Everyvalve Ltd

Petrochemical Ball Valves Flanged
Manual Valve Ranges from Flange Class 150, Flange Class 300, Flange Class 600, Flange Class 1500, Flange Class 2500 in Carbon Steel, Stainless Steel. Also See Below Electric Actuated Valves and Pneumatic Actuated Valves.

Visit us at Everyvalve.com

Petrochemical Ball Valves Threaded
Manual Valve Ranges from Threaded BSP, NPT , Socket Weld, Butt Weld: Class 1500 in Carbon Steel, Stainless Steel.  Also See Below Electric Actuated Valves and  Pneumatic Actuated Valves.

Visit us at Everyvalve.com

Petrochemical Gate Valves Flanged
Manual Valve Ranges from Flange Class 150, Flange Class 300, Flange Class 600, Flange Class 1500, Flange Class 2500 in Carbon Steel, Stainless Steel.

Visit us at Everyvalve.com

Petrochemical Gate Valves Socket Weld
Manual Valve Ranges from Threaded BSP, NPT, Socket Weld, Butt Weld : Class 1500 in Carbon Steel, Stainless Steel. 

Visit us at Everyvalve.com
 

Valves Standards
API - American Petroleum Institute
BS - British Standards
DIN - Deutsches Institute For Normung
ASME - American Society Mechanical Engineering
ISO - International Organization for Standardization
CE - Conformance Mark
PED - Pressure Equipment Directive
& Many More....

End Connection Options For Petrochemical Valves
RTJ Flange: Ring-type flange to ANSI/API/DIN
RF Flange: Raised face type joint flange to ANSI/DIN ? smooth or serrated finish
Socket Weld End: Socket weld detail to suit pipe size and schedule specified
Screwed End (Male): Male taper/parallel thread to suit requirements
Screwed End (Female): Temale taper/parallel thread to suit requirements
BW End: Prepared butt weld end detail to suit pipe size and schedule specified
Plain End: Plain weld end for mating with socket weld detail - to suit pop size and schedule specified

Ball Valves Brass
Full bore PTFE seated Brass No. Plated body + Chr. ball & F BSP ended 1/4" - 4" 30 to 12 bars. Use with water, air, gas and oil. Steel lever handle* for operation PTFE seals. 30 bars to 1.5".

Page 17 of Everyvalve.com site for Prices. 

Mini Ball Valves Brass
Reduced bore Brass Ni. Plated hex. body + Chr. ball & PTFE seats. BSP ended 1/8" - 3/4". to 12 bars. Water, air, oil & gas. Thumb grip lever standard or long lever as special GG or MF threads are available.

Page 17 of Everyvalve.com site for Prices.

3 Way Port Brass Ball Valves
Ball valve spec. as TYPE 60/90 but 3 way version for flow diversion. Sizes 1/4" - 2" BSP. Use 'L' or 'T' for specifying configuration on a horizontal plane. Pressure to 10 Bars SS Types also.

Page 17 of Everyvalve.com site for Prices.

Ball Valves SS
SS 316 Full bore PTFE seats + lever LOCK handle. 1/4" to 2" BSP. To 50 Bars pressure. Two part design. Well suits acids, chemicals & various uses at very economic cost.

 Page 17 of Everyvalve.com for Price.

Ball Valve SS
SS316 reduced bore valve. Economic type. PTFE seats + SS lever + plastic coat. 1/4" - 2" BSP. To 75 bars. For acids & chemicals.

Page 17 of Everyvalve.com for Price

Ball Valves CS/SS
3 Piece Carbon Steel/SS trim. Full Bore. Anti Static Fire Safe SS316 Body also + Lock Lever. 1/4" to 4" BSP. Std is 50 Bars. (Weld ends - Socket /Butt/Flg) Cast Iron & SS Flgd type also.

Page 17 of Everyvalve.com for Price.

Swing Check Valve Brass
Swing In-line brass valve Nitrile/Hard seated flap. 3/8"- 4" BSP threaded. Cheap valve to 10 bars. For water.
Bronze & SS type also

Page 17 of Everyvalve.com for Price. 

Gate Valve Type 157 Brass
Brass BSP Long Heavy threaded with Hand Wheel 20 Bar for Industrial applications.

Page 17 of Everyvalve.com for Price.

Butterfly Valve
Valves are supplied with Notched LEVER handles, Handle GEAR operation,1 Nm = 8.84 lbs/ins Sizes to 4000mm possible, Different combinations of disc materials such as Al.Bronze can be fitted. Epoxy Resin Electric & Pneumatic actuation can be mounted. Instrumentation also. Other seals can be FPM or PTFE. Pressures vary in size.

