hot & Cold Pressing
• Thread Rolling
• Ring Rolling
• Swaging & Pointing
• Die Sinking
• Marking & Traceability
• Forging Simulation
• 3D Printing
• Reshoring
• 250 Tonnes of Raw Material 
• 2500 Pallets of Customer Stock

Established for over 35 years JPR Electronics are an independent electronics distributor offering a wide range of components and assemblies, with a highly flexible approach to our customers needs.

• Prices are amongst the most competitive available in the UK
• All products supplied from stock. Schedules and call-offs are welcome.
• Our full range of products can be viewed on our website. Orders can be placed online or by phone, fax or email for same day despatch.

Established in 1770 Heaps, Arnold & Heaps Ltd are the UKs leading manufacturer of Lead, Tin and Solder Products.

We offer a wide and diverse range of extruded, cast, machined and engineered lead products, including:

• Lead Ballast/Lead Counterweights
• Lead Sash Weights
• Steel Sash Weights
• Lead Radiation Shielding
• Chrome Plating Anodes
• Tin Plating Anodes
• Plumbing Solders
• Lead Came

Heaps, Arnold & Heaps Ltd offer a tool & mould making facility, enabling us to undertake any extrusion or casting project on a one off basis or large volume runs.

Serving the shipping industry since 1987, Seaward Industrial Supplies have steadily built on the 40+ years of experience of our parent company (Seaward Marine) to give a professional and personal service with a vast knowledge of shipping requirements, including their 24hr time schedules, with every customer large or small receiving the same level of attention.

Distributors for Draper Tools, Silverline Tools, AGMA chemicals and Unitor Chemicals.

Currently supplying a large section of the offshore industry in Aberdeen.

 

We are the exclusive sales and service centre for Swagelok in Scotland, North East England and Ireland. We have been providing an extensive range of fluid system products and services for over 30 years and are recognised as experts in our field.

Whether a multinational corporation or a local plant operation, our customers benefit from the expertise and resources of working with a global organisation. Swagelok Scotland, Teesside and Ireland provide products, solutions and services that are most helpful and relevant to our customers’ challenges.

To support our inventory of fluid system components, Swagelok Scotland, Teesside and Ireland offers a growing range of services including training, eBusiness and integrated services such as inventory management solutions and assembly services, onsite inspection services, equipment and tool hire and supply chain optimisation. With an extensive inventory of products for immediate delivery, this allows Swagelok to provide high quality products and an exceptional service to our customers.

Contact Swagelok Scotland, Teesside and Ireland for further information about our range of products including: - Fittings - Valves - Hoses and Flexible Tubing - Regulators - Quick Connects - Measurement Devices - Tubing and Tube Accessories - Filters - Sample Cylinders - Miniature Modular Systems - Pre-Engineering Subsystems - Welding Systems - Leak Detectors, Lubricants and Sealants.

scotland.swagelok.com

For over 155 years Craftsmen & Professionals have used Henri Picard and Frere Ltd's Hand Tools. PICARD is the name on superb Tweezers, Pliers and many other precision tools.  Our products are found on Horologists benches, in many types of Electronics factories, Engineering workshops, Universities, Research Institutes and Power Stations.  Our products are predominently European sourced, offering value & quality  backed up by a friendly, professional service. With literally hundreds of different Tweezers to choose from as well as a main selection, we aim to match your technical requirement to the best material & type. Tweezer users tend to stick with makes they say have ' the right feel '... and we value the repeat business that confirms that a PICARD Tweezer is a great tool to have on a workbench.   Generous  Quantity Discounts and flexible Call Off options  mean that our service is also valued by Purchase Managers as well as those using the tools.

For over 25 years Weldlogic has lead the market with innovations in micro-TIG and micro-Plasma welding. Its range of state of the art Linear and Computerised power sources are capable of delivering precise current, voltage and travel over programmable weld schedules. Along side these power sources are a range of welding lathes, turntables and linear seam welders. The company’s philosophy is to work in close partnership with its customers, to realise process solutions that meet their exact need. Whether customisation of standard equipment or full turnkey automated machinery is required Weldlogic has the answer.

Offering a comprehensive range of commercial catering equipment and supplies from market leading brands, we guarantee high quality at great prices. Whatever you're searching for, from commercial ovens, fryers or microwaves to warewashers, clothing or kitchen utensils, we have the perfect product to suit all demands.

FFD Catering Equipment is a subsidiary company of Fridge Freezer Direct Ltd. a business specialising in the supply of commercial refrigeration to the catering and hospitality sector. Now branching out into catering equipment, our knowledgeable sales team and dedicated customer service bring over 10 years of experience, guaranteeing you are in safe hands every time you shop.

Our aim is to deliver the widest range of products at the best possible prices ensuring that every business can benefit from superior quality and professional performance, whatever the budget. FFD Catering Equipment is fully ISO compliant, meaning that our customers are guaranteed safety and security during every stage of the shopping process.

We stock the UK's widest selection of cooling & heating products for all of your domestic and commercial needs. Some of the leading brands in the industry entrust us to deliver superior service to customers.

Our extensive range of climate control products ensures we cater to all requirements, making us your go-to destination for heating and cooling solutions.

Established over 25 years ago we are still supplying & Installing Genuine Dexion products all over East Anglia including; Suffolk, Norfolk, Cambridgeshire & Lincolnshire .

At our warehouse based in the heart of Kings Lynn, Norfolk we hold a vast amount of Dexion Products which is growing on a weekly basic. This is set up to showcase the various Dexion Products in a storage environment. Dexion P90 Adjustable Pallet Racking is one of the UK and Europe's leading pallet racking system, with the ability of storing heavy loads and on a fast turn-around. 

Over the years we have worked tirelessly to ensure we provide a professional & safe service to thousands of customers including: NHS, Police Authorities, Ministry of Defence and large food processing companies.

Our experienced sales staff are on the road covering East Anglia and through the UK looking at projects of all sizes, as well as our trained office based staff answering all enquiries and handling orders.