Rheintacho UK Ltd

The Rotaro T digital hand-tachometer is a device for measuring rotational speed and velocity, as well as length. The compact device has two measuring methods. One is optical, and therefore non-contacting; the other is mechanical using an adapter and various probes. With the optical method, it focuses a beam of light at a thin sticker attached to the object, which reflects it at the speed of rotation. The result appears immediately on the 5-digit LCD. The distance between the rotaro T digital hand tachometer and the test object can be up to 600 mm. The Rotaro T comes with a special adapter which is used to guide yarn, thread, rope etc.

The Rotaro Tw digital hand-tachometer is a device for measuring rotational speed and velocity, as well as length. The compact device has two measuring methods. One is optical, and therefore non-contacting; the other is mechanical using an adapter and various probes. With the optical method, it focuses a beam of light at a thin sticker attached to the object, which reflects it at the speed of rotation. The result appears immediately on the 5-digit LCD. The distance between the Rotaro Tw digital hand tachometer and the test object can be up to 600 mm. The Rotaro Tw comes with a special adapter to enable the measurement in connection with welding wire and is the perfect fit for typical applications such as calibration, service and maintenance work within the welding and wire industry.

The Rheintacho rotas programmable rotary speed monitor is a pulse value system - its primary application is to monitor rotary speed and velocity based on period duration measurement. If the upper or lower thresholds are exceeded, it actuates relay outputs according to the set commands. There is also a version with a scalable current output for analogue measured values.

Stroboscopes are versatile instruments for the visualisation of very fast movements. They are important and necessary tools for the inspection and control of machines and manufacturing lines, e.g. in printing or textile industries. Stroboscopes could also be used for the non-contact measuring of rotational speed. If the stroboscope flash frequency matches the frequency of movement, the test object appears stationary. It can be observed and its frequency of movement recorded. Rheintacho offers stroboscopes in different design and technologies. For every single application the right tool for you. The RHEINTACHCO family of LED stationary stroboscopes which encompasses 3 sizes, namely a 3000, 5000 and 7000 LED Strobes, cover a wide variety of web widths and can also be liked together to increase flexibility of use in different specific conditions. A 10000 LED version is also available on request.

* Exceptional light intensity * High image definition * Homogenous illumination area * For web widths > 300 mm strobes can be connected in parallel * High light-intensity and extremely short flash time, the best technology for perfect sharply defined images High light performance Thanks to the large, homogenous illumination area, you get outstanding results even in unfavourable light conditions. This makes the RT STROBE 3000 ideal for a wide range of measurement, observation and inspection tasks. Especially suitable for difficult tasks, such as applications in the printing industry.

RT STROBE control is your easy-to-handle control centre for any stroboscope, whether it is from Rheintacho or another manufacturer. Use it to create a trigger signal or to influence a signal generated externally. The multiplicity of control parameters make it easy for you to carry out the inspection or measurement tasks required of you. See a selection of typical cases below

The smart solution to adjust the flash frequency of your RT STROBE 3000 or RT STROBE 5000. With the RT STROBE eco control it is also possible, to control multiple, parallel connected RT Strobes.

Rheintacho tacho generators reliably measure the rotational speeds of motors. The rotation is mechanically transferred directly via a shaft to the sender. At the output of the sender there is an electric signal proportional to the rotation. The signal is then normally transferred to a Rheintacho indicator system. The senders are available with a normalized voltage, current or pulse output, which means that the right model can be chosen for a wide range of indicator and control units. Rheintacho also offers custom solutions adapted for the application.

Foundrometers manufacture a wide variety of tacho generators and tacho alternators. These produce AC or DC signals which can be used to drive analogue indicators or control devices. Whilst these signalling devices are best suited to Foundrometers indicators and controllers, they can be used to drive any other manufacturer's instruments.