AKM Fabrications Ltd

Evowalk is the solution for Composite and Built-Up Roof Systems. Our products can be used on all major composite roofing systems. Evowalk can be fitted either across or parallel to roof seams. All our Evowalk systems can be used in combination with our Evorail guardrail range, to provide a total solution to all roof safety and access requirements. When used with our EV fixing bracket installation time is reduced considerably when compared to standard fitting methods. The EV Fixing bracket is TEK screwed to the I beam and then either screwed or riveted onto the roof sheet. The brackets are supplied complete with a bonded sealing strip on the underside. These pads ensure that the watertight integrity of the roof is not compromised. In addition our unique I beam connector provides perfect alignment and strength to the completed system

Our Aluminium walkway is an alternative to our PVCu range. It uses serrated aluminium walkway panels to provide a safe, non-slip route to maintenance personnel. It can also benefit from the addition of toe board or our Aluminium Guardrail to either side, or both sides if required. It can be fitted to all roof surface types and is extremely strong and robust. It offers a long lasting solution to all roof access requirements.

Pitched roofs are easily handled in the Evowalk system. Whether the need is for walkway up to the roof apex or transverse across the roof Evowalk is the solution. We can supply Evowalk pitched roof walkway for Standing Seam, Composite, Built-up...in fact any roof type available. For transverse sections we supply levelling brackets, tailor made for the roof pitch, and of course all Evowalk systems can be combined with our Evorail guardrail range to provide a total solution for all roof safety and access requirements. Depending on the roof type, either our EVS standing seam clamp or EV composite roof clamp is used. This method significantly reduces fitting times, a major cost consideration when budgeting for either walkway or guardrail

We can supply Evowalk plastic walkway for all major types of Membrane roofing systems, as well as concrete, asphalt and timber surfaces. To ensure that the roof surface is not damaged we supply what we term "skis". These fit under the regular I beam sections to spread the load of the walkway and maintain the integrity of the membrane. Evowalk for Membrane roofs is fitted with weights which keep the walkway in position, so that no screw fixings are required. Corners and T sections are easily managed

Our Evowalk Standing Seam system is provided in either short ways, to run across seams, or long ways to run parallel to roof seams. Utilising our new EVS clamp enable Evowalk to be fitted to all major standing seam roof systems: The main benefit of using Evowalk in conjunction with our EVS clamp is the speed of installation. A major cost saving, particularly on larger installations. The EVS clamp is quick and simple to fit and is non-penetrative to the roof, thereby validating the roof manufacturer's warranty. Our Evowalk Seam System can be installed on flat roofs or on pitched sections, using our levelling brackets. We can also incorporate corners and T sections into the design. When used in combination with our Evorail Top-Fix Guardrail system we can offer a total solution to roof safety and access on Standing Seam roofs

Evowalk Stepped Walkway is generally a bespoke product, specifically designed for each individual roof. We can supply stepped walkway for all roof types, including Standing Seam, Built-Up, Composite or Membrane. Depending on the roof type, either our EVS standing seam clamp or EV composite roof clamp is used. This method significantly reduces fitting times, a major cost consideration when budgeting for either walkway or guardrail and of course all Evowalk systems can be combined with our Evorail guardrail range to provide a total solution for all roof safety and access requirements.