BBN International Ltd

The Optosun 1064nm polarisation maintaining fibre optic switch is inexpensive and provides low insertion loss and high crosstalk isolation in a compact package. Useful for optical add drop modules, optical cross connect systems and network monitoring.Features

• Low insertion loss
• High crosstalk
• Compact package

Applications

• Configurable OADM
• Optical cross and connection system
• Network monitor

Features

• Low insertion loss
• High extinction ratio
• High isolation
• High stability
• High reliability

Applications

• Fibre laser

BY-HDMI-312 includes a transmitter and a receiver, which can extend HDMI ,RS232 and IR signal to a remote location over single fibre cable. Through the cascade or star type optical fibre cabling, the realisation of a signal source transmitting, receiving a large screen display. The cascaded mode between each node only through the 1 optical fibre connection, reduce the complexity of the proposal, to reduce the difficulty of construction, unlimited number of nodes cascade, the transmission distance can be up to 0-100 km, there is no transmission distance problem using splitter solution on the market. Compact size, low power consumption (<3W), can work stably at 75 °C high temperature environment. Very suitable for application and subway station, airport, station, gymnasium.BY-HDMI-312 supports DVI/HDMI video and audio transmission at real-time, max resolution support can reach 1920*1080 @ 60Hz, max distance 2KM (MM fibre cable)/ 100KM(SM fibre cable).Features

• Support 1920x1080@60Hz
• Max extension distance 2km(MM fibre)/100km(SM fibre)
• Single/duplex fibre transmission, pure hardware design, no driver needed, compatible with all operation systems, support plug and play
• Support DVI/HDMI interface
• RS232 and IR function

Applications

• Military command and control systems
• Police command and control systems
• Traffic management systems
• Energy and electricity supply industry
• Government office, medical systems, commercial presentation, multimedia and public utilities etc

BY-SDI-280 is an ideal and economic solution for broadcasting or surveillance applications. It receives one HD-SDI electrical input, perfectly converts electrical SDI signal to single mode optic SDI signal. It supports transmission image of SDTV (143-540Mbps), HDTV (1.485Gbps) and HDTV (3Gbps, 1080p60). Both transmitter and receiver provide equalising and re-clocking at input unit in order to re-construct the signal for consistent quality. Besides, with Beyondopto advanced fibre technology, VSDI can easily pass pathological pattern to prove its complete transmission. Hd-sdi optical transceiver, dedicated security HD SDI monitor, high-definition conference system, support 1080 p (25 hz, 30 hz,50hz,60hz)/1080 I/720P with reverse control data.Features

• Support 1920x1080@60Hz
• Max extension distance 20~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~80KM (SM fibre) /550m (MM fibre)
• Single fibre transmission, plug and play
• Support HDMI/DVI interface

Applications

• Broadcast ,military command and control systems
• Police command and control system
• Traffic management system
• Energy and electricity supply
• Industry, government, office, medical system
• Commercial presentation, multimedia and public utilities etc.

• SFP+ transceivers
• 1310, 1550, 1270 & 1330nm
• CWDM, DWDM & BIDI

Optoplex's Optical DPSK Demodulator, also known as Delay Line Interferometer (DLI), converts phase modulation to amplitude modulation over the entire C+L band in support of data transmission rates of 2.5, 10 or 40 Gb/s. The DPSK demodulator is designed for phase modulated optical communication systems utilised in commercial, defence and space exploration markets. The device plays a key role in improving signal quality and performance to meet the expanding demand for higher data rates and more complex transmission formats within current and next generation systems without major capital expenditure. Optoplex's DPSK Demodulator is based on a patented free-space optical design, which is compact, athermal and polarisation independent. The measured frequency drift over temperature is only ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0.02 GHz/°C for our standard passive device. Further, this DPSK Demodulator exhibits a total polarisation-dependent phase shift of less than 2 degrees over the entire operating temperature range with a high extinction ratio. Optoplex's DPSK Demodulators can be configured to be fully tuneable, colourless tuneable or purely passive. Dual Rate DPSK Demodulator is also available.Features

• Athermal design
• C+L band coverage by a single device
• Low temperature-dependent frequency shift (TDFS)
• Low polarization-dependent frequency shift (PDFS)
• Low insertion loss & PDL
• High power handling
• Passive, colorless tunable (both aligned to ITU Grid) or fully tunable
• Telcordia GR-1221 qualified

