BBN International Ltd

• High isolation
• Low polarisation dependent loss (PDL)
• Low insertion loss (IL)
• High stability
• High reliability

Features

• High isolation
• Low polarisation dependent loss (PDL)
• Low insertion loss (IL)
• High stability
• High reliability

Applications

• Fibre amplifier
• Test instrumentation

Agiltron manufactures state-of-the-art Lead Sulfide (PbS) sensors for room temperature operation as well as thermoelectrically cooled operation for spectroscopy from 0.5 to 3 microns. The linear array has 128 elements. The device can be supplied with integrated optical filters. It can be connected with pre-amplifiers or multiplexed amplifiers for various applications. Thermoelectric cooler and thermistor can be built in for temperature stabilisation.Features

• New Automated Chemical Processing (ACP) produces higher yield at lower cost.
• Extremely high reliability under extreme conditions.
• Long shelf life.
• Hermetically sealed package to completely eliminate humidity attack on detection area.
• Wide range of electrical characteristics available.
• Wide range of sizes available.
• 100% tested.
• State of the art microelectronics fabrication capability.
• Specialising in high density arrays. 64/128 element, etc.

Applications

• Designed for use in quality and process control systems
• IR spectroscopy
• Gas monitoring
• Imaging and thermography

The etMEMSTM series FS VOA is based on a proprietary patent pending micro-electromechanical mechanism featuring exceptionally compact size with large shutter movement, simple construction, and easy direct drive. The etMEMSTM series FS VOA is designed to completely block a collimated light beam over 500 mm in diameter and be operated in air without the need for hermetic seal and is fully compliant with the Telcordia 1209 and 1221 reliability standards. The device is ideally suited to be integrated into laser systems. It is available in either normally-open or normally-closed configurations.Features

• Compact
• High Reliability
• Low IL, PDL, WDL & TDL
• Intrinsic tolerance to

Applications

• Power Control
• Power Regulate
• Channel Balance
• Instrumentation

The etMEMSTM series of FS VOA is based on a proprietary patent pending micro-electromechanical mechanism featuring exceptionally compact size with large shutter movement, simple construction, and easy direct drive. The etMEMSTM series of FS VOA is designed to completely block a collimated light beam over 700 mm in diameter and be operated in air without the need for hermetic seal and is fully compliant with the Telcordia 1209 and 1221 reliability standards. The device is ideally suited to be integrated into laser systems.Features

• Compact
• High Reliability
• Low IL, PDL, WDL & TDL
• Intrinsic tolerance to ESD

Applications

• Power Control
• Power Regulate
• Channel Balance
• Instrumentation

• Compliant with CFP MSA standard
• Supports 103.1Gb/s aggregate bit
• OTU4 compatible
• 4x25Gb/s LAN-WDM transmitter
• Maximum link length of 10km on SMF
• Commercial case temperature 0°C to 70°C
• CAUI electrical interface
• MDIO management interface
• Single 3.3V power supply

Features

• Direct LC receptacle optical interface
• Single +3.3V power supply
• Hot-pluggable
• Operating optical data rate up to 112Gbps
• Operating electrical serial data rate up to 10.3125Gbps
• 10 parallel electrical serial interface
• Transmission distance up to 40km
• AC coupling of CML signals
• 1310 nm window cooled EA-DFB LD
• PIN ROSA
• Low power dissipation(Max:16W)
• Built in digital diagnostic function
• Operating case temperature range:0°C to 70°C or -40°C to 85°C
• Compliant with RoHs
• MDIO Communication Interface

Applications

• OTN-OTU4
• Switch to switch interface
• Switch to rounter interface
• P to P Acess Network

• Compliant with 100GBASE
• Support line rates from 103.125 Gbps to 111.81 Gbps
• Integrated LAN WDM TOSA/ROSA for up to 40 km reach over SMF
• Digital Diagnostics Monitoring Interface
• Duplex LC optical receptacle
• No external reference clock
• Single 3.3 V power supply
• Case operating temperature range:0°C to 70°C
• Power dissipation < 9W

Features

• Duplex LC receptacle optical interface
• Single +3.3V power supply
• Hot-pluggable
• Operating optical data rate up to 112Gbps
• Operating electrical serial data rate up to 27.952493Gbps
• 4 parallel electrical serial interface
• AC coupling of CML signals
• PIN ROSA
• Low power dissipation(Max:12W)
• Built in digital diagnostic function
• Operating case temperature range:0°C to 70°C
• Compliant with 100GBASE-ER4
• MDIO Communication Interface
• Compatible with all kinds of commercial ONT

