Samco Silicone Products


Silicone tubing

With a huge range of sizes available, SAMCO can manufacture to your required specification and offer advice on suitable material grades. All of our silicone tube meets FDA 177.2600 Certification. We also offer a cut to length service on all sizes. SAMCO can offer silicone tubing for general purpose, high strength grade, platinum cured and can be purchased in a wide variety of colours.


Reinforced Hose FDA Approved

SAMCO offer a quality silicone reinforced hose that enables use to high temperatures and pressure. Fibreglass is embedded in between the layers of silicone to create an extremely flexible and strong tube. This type of hose meets FDA 177.2600, EP VI.1.2.3 WRC Approved Elastomer.

USP class VI Platinum Reinforced Hose

From all the success SAMCO have had with the platinum extraflex hygienic range, we felt it was time that we started supplying the same grade in our extruded glass fibre reinforced hose. We can now offer all sizes shown on our website along with our peroxide range where USP Class VI is not as critical.

Suction and Delivery Hose

SAMCO mandrel built hygienic suction and delivery hoses are designed for 10 bar working operation and are specifically built for 'clean' industry product transfer beyond the capability of our extruded reinforced tubing range. Hygienic suction and delivery hoses are manufactured to FDA, USP class VI and WRC approved materials.

Silicone Extrusions, Profiles and Cord

These silicone extrusions can be designed around the customer and their requirements, such as colour, shore hardness and whether the run is platinum cured, flame retardant or just standard.

Our silicone cord is available in a variety of sizes, colours and grades to help meet individual needs. Large volumes are stocked in white 60 shore and is FDA approved. This cord can be joined to make an O-ring if required

Silicone Sponge

SAMCO is renowned for its quality silicone sponge products. Roll sizes are 1m wide x 10m long, these thicknesses range from 2mm up to 25mm. Sheet sizes are 1000mm x 600mm, thicknesses ranging from 1.6mm to 35mm.

Sponge cord sizes range from 2mm diameter up to 70mm diameter with smaller sizes supplied in 50m coils. Larger sizes can be supplied in 1m lengths to keep the cord straight.

We also offer silicone sponge sections which we hold stock in a variety of sizes with the standard coil length being 10m but longer lengths available, depending on size, hardness and colour. Adhesive backing available on all sizes.

Silicone Solid Sheeting

SAMCO supply FDA approved Silicone sheeting to customers all over the world. Silicone sheet has a growing popularity within the market place, especially in the field of gaskets and seals. Standard sheeting is available in translucent, white and red iron oxide and in typical roll sizes of 1200mm wide and 10m long.

Precision Mouldings

High volume mouldings for the automotive, aerospace, medical and consumer electronics industries. Low volume moulding for development and small production runs. SAMCO offer compression, transfer and injection moulding. Our advanced engineering tools ensure the highest standards of precision and cleanliness. Our commitment to early design liaison and quality and innovation has resulted in many cost effective designs.

Specialist Hoses and Vacuum Tubing

SAMCO Silicone Products hand manufacture a vast range of silicone hoses for non automotive applications. Having over 15 years experience we feel confident in fulfilling any requirements that you may have. Working alongside our sister company, SAMCO SPORT, places us in a strong market and technical position. Typical markets include the MOD, Agriculture, London Underground, and many more

Silicone Gaskets

In-house punched gasket service available. Material is typically silicone sponge or solid sheet that can be adhesive backed on one or both sides offering flexibility to seal in extreme environmental conditions. Forme tools, either single or multiple impression, can be made to your specification, or drawing, at low cost and short-lead times. Alternative gasket materials include; PTFE, neoprene, EPDM, Viton or Nitrile.

Silicone for adhesion and sealing

Ready to use one-part adhesives and sealants. Curing to a high resilient silicone rubber when exposed to air. For silicone-to-silicone bonding, sealing against contaminants, electrical insulation or formed in place gaskets.

82.8ml tubes or 304ml cartridges available

Can we help?