Kingspan Renewables

0 PRODUCTS/SERVICES
- EMPLOYEES
- YEAR FOUNDED

Kingspan Hot Water Systems Ltd, part of Kingspan Renewables Ltd - a division of Kingspan Group plc, is a market leader in high performance hot water storage solutions in copper and 'Duplex' stainless steel materials throughout the UK and Ireland.

Leading industry brands include Range Cylinders, Albion Water Heaters, Copperform, Manco and Manchester Calorifiers. They offer open vented, unvented and thermal store solutions for Domestic Hot Water as well as stainless steel, mild steel and copper products for commercial, industrial and marine calorifiers in standard, bespoke and one-off designs.

Kingspan Solar, now also part of Kingspan HWS, offers air source heat pumps and total package solutions for domestic and commercial solar thermal hot water systems - from initial site survey, through system design and training to supply of the solar package. All designs are carried out by Coates Design Partnership, one of the UK’s leading consultancy practices and now part of Kingspan.

Domestic Vented Cylinders

Albion Water Heaters manufacture copper cylinders and thermal stores for Domestic Hot Water storage in a variety of sizes and patterns. The cylinders are specially designed for use in open vented hot water systems. They are designed to heat up quickly and to retain their heat for long periods.

Domestic Vented Cylinders

Ultrasteel Unvented Cylinders

Albion Ultrasteel unvented cylinders are manufactured from Duplex stainless steel, featuring superior corrosion resistance. They offer high flow rates for powerful showers and fast filling baths. As a result they provide mains pressure hot water around the home, which makes them suitable for use in buildings with multiple bathrooms. They offer fast reheat times and minimal heat loss from the stored water.

The range comprises 20 models in Direct and Indirect version and in a variety of sizes, including solar units to use with renewable energy sources. They are supplied as a complete package, which includes all components required to complete the installation.

All Albion Ultrasteel cylinders carry a 25-year anti-corrosion guarantee on inner container. The expansion vessel and cold water controls supplied with the unit carry a 5-year guarantee. All other components fitted to/or supplied with the cylinder carry a 2-year guarantee. 

Ultrasteel Unvented Cylinders

Mainsflow Thermal Store

Mainsflow is a thermal storage system, able to supply balanced mains pressure hot water and suitable for use in both new build and existing properties. Mainsflow combines the advantage of mains pressure hot water with the safety of traditional open vent storage in one versatile system. The units are supplied as a complete one box package to ensure simple and easy installation.

A selection of models is available to suit requirements of various applications. Mainsflow Contractor units are usually heated by traditional gas or oil fired boiler, however their flexibility and versatility allows for them to be used with alternative energy sources, such as solar or solid fuel. In addition to hot water, Mainsflow Contractor can also provide heat directly to space heating.

Mainsflow Electric Contractor is specifically designed to provide mains pressure hot water in properties, where a gas or oil supply is not available or where the installation of boilers is not practical. Easy to install and quiet in operation, Mainsflow Electric Contractor is the ideal choice for flats, apartments and all-electric buildings. 

Mainsflow Thermal Store

Industrial, Commercial and Marine Products

Albion Water Heaters design and manufacture a large range of open vented and unvented calorifiers for commercial and industrial use in copper, stainless steel and mild steel, as well as marine calorifiers and hot water provision for light commercial vehicles. All products feature high quality, durability and exceptional performance.

For maximum efficiency, units can be custom-designed for each specific application. A renewable heat source, eg solar panels, can also be incorporated into the system and sized to meet the heating and hot water requirements of the property.

Industrial, Commercial and Marine Products

Renewables Input Cylinders

Designed to use with renewable energy technologies, such as solar panels and air source heat pumps, the cylinders feature purpose-designed coils allowing maximum heat transfer of renewable energy into the stored water. They are an efficient and environmentally friendly way of providing Domestic Hot Water and cutting your energy bills.

The cylinders are manufactured from either copper - suitable for open vented or unvented systems, or Duplex stainless steel - suitable for unvented systems. With Direct and Indirect models and a range of capacities, there is a cylinder capable of fulfilling the needs of each application. 

