Brother Moulding Division
The Moulding division of Brother Industries (UK) Ltd, (formerly known as GKK Plastics), was formed in 1990 delivering a precision injection moulding and assembly service to a blue chip client base. We are part of the global Brother Group consisting of over 30,000 employees worldwide, with access to the Brother Network and knowledge centres.
Based on a 24,000 sq. metre site in Wrexham, North Wales with good transport links to all areas of the UK. We supply Plastic Mouldings to a diverse range of markets including Electronics, Medical, Agricultural and Construction industries and can provide a total manufacturing service from concept design to finished product.
As specialists in the moulding of technical components, we have extensive assembly experience in both high and low volume manufacturing. Our highly efficient operation and continuous improvement philosophy ensure we remain extremely competitive and can offer the very best value to our customers.
At Brother we will always strive to offer an exceptional service and to meet and exceed our customer’s expectations.
Filter products and services
-
Injection moulding LDPE Wrexham
To make LDPE resins, Brother Moulding uses high pressure, high temperature tubular and autoclave polymerization reactors (Figures 7 and 8). Ethylene is pumped into the reactors and combined with a catalyst or initiator to make LDPE. The LDPE melt formed flows to a separator where unused gas is removed, recovered, and recycled back into the process. The LDPE is then fed to an extruder for pelletization. Additives, if required for specific applications, are incorporated at this point.
Please feel free to contact us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection Moulding Northwich
Our Moulding Division has machines ranging from 25 tonne to 550 tonne. These are automated using high-speed robotics to ensure process consistency and to maximise efficiency. This, combined with Lean Manufacturing techniques used by our team of Engineers, means we can increase productivity, reduce cost and ensure we develop the most efficient process for our customers.
Please contact us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Chester
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Crewe
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Northwich
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Shewsbury
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Stoke-on-Trent
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Whitchurch
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division -
Injection moulding Nylon Wrexham
With nylon injection moulding, granular plastic is fed by gravity from a hopper into a heated barrel. As the granules are slowly moved forward by a screw-type plunger, the plastic is forced into a heated chamber, where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that rests against the mould, allowing it to enter the mould cavity through a gate and runner system. The mould remains cold so the plastic solidifies almost as soon as the mould is filled.
Please call us for more information.Request a Quote Supplied by Brother Moulding Division
