Resin Building Products Ltd

Resbuild Gripfast is supplied in composite packs, each containing sufficient material to provide a slipresistant Epoxy coating system for 5 square metres of surface. Resbuild Gripfast is applied in a single coat operation which reduces the curing period of the system prior to trafficking. Apart from the excellent slip resistance characteristics, the coating system has very good abrasion and chemical resistant properties. The slip resistant aggregate consists of graded Aluminium Oxide.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Slip Resistant Flooring systems.

Epoxy resin and MMA resin based coatings, sealers, screeds, mortars and adhesives.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

The most common hazard in the work place is that of slippery floors. Equally areas used by the general public must be safe and meet the most stringent of requirements.

Resbuild SF Coating is a two pack Epoxy coating which provides protective and decorative properties to concrete, steel and other substrates. After mixing together, an easily applied chemical and abrasion resistant finish is produced. A slip resistant finish may be achieved by broadcasting an appropriate aggregate.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Resbuild MMA Primer has been developed as a general purpose primer, being used prior to any of the Resbuild MMA range of coatings, mortars, and screeds. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Resbuild MMA Primer has been developed as a general purpose primer, being used prior to any of the Resbuild MMA range of coatings, mortars, and screeds. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Resbuild DPM is a two pack Epoxy resin-based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. One or two coats may be applied depending on the degree of dampness present in the sub-floor. The product is available in grey, red, and clear colours to allow control of uniform coverage. Resbuild DPM is also suitable for priming damp, minimally prepared substrates.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Resbuild ET Coating is based on a solvent free Epoxy resin system modified with coal tar to impart water repellency and flexibility. Resbuild ET Coating is supplied as a two pack material in pre-weighed quantities ready for mixing and use. It may be applied direct to concrete or steel, or else used in conjunction with a substrate specific primer.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Resbuild MMA Flexgrip is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties. The flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin. Resbuild MMA Flexgrip allows a fast return to service. Resbuild MMA Flexgrip is also available in Concrete grade for Concrete and Cementitious surfaces.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk

Resbuild MMA Flexgrip is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties. The flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin. Resbuild MMA Flexgrip allows a fast return to service. Resbuild MMA Flexgrip is also available in Concrete grade for Concrete and Cementitious surfaces.

Contact us on +44 (0) 1302 300822 or email us at enquiries@resbuild.co.uk