Page 18 of Everyvalve.com for Price.

Angle Globe Valve In Pneumatic
A very useful Pneumatic Control valve for project and general Chemical & process industry applications. Normally Closed is Standard operation wns i.e.  Water, Oil, Aggressive, Media Steam ( 9 Barg Max). Compactness allows easy installation and also spares assembly. Plastic actuators also supplied > Type 554 Seals : EPDM :- (Std), Seats:- PTFE, Body :- SS or Bronze Temp Max : 130 Deg C.

Page 19 of Everyvalve.com for Price.

SWING FLAP VALVES
Non return valve for fitting between PN flanges in STEEL pipe- work on a horizontal or vertical plane. Maximum pressure is16 bars and flows to 4 M / second. Seats are soft FPM with other options of construction. Pulsing service must be avoided. Use bolt torque data shown for "Spring Check Valve". Uses for water, air, chemicals & some acids (SS). Temps to 150°C (Subject to Seals).

Page 22 of Everyvalve.com for Price.

Knife Gate
Is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
 

• Pulp and Paper
• Power plants
• Wastewater treatment plants
• Chemical plants
• Food and Beverage
• Bulk handling
• Mining
• etc

Page 21 of Everyvalve.com for Price

Check Valves:

SPEC: Type 973 PN16 Flgd Spring Check in S.G. Iron Buna seal. Valve & Strainer also complete as shown above Type 22M970 is Ball Check valve Flgd PN10. SGI Epoxy Coated body. (Blue). 

SPECIFICATION: PN16 flanged valve with bronze trim for use up to 16 Bars w.n.s. (50mm to 300mm are to BS5153). Gunmetal trim & Epoxy coated Body. (Blue) temp. up to 70°C. Std Drain Plug fitted ..... * = Non Std.

Cast Iron Body (GG25) Epoxy Coated. SS302/4 Spring and Pin. Brass plates to 100mm and Cast Iron Plates 125mm upwards. Wafer fitting between Flanges PN16 to 400mm and PN10 upwards 450mm to 600mm. The Valve must be used with spindle in vertical position on horizontal lines (Valve can be used in vertical lines also.) Seals are EPDM. All Dual Plate valves may seep.

Page 22 of Everyvalve.com site for Prices.

Tidal Flap Valves 

Used for outfall flow from walls or pipe flange ends into rivers or the sea. SS Anti Tamper proof hinge pins and bronze bushes. Epoxy finish of unit provide a corrosion resistant performance. CI & S.G Iron Body. Bronze face trim and lifting hooks are standard.

Expansion Joints

Mountable on pipe work to absorb - Expansions, Contractions, Oscillations & Vibrations. Diminution of : Hammering, Noise & Electrical Conductivity.

Penstocks
Suitable for 5M on and 3M off seating heads. Comprising C.I. Frame and door (Door on 100mm being gunmetal).  Frame & Door having flat bac suitable for mounting on vertical concrete wall.  Operation by means of a SS non rising screwed stem, working through a gunmental nut top of door. (100mm working integral nut in door) and terminating in cast iron cap direct on frame. Clockwise Closing, Coating in Black Bitumen, Extras: Handwheels, Extension Spindles, SS Assemblies, Actuation, Bolts, Top Brackets.

Page 24 of Everyvalve.com for Price.

LIGHT SEWERAGE PUMP (VORTEX) IN SS 304

Application for solids handling to 40mm in sewerage type applications. Not suitable for metal objects/other non stated uses. Max Temp = 50°C Diameter for all = 164mm. Side outlet design.

CENTRIFUGAL PUMPS IN STAINLESS - BRASS & PPO SS Type (304)

All pumps are flooded suction type working on direct coupled basis. Avoid running dry. Dry running protection recommended. IP 45 connection. Class F Insulation. Continuous Service. 50°C max. Carbon Ceramic Mechanical Seal. Spindle in 416 SS. Impellor made in glass reinforced 'Noryl'. Motor AL) externally ventilated closed type. 'DROPS' system. Closed junction box.

Jet Pressure Types

Recommended for potable water. Complete with switch, lead & handle & motor thermal trip. IP 44 insulation Class B winding. Max liquid temp is 50°C. Continuous rating.

Hoses

• Clear PVC, Standard Low Toxic.
• Terylene PVC Reinforced Low Toxic .
• Arizona Spiral Delivery Low Toxic.
• Armavin PVC.
• Wire Spiral (Clear) HNA.
• TricoFlex PVC Smooth Reinforced (Yellow) PETP.
• Trigger Spray Gun etc.

Page 27 of Everyvalve.com for Price.

