National Floor Preparation Centres Ltd
Preparation is the key to success in most things. But if you're in the flooring industry, Floor Preparation is the bedrock of all the work you do. The achievement of a first class finished floor relies on a stable, uniform platform. And such a critical task demands specialist skills and expertise. What's more, it requires high performance equipment that you can depend on.
NFPC Provides, customised hire packages designed specifically for the exacting demands of surface preparation. Backed by a service that reflects the special need of the industry.
You can feel safe using our hire equipment; all equipment is cleaned, serviced and PAT tested before being re-hired to you.
NFPC is proud to be a member of "The Hire Association of Europe" and to have attained "Safe Hire certification"; we are also proud to have been "CHAS" accredited and welcome regular assessments by them.
The FR200 is the original surface preparation machine. From its start as the world's first machine of its type, the FR200 has been renowned for its unrivalled versatility, performance and reliability. The FR200 has a reputation for setting the standard for robustness, ease of handling and maintenance. Drums can be changed within minutes to accommodate different finish requirements. All models can be fitted with dust extraction
The Rotamat RM-320 Planer apllications are:
Reduces operator fatigue
Fully adjustable depth control for fine work or aggressive grinding
Variable drive speed 0-5 metres per minute on concrete and asphalt.
Can remove road markings and thermoplastics.
Scabbling of concrete surfaces.
Cleaning and removing rubber, paint, oil, coatings and surface contaminates
STR701 Floor Grinder
For wet & dry grinding of concrete removes trowel marks or high spots
Nylon Wire Brush - perfect for brightening concrete and stained paint surfaces
Soft Nylon Brush
Ideal for wet or dry final cleaning
Flat Wire Planetary is ideal for aggressive removal of industrial grease and oil, built up graphite, laitence, green concrete. Exposes weak screeds and poorly adhered sub-floors
Available in various grit sizes removes latex, butyl rubber and ATA adhesives
Removes paint from case hardened power floated slabs and substrate contaminate from softer floors
Silicone Carbide Pad
For smaller areas of masonry grinding. Good key results for paint coatings on flat floors.
allows fine grinding for removing stain coats or spillages
Double Sided Tungsten Carbide Steel Disc's are ideal for grinding and texturing of concrete floors, Removal of rubber, Ice, Dirt and ATA Adhesives.
Our floor grinders are ideal for the removal of latence from concrete floors.
Our single head diamond grinder is the perfect machine with many possibilities. They operate at 2 speeds 1000 and 2000 rpm. The most advanced grinder on the market it can finish any type of floor surface and many types of tools are available for it. For instance, tools for grinding terrazzo, marble and granite. They are incredibly easy to work with. They can protect the environment with a dust free operation when coupled to the CFM317 vacuum and cyclone separator. The CG83/81 is especially well suited for cleaning concrete and power floated floors before painting or application of other floor coatings.
The CG83 Double Head Diamond Grinder, the machine with many possibilities. They operate at 2 speeds 1000 and 2000 rpm. The most advanced grinder on the market it can finish any type of floor surface and many types of tools are available for it. For instance, tools for grinding terrazzo, marble and granite. They are incredibly easy to work with and can protect the environment with a dust free operation when coupled to the CFM317 vacuum and cyclone separator. The CG83/81 is especially well suited for cleaning concrete and power floated floors before painting or application of other floor coatings.
For the removal of fully bonded floor coverings, the Turbo Stripper is without equal. It will strip up a floor more efficiently, more quickly and more easily than any other stripping machine. Will remove soft coverings, sheet vinyl, contract carpet, foam backed, jute and needle punch. Removes floor tiles including thermoplastics.
The approved Duro-Stripper is used on mid-range jobs for removing PVC, textile and cork floor coverings. The Duro can be operated as hand stripper or as floor stripper with extension handle.
The powerful 2000-Watts motor makes work efficient. The machine is equipped with a rugged
metal housing and special rubber bearings for rough conditions.
Kango 900 With Tile Lifter Attachment
Kango hammers have a long tradition within the demolition and combination hammer drill sector, and with the user an almost legendary reputation. They stand for substantial power of impact, highly robust design and long service life. They have always set the standards, in terms of power, robustness and service life, which others have found difficult to match.
Crete Angle Forced Action Mixers
Crete Angle Mixer "LD/LE" (Forced Action)
The CreteAngle® Multiflow Pan Type Mixer Model 'L' Heavy Duty has a complete and rapid mixing action achieving an amazingly high output.
This model can be transported and moved around the factory, building site or work area and can be moved through standard sized doorways.
The Model 'L' Heavy Duty can be fitted with a Pan Tipper which enables the material to be discharged into a wheelbarrow or onto the ground; the Pan Tipper handle is removable for transportation.
The mixing pan and blades are guarded with a safety head guard supplied with the mixer. The head guard has a mesh aperture through which additional material may be added and the mix viewed. Automatic power take-up is fitted as standard; mixing automatically starts and stops as the mixing head is lowered and raised.
Mixall Mixers are a most practical and efficient range of machines. They are small enough to be operated single- handed, but have a remarkably large output for their weight and size.
The equipment consists of a pail or drum inserted into a cylindrical cage, which is made to rotate by a motor and gear drive. Paddles are mounted on the frame of the mixer, with their blades inside the pail. As the pail rotates with the cage, the mix is agitated by the paddle blades and forces it into the centre of the pail. The solid blade paddle also pushes the materials upwards, whilst the perforated blade paddles increase the agitation by forcing the materials through its perforations.
The 32Ltr drums are easily replaced simply by lifting out of the frame, which makes it a very versatile machine for mixing different colour materials or changing from resins to adhesives, mortars or cements in seconds. These drums can be purchased separately if required
The Baron M300 provides all the power and efficiency you need. With an extremely powerful motor of 4KW the M300 is in a class of its own. The M300 gives you many significant product features and advantages. Combined with superior design, quality and durability, the choice is easy.
Stability achieved with 3 adjustable support legs
Large robust pneumatic tyres
Wheels can be removed without the use of tools
Electrical parts securely housed
Safe and systematic electrical wiring
The Blastrac 1-7D blast cleaning system is ideal for the preparation of surfaces in edges and corners and small surfaces. The 1-7D offers an affordable way for the cleaning, contouring and etching of concrete, asphalt, stone and steel surfaces.
The 1-7D is manually propelled for simplicity of operation.
Please note this product needs to be used in conjunction with the CFM317 Vacuum
The magnetic sweeper is a light weight yet powerful tube styled roller magnet for collecting excess shot and re-use.
CFM 317 Vacuum
The CFM 317 is an industrial vacuum cleaner with superior performance. Our industrial vacuums are manoeuvrable and robust, constructed of heavy gauge powder coated steel with chassis sitting on two fixed and 2 swivel wheels. Powered by 3 1.2 hp by pass motors which ensure a powerful answer to all your problems. The large surface area star filter ensures 100% efficiency until the container is 99.9% full
Kango 900 Breaker
Kango hammers have a long tradition within the demolition and combination hammer drill sector, and with the user an almost legendary reputation. They stand for substantial power of impact, highly robust design and long service life. They have always set the standards, in terms of power, robustness and service life, which others have found difficult to match
Our wall and floor chaser is a professional tool for cutting clean & precise grooves in one operation.
It has an integrated vacuum cleaner nozzle for less mess.
Current overload protection - integrated starting current overload protection and thermal overload motor protection.
Added control - Cut depth can be adjusted easily, precisely and securely.