CSS Worksafe Ltd

With the introduction of elasticated webbing on the leg & lower chest straps, the RGH9 harness provides additional comfort and support during use. Based on the RGH2, this RGH9 is also fitted with a rear dee and a chest mounted front dee. This harness can be used similar to the RGH1 (see data sheet), but has the added feature of the front dee ring to extend the working capability of the harness. Utilizing the front dee, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane. A variety of other devices can be used with the front dee ring, but please check for suitability.In addition to the elasticated feature, the harness is fully adjustable and fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied to the front dee ring.

The harness is fitted with a rear dee and a chest mounted front dee. This harness can be used similar to the RGH1 (see data sheet), but has the added feature of the front dee ring to extend the working capability of the harness. Utilizing the front dee, the harness can be fitted with a rope and grab system (RGA12) for vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane. A variety of other devices can be used with the front dee ring, but please check for suitability.The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

The RGH5 is designed for use as a confined access harness. The front and rear attachment points can be used as standard fall arrest points and the rescue strap can be used for lifting and lowering. When used, the rescue strap keeps the operative in a near vertical position, which is preferred when recovering an unconscious casualty. This harness is used throughout the industry in conjunction with a tripod (RGR1) and a winch unit to access confined spaces, vertical shafts, sewers and silos. As with all of the RidgeGear harnesses, the RGH5 is suitable for use with fall arrest/recovery blocks.

The RGH4 includes all of the features of the RGH1-3 harnesses, (see data sheets). This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas. The RGH4 is a ¿multi task¿ harness and will allow operatives to access almost any area in safety using a combination of the RidgeGear products available. As with the RGH2, this harness is suitable for use in performing rescues from height using the RGR4 rope rescue kit. As with the RGA3, the wide belt fitted to the RGH4 is comfortable and provides lumbar support to the operative. The belt is also fitted with three gear loops for carrying tools leaving the hands free thus maintaining the required three points of contact when climbing. All of the features, combined with a good load bearing capacity, make this harness the ideal choice for the professional.

CSS Worksafe Ltd provide Harnesses.

Lanyard Extension Strop.strop for linkage between harness and fall arrest block. For vertical use above ground to ease attachment and detachment. In a rescue situation the Connector Strop allows the resuer to free the casualty from a system when using steel cable.

The RGK 4 is a lightweight version of the RGK 3 carrying a lower MBS. Although this item can be fitted to fall arrest lanyards, it is also used in conjunction with belay devices and pulleys in the rope access and rescue industries.Again, the RGK 4 is fitted with a twistlock auto closure.

Full Body Harness with Single Rear Attachment.All P&P "Fall Arrest" Harnesses are manufactured from quality polyester webbing which exceeds the minimum strength requirements required in the European Standards. They are designed with comfort and ease of donning in mind.

Full Body Harness with Single Rear Attachment Point.All P&P "Fall Arrest" Harnesses are manufactured from quality polyester webbing which exceeds the minimum strength requirements required in the European Standards. They are designed with comfort and ease of donning in mind.

The RGH1 harness is a basic access harness fitted with a rear dee only. This harness is used primarily with a fall arrest lanyard (I.e. RGL1), to provide an operative with basic fall protection. When used in conjunction with a ¿ twin leg lanyard¿ (RGL3), the harness can be used for tower climbing, scaffold and general steel erecting, as the twin leg lanyard would provide continuous attachment through ¿double clipping¿. As with all of the RidgeGear harnesses, the RGH1 is suitable for use with fall arrest blocks, however we recommend the addition of the RGL4 extension strop to facilitate easy connection.The harness is fully adjustable and is fitted with rip stitch indicators.