Applications

• Local Area Network(LAN)
• Wide Area Network(WAN)
• Switch to router interface

• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28.05Gbps per channel
• Compatible with 40GE and 56G FDR data rate
• Internal CDR circuits on both receiver and transmitter channels
• Support Electrical or Optical Loopbacks
• Low power consumption <3.5W
• Hot Pluggable QSFP form factor
• Built-in digital diagnostic functions
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)
• Operating case temperature
• Standard: 0 to +70°C Industrial: -40 to +85°C

Features

• Hot pluggable QSFP28 MSA form factor
• Compliant to Ethernet 100GBASE-ER4 Lite
• Up to 25km reach for G.652 SMF without FEC
• Up to 32km reach for G.652 SMF with FEC
• Single +3.3V power supply
• Operating case temperature: 0~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~70oC
• Transmitter: cooled 4x25Gb/s LAN WDM
• EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
• Receiver: 4x25Gb/s APD ROSA
• 4x28G Electrical Serial Interface
• (CEI-28G-VSR)
• Maximum power consumption 5.0W
• Duplex LC receptacle
• RoHS-6 compliant

Applications

• 100GBASE-ER4 Ethernet Links
• Infiniband QDR and DDR interconnects
• Client-side 100G Telecom connections

• Compliant with CFP MSA standard
• Supports 103.1Gb/s aggregate bit
• OTU4 compatible
• 4x25Gb/s LAN-WDM transmitter
• Maximum link length of 10km on SMF
• Commercial case temperature 0°C to 70°C
• CAUI electrical interface
• MDIO management interface
• Single 3.3V power supply

Features

• Hot Pluggable CFP MSA package
• IEEE 802.3ba 100GBASE-LR4 compliant
• ITU-T 4I1-9D1F compliant
• CFP-MSA-HW-Spec-rev1-40 compliant
• Up to 10km for G.652 SMF
• Receiver: 4-lane x 25Gb/s PIN ROSAs
• Transmitter: 4-lane x 25Gb/s LAN-WDM EA-DFB TOSAs
• (1295.56,1300.05,1304.58,1309.14nm)
• 10x10G Electrical Serial Interface (CAUI/OTL4.10)
• MDIO management interface with Digital Diagnostic
• +3.3V power supply
• Power consumption less than 12W
• Compact size: 144.75 x 82 x 13.6 mm
• Operating case temperature: 0 to +70 °C
• Duplex SC or LC Receptacle
• ROHs-6 compliant

Applications

• 100GBase-LR4 Ethernet
• ITU-T OTU4

• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28.05Gbps per channel
• Compatible with 40GE and 56G FDR data rate
• Internal CDR circuits on both receiver and transmitter channels
• Support Electrical or Optical Loopbacks
• Low power consumption <3.5W
• Hot Pluggable QSFP form factor
• Built-in digital diagnostic functions
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)
• Operating case temperature
• Standard: 0 to +70°C Industrial: -40 to +85°C

Features

• Hot pluggable QSFP28 MSA form factor
• Compliant to IEEE 802.3ba 100GBASE-LR4
• Up to 10km reach for G.652 SMF
• Single +3.3V power supply
• Operating case temperature: 0~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~70oC
• Transmitter: cooled 4x25Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
• Receiver: 4x25Gb/s PIN ROSA
• 4x28G Electrical Serial Interface (CEI-28G-VSR)
• Maximum power consumption 4.0W
• Duplex LC receptacle
• RoHS-6 compliant

Applications

• 100GBASE-LR4 Ethernet Links
• Infiniband QDR and DDR interconnects
• Client-side 100G Telecom connections

• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28.05Gbps per channel
• Compatible with 40GE and 56G FDR data rate
• Internal CDR circuits on both receiver and transmitter channels
• Support Electrical or Optical Loopbacks
• Low power consumption <3.5W
• Hot Pluggable QSFP form factor
• Built-in digital diagnostic functions
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)
• Operating case temperature
• Standard: 0 to +70°C Industrial: -40 to +85°C

Features

• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28.05Gbps per channel
• Compatible with 40GE and 56G FDR data rate
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
• Internal CDR circuits on both receiver and transmitter channels
• Support Electrical or Optical Loopbacks
• Low power consumption <3.5W
• Hot Pluggable QSFP form factor
• Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
• Single MPO connector receptacle
• Built-in digital diagnostic functions
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)

Applications

• IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
• Infiniband FDR/EDR
• 128G Fibre Channel
• 4x28Gb/s Multimode OTN