• MA3 Electric Barrel and Container Pump.
• MA5 Electrical Barrel and Container Pump Seal-Less SL .
• MP2 Barrel & Container Pump with Air Driven Motor (ex).
• Type 205 PP Hand Drum Pump.

Page 26 of Everyvalve.com for Price. 

Ball Valve Range:

• PVC Ball Valves
• ABS Ball Valves
• PVC ECONOMY Range Ball Valves
• PVC Compact Ball Valve
• BLACK POLYPROPYLENE Ball Valves (Glass Filled)
• PP Ball Valve
•  Above Valves Are Also Available in Actuation Range, Please contact our sales team

Page 2 of Everyvalve.com for Prices.

Aquamatic Valves
Angle pattern valve for Pneumatic 'on' 'off' control or use with solenoid valve for actuation from service line pressure. Simple & effective with water & chemicals. Direct Pneumatic D/A control is possible.
Plastic Valve ( PPO Body) Type 520-526
Also Cast Iron Iron BSP Type 524 & Flanged ANSI 150 versions. >

Pressure Relief Valve
Manually adjustable Pressure relieving valve for sustaining of safety applications with clean chemicals. Large PTFE diaphragm gives good control. Relieves excess pressure. Low range. Plastic Valve.
Type 03P711 Type 715

Pressure Reducing Valve
Manually adjusted Valve for reducing upstream pressure to downstream. Suitable for clean pumped chemicals. Plastic Valve.

Large PTFE diaphragm gives even control for reducing pressures in-line. There must be a differential of 0.5 Bar. Low pressure Type '76'

Ball Check Non-Return Valve
Non return valve which operates best in the vertical position. Good minimum 'hang up' properties. With a strainer it can be a foot valve. Plastic Valve.
Type 03P31C

Air Release Valve
For Expelling Air in Pipe Systems when start/filling systems at highest point. Will not release air from pressurised circuit. Special dynamic versions releasing pressurised systems are available on page 5. Plastic Valve.
Type 03P856

Page 3 of Everyvalve.com site for Prices. 

Diaphragm Valves (Manual)
Manually Operated Spigot Ended with provision for locking device with, removable key and standard inlet connection for electrical position indicator (Extras). Other valve ends supplied at cost. TYPE 04P617.

Diaphragm Valves
Manually Operated Spigot Ended with provision for locking device with, removable key and standard inlet connection for electrical position indicator (Extras). Other valve ends supplied at cost. Type 04P677.

Pneumatic Diaphragm Valve Normally Close OR Normally Open
MA small dependable Pneumatic valve for reliable simple operation. Normally open or closed versions available.
Type 04P610

Pneumatic Normally Open Diaphragm Valve Simple Type
Basic valve used with air control used for closing where there is a minimum line service pressure keeping the valve open known for economic applications. (Pig farm applications). Type 04P647

Largest Pneumatic Normally Close / Normally Open Valve
This heavy spring normally closed valve offers good all round chemical resistance. Chemical process applications are ideal. Plastic actuator head resisting corrosion . Type 04P690.

Page 4 of Everyvalve.com for Prices.

Diaphragm Valves
Manually Operated Spigot Ended with provision for locking device with, removable key and standard inlet connection for electrical position indicator (Extras). Other valve ends supplied at cost. Type 04P677.

Mini Ball Plastic Valves
Simple Tap for water usage in O.E.M application. Note: Female Thread should be screwed hard against a shoulder stop.
Female Thread Depth = 10mm, Colour = Black.

Swing Check Valves In Plastic
PP Swing Check Valve with PN16 Flanges for Chemical and Water applications. Bolted cover allows full opening. (SS Bolting). Avoid Hamming & Heavy particulates applications. Unique valve. Type 3304.

Dynamic Air Release Plastic Valves
This air release valve vents air under pressure or when filling a pipe system with water. This must be used in conjunction with a fine strainer and isolating valve in emergencies. Not suitable for aggressive chemicals. Use vertically. Emptying lets intake. Please note body size stays same with different end connection. Type 03007.

Page 5 of Everyvalve.com for Prices.

Check Valve For Sewerage
Approved Check Valve for drainage with mechanical rubber jointed inlet and plain male spigot outlet. Top inspection cover plus lever arm flap control. Cheap valve for easy installation. Terracotta colour.
Type 342/442.

Solenoid Valve Direct Operating
The smallest of chemical solenoid valves with MPM electrical IP65 connectors as standard. Direct action gives good control plus economy of choice.
Type 52.

Solenoid Valve Direct Operating
The small + of chemical solenoid valves with MPM electrical IP65 connectors as standard. Direct action gives good control plus economy of choice. For clean chemicals.
Type 102.

