or Browse by category
JPR Electronics Ltd

JPR Electronics Ltd

Established for over 35 years JPR Electronics are an independent electronics distributor offering a wide range of components and assemblies, with a highly flexible approach to our customers needs.

  • Prices are amongst the most competitive available in the UK
  • All products supplied from stock. Schedules and call-offs are welcome.
  • Our full range of products can be viewed on our website. Orders can be placed online or by phone, fax or email for same day despatch.
Request a Quote

Filter products and services

  1. View all categories
  2. Cable Connectors
  3. Cable Glands
  4. Cable Ties
  5. Capacitors
  6. Circuit Breakers
  7. Diodes
  8. Enclosures
  9. Fuse Holders
  10. Fuses
  11. Inductors
  12. Lead Acid Batteries
  13. LED Illumination
  14. PCB Connectors
  15. Power Outlets & Sockets
  16. Power Relays
  17. Power Supplies
  18. Pressure Switches
  19. Resistors
  20. Rheostats
  21. Rocker Switches
  22. Rotary Switches
  23. Solar Panels
  24. Toggle Switches
  25. Transformers
  26. Wiring Components
Showing 39 of 1,278 Products

  1. Hammond 1550Z IP66 Diecast Enclosure

    Hammond 1550Z IP66 Diecast Enclosure
    Economical thick walled diecast aluminum watertight electronic instrument enclosure with natural finish. Rugged but easy to machine, two piece tongue & groove construction O ring seal for protection against access of dust and water to IP66.Lid screws are outside the gasket protection area to eliminate the need for "O" rings on the screws. Enclosure holes are pre-tapped. Gasket is pre-formed, one-piece silicone rubber. No internal ribs, enabling for easy installation of connectors without interference or additional milling.Hammond 1550Z series
    Request a Quote Supplied by JPR Electronics Ltd

  2. Hammond 1551 miniature enclosures

    Hammond 1551 miniature enclosures
    Miniature two part EnclosureMoulded in ABS Plastic in a choice of Black or GreyLap joint constructionDesigned to meet IP54Wide range of sizesMiniature enclosures moulded in a choice of either Black or Grey General Purpose ABS Plastic. Each Box features a satin texture finish and lap joint construction to protect against the access of dust and splashing water. Designed to meet IP54. Lid is secured with 2 self-tapping #4 x1/2" Screws. (Height includes Lid of 3mm)RoHS compliant
    Request a Quote Supplied by JPR Electronics Ltd

  3. Hammond 1551 series flanged enclosures

    Hammond 1551 series flanged enclosures
    Miniature Flanged Lid EnclosureMoulded in ABS Plastic in a choice of Black or GreyLap joint constructionDesigned to meet IP54Flanged Lid is perfect for wall or shelf mountingMiniature Flanged Lid Enclosures moulded in a choice of either Black or Grey General Purpose ABS Plastic. Each Box features a satin texture finish, 2 P.C. board standoffs moulded into the interior and lap joint construction to protect against the access of dust and splashing water. Designed to meet IP54. Lid is secured with 2 self-tapping #4 x1/2" Screws. Flanged Lid is perfect for wall or shelf mounting or suspending with a tie wrap.(Height includes Lid of 3mm)(Length does NOT include the flange)RoHS compliant
    Request a Quote Supplied by JPR Electronics Ltd

  4. Hammond 1553 series Enclosures

    Hammond 1553 series Enclosures
    * Ergonomically designed enclosures for hand-held comfort. * ABS plastic, overmoulded with a soft grey plastic edge grip. * Top cover is recessed for membrane, display or keypad. * PCB stand-offs moulded into the case. * Front panels removable, and all assembly hardware is included. * Available with or without battery door and compartment. * Battery compartment types include clips for 2xAA batteries, and PP3 9V battery clip. * Hammond 1553 series.RoHS compliant
    Request a Quote Supplied by JPR Electronics Ltd

