Indicators
Indicators are instruments used in the field of metrology for making and checking linear measurements. They are essentially the analogue or digital dial used to report data in the likes of scales. The benefit of indicators is that they are much easier to read and understand the results (compared to plug gauges, gap gauges, micrometers and vernier scales). Some types of indicators include dial micrometers and test indicators. Indicators can be analogue, with a clock dial face, or digital. When a dial indicator is used in a process of comparison, it is usually referred to as dial gauge. Two industries that use indicators are metalworking and metrology. However, one example of indicators exists on the dial on bathroom scales.
-
Cater-Kwik (Caterkwik)
View company profileWe provide top quality commercial dishwashers from Cater-Wash, Electrolux Professional, Hobart, Hobart Bar Aid & Hobart Ecomax.
Since 1970, our machines have been built using only the most reliable mechanical components available, with no need for printed circuit boards. Manufactured from high grade AISI 304 and featuring double skinned doors to lower the noise and retain heat. All commercial dishwashers are fitted with a breaktank which provides a fully KIWA approved air gap.
Additionally, primary and secondary filtration systems mean longer lasting water quality and improved performance. -
Link Instruments Ltd
View company profileAt Link Instruments, we are a global supplier of quality products such as CO2 level indicators to the marine, fire safety, diving and electrical industries.
Our ULLC2001 ultrasonic liquid level indicator is used accurately around the globe as a reliable halo, FM200 and CO2 level indicator in liquid gas cylinders.
-
AML Instruments Ltd
View company profileAML Instruments are a family run business offering instrumentation, UKAS ISO 17025 calibration, service, repair, spare parts and support for a wide range of instruments / test equipment used in a variety of industries and applications.
-
Tennco Distribution Ltd
View company profileAt Tennco Distribution Limited, we are a progressive electromechanical component distributor. We are family owned and operate in niche markets concentrating on electronic and electrical components for the computing, networking, instrumentation, panel building, audio and circuit board assembly industries.
Backed by 30 years experience, at Tennco, we are committed to service and efficient components distribution coupled with ISO 9002 approval. We offer products at competitive prices with a fast friendly and efficient service.
-
Paramount Electronics Ltd
View company profileAt Paramount Electronics we specialise in industrial electronic repairs, exchange circuit boards and the design and manufacture of industrial electronics. Our highly skilled engineers have the knowledge and experience to undertake almost any form of industrial electronic repair, and all repairs are completed at a fixed price with a 2 year guarantee.
-
Rheintacho UK Ltd
View company profileWe have been developing and manufacturing a wide range of measurement instruments since 1920, always with an emphasis on quality, durability and service. As our products remain in use throughout the world we continue to support our customers with spares, repairs and replacements and reengineered products.
In 2001 we joined with Rheintacho GmbH to create one of the largest rotational speed measurement manufacturers in the world. Rheintacho brings over 100 years of additional expertise, especially in the field of non-contact rotational speed sensors and stroboscopes.
As a consequence, our expanded range now covers a wide selection of products for the measurement, indication and control of rotational speed together with a range of stroboscopes for quality control and maintenance.
Our handheld portable range of tachometers and stroboscopes provides the user with the ability to measure speed and distance as well as carrying out maintenance checks by creating a ‘frozen’ image using a strobe. With equipment for use in a range of environments and applications there is a solution for every need.
Where a fixed solution is required we offer stroboscopes with a range of light sources, widths and trigger configurations to suit individual demands.
Our rotational speed instruments range from mechanical indicators which are directly connected to moving components, to non-contact sensors which generate a signal from the component and transmit this to electronic devices for control and indication. With this range we have the capability to supply effective solutions from stock, or to engineer existing products to meet specific requirements, either as a ‘one-off’ or for a serial production.
Our technical strength is key to remaining at the forefront of our industry, and we work closely with our clients during the product development process to ensure that when we design and develop a product for them it meets the specification and adds value to the finished product. Quality, accuracy and durability are fundamental to our success.
We believe that we can provide a cost-effective solution for your needs, and if there is not currently a standard product, please talk to us and see what we can do for you. -
Penico Gauges Ltd
View company profilePenico Gauges management & production staff has been involved with the Glass Container Industry for over 30 years. In this time we have had the privilege to work with many talented people in mould repair & mould manufacturing workshops. We have developed a deep understanding of the problems facing the mouldmaker & repairer. Penico can offer a solution to your Gauging needs. Bring to us your gauging problems & we will work with you to help you solve your difficulties.
Penico Gauges has exported to over 40 countries. We look forward to being able to serve you.Please contact on info@penico.com with any enquiries.
Penico Gauge Limited is Known worldwide as a well-established and respected Gauge Manufacturing and precision engineering company Based in Bingley. We specialise in Gauges and sub-contract bespoke machining and offer an unrivalled combination of:
• High precision
• Quality
• Reliability
• Flexibility
All our staff have over 30 years’ experience in the manufacture of precision gauges, jigs, fixtures, general-purpose and precision machining to our customers’ requirements.We Have the Skills and knowledge for all types of industries, from Glass and food industry, press tooling, plastic injection to aerospace and worked with a wide range of materials.
We have the facilities to carry out:
-
- Cad Design
- Universal grinding
- Surface grinding
- CNC Grinding
- Wire eroding
- Spark eroding
- Conventional milling And Turning
- CNC milling
- CNC Turning
- Laser Engraving (Fibre and Co2)
-