Solenoid Valve Direct Operating
The small ++ of chemical solenoid valves with MPM electrical IP65 connectors as standard. Direct action gives good control plus economy of choice. For Chemicals Clean and dirt free media recommended.
Type 105.

Page 6 of Everyvalve.com for Prices.

Solenoid Valve Direct Operating
The smallest of chemical solenoid valves with MPM electrical IP65 connectors as standard. Direct action gives good control plus economy of choice.
Type 0652

Solenoid Valve Direct Operating LARGE
A solid dependable electrical valve for reliable direct operation. Manual override and optical indicator for visual display + hold open device. For use with various chemicals. Normally closed/Power open function.
Type 07205

Solenoid Valve Servo Type
Electrically operated SERVO solenoid valve which needs a clean liquid, inherent differential downstream pressure to work. Other feature are as type 205. MPM plugs included. Chemical uses.
Type 07225

Spring Check Non Return Valve
These unique multi position working check valves & Foot Valves and Strainer are good economic reliable D. Union Industrial items with options for FPM & Flanges as needed. Stainless Steel spring ensures closure - (Cracking pressure approx 0.1 bar). EDPM is Standard. PP Body type also available with coated PTFE Spring. EPDM is Standard. PVC Type 4" based on 3" size Note - Foot Valves only in PVC - refer to size table for ends Dims for PVC - Foot valves & strainers = +5% weight - some design & weight changes with PP - sizes refer to PVC check valves.
Ref: 07P66 PVC - Foot Valve & Strainer Valve
Ref: 07P67 PVC - Spring Check Valve
Ref: 07P2001 PP - Spring Check Valve

Page 7 of Everyvalve.com for Prices.

Flow Indicator
Variable area accurate flow indicators, are vertically mounted and are easy to use. Wide range of media may be used and calibration is based using CLEAN particle free water. Specials are possible at extra cost. Dovetail sections on the length of the body permit fixing of adjustable switches for 'high / 'low' positions or readout transmitters. Special magnetic loaded floats in PP or SS are used with ext. Limit switches & both cost extra. (SG is 1) Body material standards are for TROGAMID(21) to 60C. For chemicals- POLYSULPHONE(22) TO 80C. Severe chemicals- PVC(03) TO 50C.
Type 805
Type 850

Turbine Rotameter
Electronic Readout Device BSP/Flanged in SS316 or Nylon body. Gives Flow Rate + Volume + Batch on Liquid on large LCD battery Op. For clean liquids only. Magnetic SS impeller used in both types. Air versions available. Display for reading flow rates. Display can indicate: total sprayed (with zero setting) up to 99.999.999 units. Partial volume with different measurements : litres, imperial gallons, US. gallons. Impulse setting for adequate calibration of liquid with different temperature and viscosities. Impulse setting for 1/2" to 6" flowmeters, with sinusoidal wave sensor. The tolerance are less then ± 1%.
SS Version
Nylon Version

Visual Indicator ONLY Type GPRF

Page 8 of Everyvalve.com for Prices.

Designed for diverting liquid flows along alternative routes/ports Chemicals and water applications are typical uses subject to material of valve etc. Compatibility. All valves are the Ball Plug Type and have PTFE seats & EP seals WNS

Type (1) = PVC True Union valves with bottom entry 'L' Port socket end. Lockable standard.
Type: 10P60.

Type (2) = PVC True Union valves with horizontal entry 'T' Port socket end. Lockable. configuration.
Type: 10P65.

Type (3) = PP 2 part union valves with bottom entry 'L' Port connection standard. (Any End).
Type: 10P20.

Type (4) = PP Single Union valves with bottom entry 'L' Port OEM economy type. (BSP Female).
Type: 10P21.

PVC Butterfly Valve To 250mm ( PP to 24" )
This light valve give efficient operation combined with economic cost & corrosion resistance. A slim disc gives good flow qualities + the valve can also be fitted with sockets for ease of cementing straight into pipe with minimum fuss. EPDM seals are standard (FPM is extra). Spring acting lever has limit travel positioning notches. Gearboxes for all sizes possible. Do not over torque/tighten bolts when mounting. Options for Electric/Pneumatic Actuation also) PVC Spindle and metal insert.
Type: 10P163

Page 10 of Everyvalve.com for Prices.