  5. Hammond 1553T Enclosures

    Hammond 1553T Enclosures
    * Ergonomically designed for a comfortable fit into the user's hand. * Perfect for instrument or mobile data enclosures requiring a keypad and display. * Both the display and keyboard areas are recessed for membrane devices. * Molded from flame retardant ABS plastic, choice of black (RAL 9011) or grey (RAL 7035) - material carries a UL flammability rating of 94V-0. * Handheld section of enclosure includes a dark grey (RAL 7012) overmold, soft plastic grip. * Enclosure is assembled with M3-0.5 x 18 mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. * Integral brass bushings are factory inserted into top half of the enclosure (see photos). * Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54. * P.C. board standoffs are molded into case top & bottom halves (see drawings or photos for more details). * Battery door & compartment version (part numbers ending in "BAT") includes 8 battery clips (for 4 - AA batteries) and two 9 volt (PP3) battery clips. * Contains either one or two end panels (depending on version - see table below) - removable for easy modification. * Bottom half of enclosure includes molded in label recess on back (2.2" x 1.65"/56 mm x 42 mm).
    Request a Quote Supplied by JPR Electronics Ltd

  6. Hammond 1553 Watertight Enclosures

    Hammond 1553 Watertight Enclosures
    * Ergonomically designed for hand-held comfort. * Designed to meet IP65. Uses a one piece silicone gasket (installed). * utilises tongue & groove construction - molded into the top & bottom halves. * Choice of three sizes - in two colors. * Molded in general purpose ABS plastic with grey overmould, soft plastic grip. * Top cover is recessed for membrane display or keypad. * P.C. board standoffs moulded into both the top & bottom of the enclosure. RoHS compliant
    Request a Quote Supplied by JPR Electronics Ltd

  7. Hammond 1554 series watertight ABS Enclosures

    Hammond 1554 series watertight ABS Enclosures
    * Watertight Plastic Enclosure suited for mounting pcb's or DIN rail components * Designed to meet IP66 & NEMA 4, 4X, 12 & 13 * Moulded in General Purpose ABS Plastic. Watertight ABS enclosures ideally suited for mounting printed circuit boards or DIN rail mounted components. Colour is light grey (RAL 7035). Gasketed lid with two-piece "tongue & groove" construction provides protection against access of oil, dust and water. Designed to meet IP66 & NEMA 4, 4X, 12 & 13 ratings. Lid is secured with self-captivating - M4 stainless steel machine screws, threaded into integral stainless steel bushes (for repetitive assembly & disassembly). Internal features are maximised for mounting options. Moulded in DIN rail mounting tabs. Vertical P.C. card guides are moulded in.
    Request a Quote Supplied by JPR Electronics Ltd

  8. Hammond 1590 series Diecast Enclosures

    Hammond 1590 series Diecast Enclosures
    * Rugged, diecast aluminum alloy electronic instrument enclosures. * Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. * Natural vibra finished for a smooth surface with no sharp edges. * Quantity four (4) 6-32 x 1/2" machine screws secure lid (six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1), (eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details. * Designed to meet IP54 * Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.Hammond 1590 series
    Request a Quote Supplied by JPR Electronics Ltd

  9. Hammond 1590 series Flanged Diecast Enclosures

    Hammond 1590 series Flanged Diecast Enclosures
    Hammond 1590 series diecast aluminium emclosures with flanged lid * Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosures which are easy to machine. * Lap joint construction provides protection against access of dust and splashing water. * Flanged lid allows for easy mounting to walls or shelves & provides high security (as lid screws are hidden against wall or shelf). * These enclosures share the same body and features as the Hammond type 1590 enclosure except the lid is extended and four countersunk holes are cast into the flanges. * Vibra finished for a smooth surface with no sharp edges. * Designed to meet IP54 (gasket kits are available to meet IP66). * Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
    Request a Quote Supplied by JPR Electronics Ltd

  10. Hammond 1591 Multipurpose Enclosures

    Hammond 1591 Multipurpose Enclosures
    Hammond 1591 economy range enclosures manufactured from ABS and designed to meet IP54. * Ideally suited for vertical mounting of PC boards. * Integral card guides accept 1.5 mm (0.062") P.C. cards. * Lap joint construction provides protection against access of dust and splashing water. * Designed to meet IP54. * Moulded from easy to machine black ABS plastic material. Lid is secured with self-tapping (black) machine screws.RoHS compliant
    Request a Quote Supplied by JPR Electronics Ltd