CSS Worksafe Ltd

The RGA 10R is supplied in three standard lengths: 8 Mtr / 16 Mtr / 32 MtR. However custom lengths can be made up to suit the client¿s application. The RGA10R is used in conjunction with the rope grab to provide vertical, or near vertical fall protection. The RGA10R is fitted with a single spliced eye and fitted with a nylon thimble.The hawser laid construction of the nylon rope, provides good shock absorption qualities and offers some resistance to alkali, oils and organic solvents.

The RGA 16E is supplied in three standard lengths: 10 Mtr / 20 Mtr / 30 Mtr. However custom lengths can be made up to suit the client¿s application. The RGA16E is used in conjunction with the rope grab to provide vertical, or near vertical fall protection. The RGA16E is fitted with a spliced eye on both ends and is fitted with nylon thimbles. This makes the rope reversible and will extend the usage of the product.The hawser laid construction of the nylon rope, provides good shock absorption qualities and offers some resistance to alkali, oils and organic solvents.

The RGA10 is designed to provide vertical/inclined fall protection to operatives ascending /descending a ladder or structure. This version of the rope grab is for use with 16mm Hawser Laid Rope Only. This unit comes standard with a shock pack fitted and cannot be removed, however due to the ¿gate opening¿ method of attachment, the RGA10 offers positive closure and good camming action. The locking cam on this device is toothed and arrests well on the hawser laid rope. When used in conjunction with the RGA10R hawser laid rope, the RGA10 provides excellent protection as a vertical fall protection system, normally used in heavy industrial areas where fouling and debris will be transferred to the rope. The RGA10 is fitted with a shock pack to minimize loading transferred to the anchors. In use, it is recommended that slight tension is placed on the rope to aid movement, as with all highly flexible systems. In working conditions it is usual to provide additional fall protection equipment to protect the user when detaching from the device at height (i.e. RGL Range).

The SKC 8MM Cable Grab is designed to provide vertical fall protection to operative ascending /descending a ladder or structure. This version of the rope grab is for use with 8mm Steel Wire Rope Only. When used by itself, the SKC 8MM Cable Grab should be connected directly to the chest attachment of a harness (RGH2/RGH4) via a karabiner. This ensures that the operative is held close to the structure and in the event of a slip, the fall distance and loading on the top anchor is minimal. In working conditions it is usual to provide additional fall protection equipment to protect the user when detaching from the device at height (i.e. RGL Range). Normally some training is required to illustrate safe working practices.

The RGA14 is designed to provide vertical/inclined fall protection to operatives ascending /descending a ladder or structure. It is also currently used in the industry, as a protection device on the safety rope. The RGA14 is for use with 10.5 ¿ 12.7mm Kernmantel Rope. The RGA14 can be permanently attached to the rope or removable. Although the uses for this lightweight rope grab are numerous, our largest client is currently the aircraft industry, where the RGA14 is used for customized adjustable length fall arrest lanyards. When used for vertical progression, it is recommended that slight tension be placed on the bottom of the rope to aid movement. In working conditions it is usual to provide additional fall protection equipment to protect the user when detaching from the device at height (i.e. RGL Range).

The RGK 6 is a lightweight version of the RGK 5. This device can be fitted to fall arrest lanyards, but is normally seen connected to ropes and used with rope grab systems to provide vertical protection. Used throughout the industry as part of a protection system on portable ladders.

The RGR1 is portable, lightweight and is easy to erect on site. It has adjustable lower and middle legs at 80mm intervals to adapt and adjust to uneven surfaces and varying ground conditions. There are 2 additional anchorage points (SWL 200kg each) on the underside of the head for additional primary/secondary systems. This unit has many applications such as confined access, entry, egress, rescue, retrieval, manholes, silos & trenches, etc.

This heavyweight karabiner is primarily fitted to the ends of fall arrest lanyards, due to its high MBS.The twistlock closure makes this karabiner very safe to use, as it locks automatically when it is clipped into an anchorage point.

The RGK 16 is a steel, captive eye karabiner. This item is predominantly used as a connector on fall arrest lanyards and webbing fall arrest blocks.

The RGP2 is a pole strap/ work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt. The adjuster is easy to use ¿one handed¿ either under tension or not. The 45mm webbing, is protected by a wide pad in the work area, to offer some protection against abrasion and extend the life of the product. The 1.4mtr length of the RGP2 allows the user enough freedom of movement, without being exposed to a fall. The RGP2 is primarily used for pole climbing, but can also be pressed into service for mast climbing, maintenance and general work on open steel structures. When pole climbing, additional equipment should be used to prevent falls whilst moving. When the RGP2 is attached, the operative can then use both hands to perform tasks whilst in a safe and comfortable position. This device is normally used in conjunction with an RGH3 or RGH4, which also allows for the attachment of additional fall arrest equipment.