***Spring Auto Self Close Pour Tap*** New
3/4" BSPm Spring Auto Self Close Pour Tap suitable for Water Tanks, Bowsers, Chemical Drums and OEM use. Simple pour down design from horizontal fixing with Push Mushroom Hand Knob operation on end. These faucets are a unique design.
Sample Request

'EvE' PP Pour Taps
EPDM Seals & Thread Gasket. This orange co-Polypropylene angled pour tap is ideal for OEM equipment in dispensing chemicals or water as necessary. Hose outlet is suitable for hose connection. 1/2" version if 62% of the flow of 3/4" * 20 type. Pressure is recommended for 4 bars or less & max 90 C.SS Fixing screw. These Taps Faucets could be supplied in Nylon with FPM Seals on Special Request.

Page 11 of Everyvalve.com for Prices.

PP Hose Stopcocks
Small plug cocks suitable for aggressive chemicals in engineering plastics. Designed for low pressures.(1 Bar) Max Temps: PE to 45°C PP to 80°C PVDF to 100°C Hose fitting ends. NEW DESIGN Large Bore.

PP Hose Taps (Reduced Bore)
The light horticultural taps in PP/Acetal resin are for low pressure water applications where threads and hoses need to be joined. 90 deg. thumb grip/Butterfly operation. Thick liquids not to be used. Nitrile seal.

FLO-RITE 3/4" Drum Faucet
3/4" BSP Male.  Overall Length = 92mm.  This taper threaded tap for drum openings is for non pressure uses. Made of GOLD COLOUR PE has no seals. Operates on a 90° turn by thumb grip. Treacles or acids not to be used. There is no flange at foot of 3/4" male thread 10mm long. Wt.=36g

FLO-King 2" Drum Faucet
Overall Length= 156mm Wt= 290g
Large tap for 2" drum female threaded outlets where quick emptying is required. Made of Gold coloured Polyethylene with no internal seals. Turns 'ON' or 'OFF' 90° with a hand bar. A small flange and gasket is at the foot of 15mm fixing thread length.

Adaptor Thread (Used in Chemical Drums) PP CARBOUY Adaptors
Trisure Type: Trisure-Male x 2"BSP Female.
Mauser Type: Mauser-Male x 2"BSP Female.
IBC Type :2" BSP Female (S 60x6)  (Din Adaptors 6131 are Female x Female) (Overall Length = 53mm & 96 Gms Weight)

Page 11 of Everyvalve.com for Prices.

Plastic Slide Gate Valves

* Simple Push/Pull Operation - Quick to Operate - Full Clear Bore
* 'S' Type - Cement sockets, Buna seals with sealed head and spindle
* 'B' Type - Spigots (Emergency non leak tight version)
* Lightweight, Compact & Cheap - Pressures - 10 psi max (Largest)
* Applications for Drainage, Clean Water, fish farms etc.

Swing Outlet Valves In PVC  (2 Hinges)

# Council Outfall type
* Material - PVC(WNS)
* Simple Self Acting
* Installs Quickly
* Full Bore when open
* Spigot Ended
* Lightweight/Cheap
* Use with water only at low pressure

Eg. Waste Drainage.

Swing Flap Valves (Wafer Type) In PP
Components:- Body, Disc, Blade & FPM Seal. (CS/SS Body ring extra). Outside Dias made to suit flange Stds. (F/F=Face to Face in mm. PVC types available + 10% minimum. Encapsulated SS Hinge pins are standard.

Full Flow Type '12P24' available 15mm-200mm size for max flow uses.

Spring Check Valves (Wafer Type)
Non Return Valve for fitting between flanges in plastic pipework only, ay any angle. The SS closure spring can also be in other materials (Hastelloy C) as can 'FPM; soft seat. Sizes to 300mm. Max pressure usable is 10 bars at ambient. Max 90° C. Cracking pressure is 0.02 bar approx. Fits between 4504/BS10 & 1560 flanges. PVC & PVDF available with changed Spec. & price. Applications for water, chemicals & air. Avoid shock use & dirt.

Page 12 of Everyvalve.com for Prices.

Angle Seat Valves
Material - Black Polypropylene
Pressure - 0 to 10 Bars
Seal Material - Nitrile Rubber
Connections - Male BSP ends
Temperature - 5°C - 80°C
Applications - Water/Air (light use)

UPvc Gate Valves
Material - Grey U PVC
Pressure - 0 to 10 Bars
Seal Material - EPDM Rubber
Connections - Plain or BSP
Temperature - + 5°C - 50°C
Applications - Water/Chemical

Globe/Needle Valves
Material - Black PP (Globe) PVC (Needle)
Pressure - 0 to 10 Bars
Seal Material - EPDM (Globe) FPM (needle)
Connections - Threaded Female Ends
Temperature - + 5° - 80°C (PP) 50°C (PVC)
Applications - Water/Air/Chemical?

