Compass Protection Manufacturing Ltd

Used to terminate double sided runs ie one set of posts with barrier either side.

Contact us on 0121 250 9211

Armco Car Park Barriers are the most common type of barrier and you have probably seem them along the centre of Roads and Motorways. Versatile in use, they are 310mm wide with 85mm corrugations and are generally available as a 3.2 metre effective length ,achieved from a 3.5M overall beam or 1.6m from a 1.9m overall beam both have a 300mm overlap at each end and are jointed with 8 no bolts. We can supply "make up" beams cut to exact size for your required run length or we can fabricate specials to suit any situation.Curved beams are available to accommodate the contours of your site, but a curve of 50m can be achieved with standard car park barriers..

Contact us on 0121 250 9211

Cenpart are able to offer a variety of solutions to the problem with our Armco column protectors and also our range of PolyWrap products, all of which are designed to protect your structural elements from careless driving of both cars and forklifts.

Contact us on 0121 250 9211

We offer a range of corner guards to protect from errant vehicle movements in theses situations and can custom build to match your site requirements.

Contact us on 0121 250 9211

We specialise in providing protective crash barriers and offer a full installation service. We supply Armco-type crash barriers, the most widely used crash barriers. They are frequently seen on motorways, around private building and carparks, and alongside private roads.

Contacts us on 0121 520 9400

Curved Armco Barrier sections less than 29m radius will require the use of special order curved beams, rolled to suit your radius. Lead time on these beams is normally around 2 weeks.

Contact us on 0121 250 9211

Curved Armco Barrier sections less than 50m radius and greater than 30m can be addressed by use of either standard 1.6m effective length half beams or by use of special order curved beams, rolled to suit your radius.

Contact us on 0121 250 9211

It is possible for us to supply beams rolled to less than 6m radius, by special order, but lead times may be longer and there will be evidence of "edge rippling". An alternative solution is the use of a fabricated mitred radius. This can be delivered quicker and is a cheaper solution than the rolled beams for tight radii.

Contact us on 0121 250 9211

Curved Armco Barrier sections over 50m radius do not need any special order Beams, as they can be achieved using standard 3.2m effective length beams. The closer that you get to 50m radius, then the beams require some manual force to close the gap between the beam and the post set to the radius.

Contact us on 0121 250 9211

Versatile in use, they are generally available as a 3.2 metre effective length, achieved from a 3.5M overall with a 300mm overlap at each end and jointed with 8 no bolts. We can supply "make up" beams cut to exact size for your required run length or we can fabricate specials to suit any situation

Contact us on 0121 250 9211