Compass Protection Manufacturing Ltd

Armco Crash Barriers in the UK has become the generic name for the corrugated steel crash barrier you would see around a racetrack protecting the drivers and crowd.

Contact us on 0121 250 9211

Armco Barrier Corners and changes of direction are easily managed with Cenpart's Flexible Corners. Available as Internal (corner inside a building) or External (corner outside a building), they are 90 degrees as standard but easily bent on site to suit any angle. They are a major improvement in convenience and safety over the traditional mitred corner piece as they present a rounded corner rather than a sharp one. Mitred Armco Barrier Corners, fabricated to any angle. are still available if you need to match existing.

Contact us on 0121 250 9211

The Ramped Down type terminal that you see on Highways are generally unnecessary for barriers installed in offroad applications. Because of the different dynamics of impact, Highways systems generally use weaker posts designed to knock down and rely on firmly anchored distant points at each end. Whilst Offroad Barriers are designed to be strong enough between posts to resist impact and do not usually require anchoring at the ends.

Contact us on 0121 250 9211

Corners and changes of direction are easily managed with Cenpart's Flexible Corners. Available as Internal (corner inside a building) or External (corner outside a building), they are 90 degrees as standard but easily bent on site to suit any angle. They are a major improvement in convenience and safety over the traditional mitred corner piece as they present a rounded corner rather than a sharp one. Mitred Corners, fabricated to any angle. are still available if you need to match existing.

Contact us on 0121 250 9211

Cenpart's standard Integrated handrail system utilises "Ball Standard" type fittings and 48.3mm diameter tubing. We can also provide for 42.4mm diameter handrailing and supply with Clamp Type handrail Fittings if required.

Contact us on 0121 250 9211

Corners and changes of direction are easily managed with Cenpart's Flexible Corners. Available as Internal (corner inside a building) or External (corner outside a building), they are 90 degrees as standard but easily bent on site to suit any angle. They are a major improvement in convenience and safety over the traditional mitred corner piece as they present a rounded corner rather than a sharp one. Mitred Corners, fabricated to any angle. are still available if you need to match existing.

Contact us on 0121 250 9211

Heavier duty system originally designed for Highways use on the approach to bridges and other structures as it deflection under impact is much less than corrugated beams. Posts are generally set at 2.4m or 1.2m.

Contact us on 0121 250 9211

Finish the run of OBB at full height and bolt into the end of the beam to cap it off flush with a profiled plate.

Contact us on 0121 250 9211

Finish the run of OBB at full height and bolt into the end of the beam to give a rounded off end.

Contact us on 0121 250 9211

Cenpart's AXESS ladder system was designed to be a safe and simple to assemble, permanent vertical ladder in modular format. It is a suite of individual components which are easily bolted together to create a solid and robust finished ladder. We normally carry stock of all parts allowing for a speedy delivery of either single parts or a complete ladder to suit your requirements.

Contact us on 0121 250 9211