Page 13 of Everyvalve.com for Prices

Water Meter Valves
Material - Yellow Nylon/Brass
Seals - Nitrile
Pressure - 0.5 to 6 Bars
Temperature - 0°C to 60°C
Gears - ACETAL Resin
Metal Parts - Stainless

Mini POM Valve
Size - 1/4" BSP MF
Body - Hexagon Ball Valve
Material - Black POM + Buna
Pressure - to 8 Bars
Weight - 27 gms
BSP length - 10mm
Length * L - 49mm Height
`H`*- 45mm

Water Meter
Material - Painted Brass / C.I.
Seals - Nitrile *= B89-31707
Pressure - 0 to 16 Bars
Temperature - 0°C to 45°C
Magnetic Drive Multi Jet Principle
Numeric scale + dials down to .001 cu M.
Flgs=PN16. Versions available: hot water
Recommended maximum flow per month:-
Sizes: 1/2" & 3/4" to 250m³
1" & 1¼" to 370 m³
1½" & 2" to 2,000 m³
3"+ to 3,000 m³
RESETABLE TYPE 1" :-
This can be supplied if required. Type FR price is £160.00

Page 13 of Everyvalve.com for Prices.

Bucket Strainers &  Y Strainers
Protect piping system components from damage caused by dirt or debris in the process media. They cost less than other types of strainers and are lightweight and very compact. Because they can often be supported by the pipeline alone, they work in applications where other strainers cannot.

Page 14 of Everyvalve.com for Prices.

Spring Check & Foot Valve Strainers
Uses for POM & Nylon are only water. Low cracking pressures apply to above valves. (See Page 7 for 3" & 4" Foot Valves & Strainers in PVC).

Page 14 of Everyvalve.com for Prices

Strainers Only
Foot Strainers only, can be attached to - Hoses, Pumps, Tanks or Valves to reduce particle intake. Clean regularly. Open area is 40% Approx. Aperture size 1 & 2 is 0.5mm approx in moulded mesh design. Items 3,4 & 5 have moulded slots 8mm wide app.

In Line PVC Swing Check Valve Plain Socketed (Application For Water)
These are light duty full flow valves which are cheap & low restriction. Take care with suitable uses consideration materials of construction. Hammer action service uses are not recommended.  Typical uses:- Irrigation, Fishfarming & Swimming Pools.

Page 14 of Everyvalve.com for Prices.

Plastic Valve  'K' Type (Servo) N Closed
Application: Suitable for water and irrigation Not good for other liquids at all.

Specification:
Pressure: 0.3 min - 8.0 max Bars.
Voltage: 12v DC, 24v AC, 240v AC,110v AC.
Body: FR Nylon 66. SS Plunger.
Terminations: Flying Leads 30cm long.
Ends: BSP female threaded.
Diaphragm: Natural Rubber.
Temperature: 30°C maximum.
Flow control on central screw + M.Ove Black Nylon / PVC composite body.

Plastic Valve PPS Direct Type BSPm (N.Close) (D132, D332, D144, D344)
Applications: Suitable for aggressive chemicals based on reliable simple design.

Specification:
Pressure: 0 - 1.6 Bar & 65°C.
Voltages: 12v DC, 24v AC, 240v AC,110v AC.
Current: 20v A Approx. 36v A Inrush.
Terminations: IP65 Plug type MPM182.
Ends: BSP male threaded..
Seals: FPM Standard.
Body: D132 - D332 PPS (Polyphenylene Sulphide): D144 - D344 PEI (Polyetherimide)
(Weight 420 grams).

Page 15 of Everyvalve.com for Prices.

For water use only. Ref :V907 / V917 , 24302
Pressure 0.2 - 10 Bar.
Servo OEM Design In Line Spade Terminal 6.35 mm. BSP M.
Beige - 240v AC
6 w - 7.7 v A
Yellow - 24v AC
2.2 w - 4.6v A

Page 15 of Everyvalve.com for Prices.

Application: REF : L 180 (L182), L 316, L 280, L133 / L121, L377, L113
Strainers must be used where there is any grit or dirt into the service. FPM seals & volts DC will reduce pressures.
L180 is now L182 / L280: Water, Air, Oil (subject to seals). 2 / 2 way Aggressive Chemicals - Don't Use L316: Clean liquid use. Explosion types on special request. L178 / L127: Suitable to shut off liquid and gaseous fluids*.
L133 / L377 / L113 / L153: Not suitable for use with dangerous fluids. they are free from CE marking in conformity with article 3 § 3 of the European Directive 97/23/EC (Pressure Equipment Directive)*.
* (verify the compatibility of fluid with material in contact).
MPM Size = ( 122 to 1") ( 182 to 1.1/4" )

Specification
Body : Brass (SS - see type 316).
Terminations : IP65 MPM (DIN Connector) Free MPM Supplied.
Voltage : 12v DC, 24v AC, 240v AC,110v AC. Spare Coil £16.00.
Ends : BSP female threaded.
Seal : Nitrile Std ( FPM Special ).
Temperature: Std. Buna < 85 C. FPM < 125 C.
Pressure : Servo 0.3 min - 10.0 max Bars. (bars) (w.n.s)

Page 15 of Everyvalve.com for Prices.

