Brother Moulding Division
The Moulding division of Brother Industries (UK) Ltd, (formerly known as GKK Plastics), was formed in 1990 delivering a precision injection moulding and assembly service to a blue chip client base. We are part of the global Brother Group consisting of over 30,000 employees worldwide, with access to the Brother Network and knowledge centres.
Based on a 24,000 sq. metre site in Wrexham, North Wales with good transport links to all areas of the UK. We supply Plastic Mouldings to a diverse range of markets including Electronics, Medical, Agricultural and Construction industries and can provide a total manufacturing service from concept design to finished product.
As specialists in the moulding of technical components, we have extensive assembly experience in both high and low volume manufacturing. Our highly efficient operation and continuous improvement philosophy ensure we remain extremely competitive and can offer the very best value to our customers.
At Brother we will always strive to offer an exceptional service and to meet and exceed our customer’s expectations.
Filter products and services
-
Injection moulding glass filled PA6 Northwich
Nylon 6 is a Polyamide, A crystalline material that is tough, resilient and creep resistant. Nylon 6 is made from Caprolactam and is used extensively in the fibre markets. Nylon 6 is very suitable injection moulding parts and can be extruded. It can be modified to increase rigidity and impact resistance. It is used in Bearings, washers, screw caps, conservatory roof parts, power tool housings, laser tags, connectors, strapping and Brush bristles.Request a Quote Supplied by Brother Moulding Division -
Injection moulding glass filled PA6 Shewsbury
Nylon 6 is a Polyamide, A crystalline material that is tough, resilient and creep resistant. Nylon 6 is made from Caprolactam and is used extensively in the fibre markets. Nylon 6 is very suitable injection moulding parts and can be extruded. It can be modified to increase rigidity and impact resistance. It is used in Bearings, washers, screw caps, conservatory roof parts, power tool housings, laser tags, connectors, strapping and Brush bristles.Request a Quote Supplied by Brother Moulding Division -
Injection moulding glass filled PA6 Stoke-on-Trent
Nylon 6 is a Polyamide, A crystalline material that is tough, resilient and creep resistant. Nylon 6 is made from Caprolactam and is used extensively in the fibre markets. Nylon 6 is very suitable injection moulding parts and can be extruded. It can be modified to increase rigidity and impact resistance. It is used in Bearings, washers, screw caps, conservatory roof parts, power tool housings, laser tags, connectors, strapping and Brush bristles.Request a Quote Supplied by Brother Moulding Division -
Injection moulding glass filled PA6 Whitchurch
Nylon 6 is a Polyamide, A crystalline material that is tough, resilient and creep resistant. Nylon 6 is made from Caprolactam and is used extensively in the fibre markets. Nylon 6 is very suitable injection moulding parts and can be extruded. It can be modified to increase rigidity and impact resistance. It is used in Bearings, washers, screw caps, conservatory roof parts, power tool housings, laser tags, connectors, strapping and Brush bristles.Request a Quote Supplied by Brother Moulding Division -
Injection moulding glass filled PA6 Wrexham
Nylon 6 is a Polyamide, A crystalline material that is tough, resilient and creep resistant. Nylon 6 is made from Caprolactam and is used extensively in the fibre markets. Nylon 6 is very suitable injection moulding parts and can be extruded. It can be modified to increase rigidity and impact resistance. It is used in Bearings, washers, screw caps, conservatory roof parts, power tool housings, laser tags, connectors, strapping and Brush bristles.Request a Quote Supplied by Brother Moulding Division -
Injection moulding HDPE
Polyethylene is a member of the polyolefin family that also includes polypropylene. This group of materials is the most widely used accounting for over half of worldwide thermoplastic consumption Compared to LDPE, HDPE has greater rigidity, hardness, heat distortion temperature (HDT) and chemical resistance but a lower impact strength. It has better low temperature properties than polypropylene homopolymer but is not as flexible or as hard. As with polypropylene, the material is resistant to boiling water.
Please contact us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding HDPE Chester
Polyethylene is a member of the polyolefin family that also includes polypropylene. This group of materials is the most widely used accounting for over half of worldwide thermoplastic consumption Compared to LDPE, HDPE has greater rigidity, hardness, heat distortion temperature (HDT) and chemical resistance but a lower impact strength. It has better low temperature properties than polypropylene homopolymer but is not as flexible or as hard. As with polypropylene, the material is resistant to boiling water.
Please contact us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding HDPE Crewe
Polyethylene is a member of the polyolefin family that also includes polypropylene. This group of materials is the most widely used accounting for over half of worldwide thermoplastic consumption Compared to LDPE, HDPE has greater rigidity, hardness, heat distortion temperature (HDT) and chemical resistance but a lower impact strength. It has better low temperature properties than polypropylene homopolymer but is not as flexible or as hard. As with polypropylene, the material is resistant to boiling water.
Please contact us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding HDPE Northwich
Polyethylene is a member of the polyolefin family that also includes polypropylene. This group of materials is the most widely used accounting for over half of worldwide thermoplastic consumption Compared to LDPE, HDPE has greater rigidity, hardness, heat distortion temperature (HDT) and chemical resistance but a lower impact strength. It has better low temperature properties than polypropylene homopolymer but is not as flexible or as hard. As with polypropylene, the material is resistant to boiling water.
Please contact us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding HDPE Shewsbury
Polyethylene is a member of the polyolefin family that also includes polypropylene. This group of materials is the most widely used accounting for over half of worldwide thermoplastic consumption Compared to LDPE, HDPE has greater rigidity, hardness, heat distortion temperature (HDT) and chemical resistance but a lower impact strength. It has better low temperature properties than polypropylene homopolymer but is not as flexible or as hard. As with polypropylene, the material is resistant to boiling water.
Please contact us for more information.Request a Quote Supplied by Brother Moulding Division
