Compass Protection Manufacturing Ltd

Curved Armco Barrier sections less than 50m radius and greater than 30m can be addressed by use of either standard 1.6m effective length half beams or by use of special order curved beams, rolled to suit your radius.

Contact us on 0121 250 9211

It is possible for us to supply beams rolled to less than 6m radius, by special order, but lead times may be longer and there will be evidence of "edge rippling". An alternative solution is the use of a fabricated mitred radius. This can be delivered quicker and is a cheaper solution than the rolled beams for tight radii.

Contact us on 0121 250 9211

Curved Armco Barrier sections over 50m radius do not need any special order Beams, as they can be achieved using standard 3.2m effective length beams. The closer that you get to 50m radius, then the beams require some manual force to close the gap between the beam and the post set to the radius.

Contact us on 0121 250 9211

Versatile in use, they are generally available as a 3.2 metre effective length, achieved from a 3.5M overall with a 300mm overlap at each end and jointed with 8 no bolts. We can supply "make up" beams cut to exact size for your required run length or we can fabricate specials to suit any situation

Contact us on 0121 250 9211

Versatile in use, they are generally available as a 3.2 metre effective length, achieved from a 3.5M overall with a 300mm overlap at each end and jointed with 8 no bolts. We can supply "make up" beams cut to exact size for your required run length or we can fabricate specials to suit any situation.

Contact us on 0121 250 9211

Armco Barrier Corners and changes of direction are easily managed with Cenpart's Flexible Corners. Available as Internal (corner inside a building) or External (corner outside a building), they are 90 degrees as standard but easily bent on site to suit any angle. They are a major improvement in convenience and safety over the traditional mitred corner piece as they present a rounded corner rather than a sharp one. Mitred Armco Barrier Corners, fabricated to any angle. are still available if you need to match existing.

Contact us on 0121 250 9211

Armco Barrier Corners and changes of direction are easily managed with Cenpart's Flexible Corners. Available as Internal (corner inside a building) or External (corner outside a building), they are 90 degrees as standard but easily bent on site to suit any angle. They are a major improvement in convenience and safety over the traditional mitred corner piece as they present a rounded corner rather than a sharp one. Mitred Armco Barrier Corners, fabricated to any angle. are still available if you need to match existing.

Contact us on 0121 250 9211

Sometimes refered to as Terminal Type A, this is the cheapest and most common End Terminal.

Contact us on 0121 250 9211

Soft impact or Solid Fixed Restrictor Swing Opening -Single or Double Leaf Galvanised and Powder Coated Finish.

Contact us on 0121 250 9211

Hoop Barriers manufactured in any size, to suit any situation in mild or stainless steel.

Contact us on 0121 250 9211