Application:
Suitable to shut off liquid and gaseous fluids; particularly suitable to shut off overheated water and steam (verify the compatibility of fluid with materials in contact).

Specification:
Body : Brass.
Pressure : 0.3 min - 8 max Bars. (bars)
Voltage : 12v DC, 24v AC, 240v AC,110v AC.
Ends : BSP female threaded.
Seal : Reinforced PTFE (Polytetrafluorethylene).
Temperature: -10°C to + 80°C
PTFE dia. min press 0.4 bar Max 170°C. (L153 140°C types also) Only AC voltages. 5/2 Way Type 1/4"BSPf All Voltages £48.00.

Page 15 of Everyvalve.com for Prices.

Hose Fittings Variations:

• PP Hose Adapters (M/Thread x Hose) (Grey PP).
• Hose T Barb Fittings (Black PP).
• Hose Y (Black PP).
• Hose Elbow (Black PP).
• Stepped Hose Adaptors Male/Female (Multi Hose Fit) (Black PP).
• Hose Cross (Black PP).
• Hose Adaptors Bent 90° Version (Grey PP).
• Hose Menders (Black PP).
• Hose Adapters Female Nut Liner & Seal Versions (in Line) (Grey PP).
• Hose Menders Reducing (Black PP) No Natural (A).
• Hose Adapters Female Nut Liner & Seal Versions (90°) (Grey PP).
• Hexagon Keys - Hose Adapters PP.
• Hose Adapters Female Single Piece Hose Adapter (Black PP).
• Hose Adapter BSP x Twin Barb HoseTails (Black PP).
• Hose Adapter BSP x Tri BarbHose Tails (Black PP).

Hose Barb Fittings - Notes
'A' Column is Laboratory Standard Nat PP
'B' Column is Economy Black/Nat PP
Technical

Hose Tail sizes given fit bore of Hose with same size
(interference Fit)
Max Pressure = 8 Bar at ambient temperature
Max temperature 80o deg C at reduced pressure

Fittings :
(np=NPT, n=Nylon, p=PVC)
Minimum Order Value £30
Minimum Item Order £4
Packs sizes 100 to 1" - 50 to 1½"

Page 28 of Everyvalve.com for Prices.

Clamp Saddle
Body : Black Polypropylene
Bolts : Plated Steel
Seals : Nitrile
Pressure : PN10

For Metric Pipes only Double Branch Types also available.

Page 29 of Everyvalve.com for Prices.

Quick Release Hose Coupling - CAM ACTION

• Coupler Male Thread.
• Coupler Female Thread.
• Coupler Hosetail.
• Adaptor Male Thread.
• Adaptor Female Thread.
• Adaptor Hosetail.
• Dust Cap Coupler.
• Dust Cap For Coupler.

Page 30 of Everyvalve.com for Prices.

Polypropylene Pipe Fittings

• BSP Sockets.
• BSP Reducing Sockets.
• BSP Nipples.
• BSP Reducing Nipples.
• BSP Plugs.
• BSP Elbows Female/Female.
• BSP Elbows Female/Male.
• BSP Tees.
• BSP Long Bushs.
• BSP Concentric Reducing Bushs.
• BSP Caps.
• BSP Backnuts.
• BSP Riser.

Page 31 of Everyvalve.com for Prices.

Polypropylene Beige - STANDARD FITTINGS FOR PIPE

• Sockets Plain Female.
• Sockets BSP Female.
• Sockets Metric Female
   
• Tees Plain Female.
• Tees BSP Female.
• Tees Metric Female
   
• Elbows 90 Deg Plain Female.
• Elbows 90 Deg BSP Female.
• Elbows 90 Deg Metric Female
   
• Elbows 45 Deg Plain Female.
• Elbows 45 Deg BSP Female.
• Elbows 45 Deg Metric Female
   
• Unions Plain Female.
• Unions BSP Female.
• Unions Metric Female
   
• Caps Plain Female.
• Caps BSP Female.
• Capss Metric Female
   
• Nipples Half Plain Male/Half BSP Male .
• Nipples BSP Male.
• Nipples Metric Male
   
• Full Face Flange Plain Female.
• Full Face Flange BSP Female.
• Full Face Flange With Hosetail
   
• Flange Stub Plain Female.
• Flange Stub BSP Female.
• Flange Stub Metric
   
• Sockets Adaptor Plain Female.
• Sockets Adaptor BSP Female.
• Sockets Adaptor Metric Female
   
• Pipe 9/6 Bar Medium.
• Pipe 15/9 Bar Heavy.
• Pipe 10 Bar Metric 
• Bulkhead Fittings Light.
• Bulkhead Fittings Heavy.