Applications

• 2.5, 10, 20 or 40 Gb/s commercial DPSK signal reception
• Customized data rate for advanced applications
• Data rate optimization
• Extend transmission distance

The 10 Gigabit converter is equipped with one RJ-45 port with 10GBase-T and one SFP+ slot according to 10GBase-X. The SFP+ slot allows the use of all standard SFP+ available on the market which gives the device a very high flexibility.
The device is used mainly in Enterprise networks to combine the media copper and fiber together in a universal way.
The converter operates in a transparent mode and has a very short latency. Jumbo frames can be transmitted.
Colour coded LEDS are giving status information about the converter and can be used for failure diagnostics in the network.Features

• Compact 10 Gigabit Ethernet Converter, coupling of Twisted-Pair (10GBase T) and Fiber Segments (10GBase-X)
• Compatible to IEEE 802.3an and 802.3ae standards
• Support of Jumbo Frames
• Utilisation in CWDM and DWDM applications possible
• Desktop chassis with integrated 230 V AC power supply
• Optional 19? chassis with 16 slots, AC or DC power supplies

The MICROSENS Protocol Converter allows service providers to use their existing OC-192/STM-64 networks for the transport of 10 Gigabit Ethernet. For carriers and their customers, this eliminates the need for expensive 10G WAN interface on their router.
The Protocol Converter is a two slot module that fits in both of MICROSENS chassis. It is a cost-effective solution for connecting 10 Gigabit LAN switches to OC-192/STM-64 SONET/SDH and DWDM networks by converting between 10G LAN PHY to 10G WAN PHY.
The 10GbE LAN payload from the access port is mapped into an OC-192/STM-64 framing format and is transported from the line port at wire speed. The module incorporates a flow control mechanism and if the LAN traffic exceeds the capacity of the OC-192/STM-64 link, it will generate MAC pause frames to the source device.
This module can also drop frames coming through its ingress client port in order to match the data rate of the 10G WAN egress port.Features

• Connect 10G Ethernet equipment to OC-192/STM-64 networks
• Leverage existing SONET/DWDM network
• Eliminates the need for expensive router interfaces
• XFP pluggable interfaces
• DDM support for optical interfaces
• Complete performance monitoring and management via SNMP or MICROSENS Web GUI
• Hot swappable, Plug and Play operation
• In-band 10Mb channel (DCC) for remote management

As operators require additional, and more varied, 10GbE-based services to be handled by their existing and growing OTN backbone, efficient ingress and egress become mandatory.
An OTN transponder is the most straightforward, cost-effective answer for delivering Ethernet encapsulation inside OTN lines for backbone interconnection.
The MS430553M Transponder makes it possible to use MICROSENS at the OTN line side as a client of OTN backbones. A single transponder allows economical adaptation of up to 10GbE clients to/from six independent OTU2(e) lines in a compact 2 slot module compatible with existing compact 2RU or 7RU MSP3000 chassis.
The MS430553M can also be used as a triple OTN regenerator of OTU2(e) lines.Features

• Multiple OTN Transponder: 6x10GbE clients, 6xOTU2(e) lines or 3xOTU2(e) lines regeneration
• Pluggable module compatible with any MICROSENS MSP3000 chassis already installed in the field
• Economical SFP+ interfaces for client and line sides

The MICROSENS 10G transport modules are part of the MSP 3000 Platform and are used as OC-192/STM-64/10GbE/10GFC/OTU2 signal regenerators or as metro, regional, or long haul DWDM transponders.
The MS430567M supports OC-192/STM-64 and 10 GbE LAN on the client side and a proprietary bit rate on the line side (11.09 with 10dB FEC). The MS430550M supports all 10G protocols from 9.95 Gbps to 10.709 Gbps, including 10GbE LAN PHY, WAN PHY, 10GFC, OTU2 and OC-192/STM-64.
Combined with MICROSENS optical booster and pre-amplifier, when using the MS430567M, selected optics achieve link distances (with full channel counts) of up to 300 km without in-line amplifiers and more than 2000 km with in-line amplifiers.Features

• 10G transponders for short and long haul applications
• Distances up to 2000 km for multispan
• Increase bandwidth capacity at low cost
• Optional FEC and NG FEC for very long haul applications
• Ideal solution for metro, regional and long haul optical networks
• Wire speed performance with low latency and jitter
• Supports DWDM configurations up to 88 channels
• Digital Diagnostic Monitoring and management via SNMP