Renewables Input Cylinders

Ultrasteel Standard Direct and Indirect

Standard unvented Albion Ultrasteel cylinders are offered in Direct and Indirect format. Direct models are designed to heat water with electricity via Long Life Incoloy immersion heaters. All units have 2 immersion heaters fitted - one to use in conjunction with 'low tariff' electricity and another to meet additional load. Direct units are suitable mainly for domestic use. Wide range of sizes available enables to meet various hot water demands and suit individual applications, from heating a single shower or bath, to providing enough hot water for up to three bathrooms.

Indirect models are designed to heat water via specifically designed coil-in-coil heat exchanger with conventional gas, oil or electric boiler. They have also an immersion heater(s) fitted for a back-up heating. Indirect units are suitable for both domestic and commercial applications. Wide range of sizes available enables to meet various hot water demands from heating a single shower to providing enough hot water for small hotels, guest houses or old people's homes.

  • Reheat time (measured from 15°C to 65°C after drawing off 70% of the capacity): From 45min to 132 min. (direct models) and from 16min. to 35min. (indirect models).
  • Insulation: 50mm-thick environmentally friendly CFC and HCFC-free polyurethane foam lagging.
  • Range of capacities: From 120 to 300 litres.
  • Guarantee: 25-year guarantee against faulty materials and manufacture on the stainless steel inner container. The expansion vessel and cold water controls supplied with the cylinder from January 2010 carry a 5-year guarantee. All other components fitted to/or supplied with the unit carry a 2-year guarantee.
Ultrasteel Standard Direct and Indirect

Ultrasteel Solar

Albion Ultrasteel Solar cylinders have been designed specifically with solar applications in mind. Featuring a purpose-designed solar coil, which allows maximum heat transfer of solar energy into the stored water, they are suitable for use with wide range of solar systems and are efficient and environmentally friendly way of providing Domestic Hot Water (DHW). They can also be used with another renewable energy source, such as air source heat pumps.

They are available in direct and indirect versions in a range of sizes. Where solar input does not fully meet the heating and DHW requirements, direct units have an electric immersion heater to meet the additional load. Indirect units use input from the householders' traditional heat source of gas, oil or electric boiler.

  • Insulation: 50mm-thick environmentally friendly CFC and HCFC-free polyurethane foam lagging.
  • Range of capacities: From 180 to 300 litres.
  • Guarantee: 25-year guarantee against faulty materials and manufacture on the stainless steel inner container. The expansion vessel and cold water controls supplied with the cylinder from January 2010 carry a 5-year guarantee. All other components fitted to/or supplied with the unit carry a 2-year guarantee. 
Ultrasteel Solar

Calorifiers

Albion design and manufacture a large range of calorifiers for commercial and industrial use. These products are made to the highest standards, and in line with our policy, the range is being developed constantly.

Albion offer a full design service and are able to respond promptly to specifiers, contractors and engineers. Skilled operatives ensure that the final product meets the customer's specification.

For maximum efficiency, a complete package can be custom designed for each specific application. A renewable heat source, e.g. solar panels, can be incorporated into the system and sized to meet the heating and hot water requirements of the property.

All designs and drawings are carried out by Coates Environmental & Renewable Design Partnership, one of the UK's leading consultancy practises and now part of Kingspan Hot Water Systems.

  • Calorifiers are available in a large range of sizes, in direct and indirect versions.
  • Thermal stores also available.
  • Manufactured in copper, stainless and mild steel.
  • Products include storage, semi-storage and non-storage vessels.
  • A full range of ancillaries available.
  • All products can be made to individual customer specification.
  • Open vented and unvented options available
  • British Standard grade A approved welders
  • All products are 100% tested.
  • All sites operate to ISO 9001:2000
Calorifiers

Aeromax Air Source Heat Pumps

A range of Aeromax Air Source Heat Pumps has been designed specifically for use in UK climates. By extracting heat from the air outside and utilising it to heat the home, Aeromax can supply up to 100% of space heating and Domestic Hot Water all year round. Compact and easy to install, they extract useful heat from the temperatures as low as -15°C and can provide hot water at 65°C without supplementary heating backup.

Suitable for use in new builds and existing properties, Aeromax are available in three outputs to suit individual requirements of each application and work efficiently with both radiators and underfloor heating.

Environmentally and pocket friendly, the heat pumps help reduce your carbon footprint as well as energy bills. Operating with very low sound levels, they are offered as complete package solution from initial advice and design, to training, technical and after sales support. 

Aeromax Air Source Heat Pumps
Can we help?