Page 32 of Everyvalve.com for Prices.

PVC Metric Fittings

• Sockets Plain.
• Tees Plain.
• Elbows 90 Deg Plain.
• Elbows 45 Deg Plain.
• Unions Plain.
• Caps Plain.
• Pressure Pipe 10 Bar.
• Stub Flange.
• Full Face Flange Plain.
• Bends 90 Deg Plain.
• Tees Plain with Treaded Cetral Take Off.
• Elbows 90 Deg Plain X BSP.
• Adaptor Plain Male X BSP Male.
• Adaptor Plain Male X BSP Female.
• Adaptor Plain Female X BSP Male.
• Adaptor Socket Female Plain X Female BSP Thread.

Page 32 of Everyvalve.com for Prices.

Threaded Fittings

• Sockets BSP Female.
• Tees BSP Female.
• Elbows 90 Deg BSP Female.
• Elbows 45 Deg BSP Female.
• Unions BSP Female.
• Caps BSP Female.
• Nipples BSP Male.
• Backing Rings Galvanized.
• Backing Rings EPDM.
• Full Flange Gaskets.
• Stub Flange Gaskets.
• Back Nuts PVC/ABS.
• Tank Connector PVC/ABS.
• Bush Concentric Plain Male X BSP Female.
• Adaptor Plain Male X BSP Female.
• Socket Reducing BSPF.
• Adaptor Plain Male X BSP Female.
• Bush BSP Male X BSP Female

Page 34 of Everyvalve.com for Prices.

PVC/ABS Threaded Fittings

• Sockets Plain Female.
• Tees Plain Female.
• Tees Plain Female X BSP Female.
• Elbows 90 Deg Plain Female.
• Elbows 90 Deg Plain Female X BSP Female.
• Elbows 45 Deg Plain Female.
• Unions Plain Female.
• Caps BSP Female.
• Nipples BSP Male.
• Backing Rings Galvanized.
• Backing Rings EPDM.
• Full Flange Gaskets Plain.
• Stub Flange Gaskets Plain.
• PVC Pipe Grade C, Grade D, Grade E, Grade T .
• ABS Pipe Grade C, Grade D, Grade E, Grade T .
• PVC Adaptor Plain Female X BSP Male.
• ABS Adaptor Plain Female X BSP Male.
• Socket Adaptor Imperial Female X Metric Female.

Page 35 of Everyvalve.com for Prices.

ABS - PVC Imperial & Metric Plain Bushes

• Plain Male X Plain Female Reducing Bushes.
• BSP Reducing Bushes & Sockets PVC.
• PTFE Tape.
• PP Pouring 6" Funnel.
• Cement PVC.
• Cement ABS.
• Silicone Grease.
• MEK Cleaner.
• Worm Drive Hose Clips 8MM & 12.5MM.
• Worm Drive Hose Clips.
• Unex Clips.
• Flat Rubber Gaskets.
• Maclow Pipe Clips.

Page 36 of Everyvalve.com for Prices.

Compression Fittings Mechanical Joints For MDPE Pipe

• Coupling.
• Adaptor with Female Threading.
• 90° Tee Threaded Female Off Take.
• Reducing Coupling.
• End Plug.
• 90° Tee.
• Joint with Flange.
• 90° Tee Threaded Male Take Off.
• 90°Elbow.
• Male Adaptor.
• 90° Elbow Threaded Male Take Off.
• 90° Elbow with Threaded Female off-take.

Blue and Black MDPE Pipe see special price list for all sizes 20mm to 300mm. Use pipe liners for 20mm to 63mm. Body Material Black PP & POM claws.

Threads are BSP where not stated. 'O' seals are in Nitrile rubber.

Page 37 of Everyvalve.com for Prices.

Electric - Pneumatic Actuators

1. Electric Actuator HQ4 To HQ6.
2. Electric Actuator HQ8 To HQ 300.
3. Electric Actuator EL300.
4. Pneumatic Actuator.
5. Limit SwitchBox IP67

Page 38 of Everyvalve.com for Prices