Techniquip Ltd

0 PRODUCTS/SERVICES
- EMPLOYEES
- YEAR FOUNDED

Techniquip Ltd., established 1988, was formed to satisfy a growing market requirement for “off-the-shelf” process instrument together with direct lines of contact and good technical support. Our expertise and technical support provides our customers with the opportunity to access a specialist single source supplier, for quality, cost effective instrumentation solutions and services for Flow, Level, Pressure, Temperature. We are also a major supplier of LPCB and FM approved flow meters to the fire sprinkler industry. By keeping abreast of industries innovations in leading edge technology, we are able to bring our customers the best possible solutions which combine quality, reliability and performance at a low cost of ownership.

 

Compressed Air Flowmeter Model VA520

The VA520 is not only suitable for compressed air measurement but can also handle such gases as nitrogen, oxygen and CO2 Installation of VA520 can be carried out easily and quickly. Should the sensor require removal for calibration or cleaning purposes this can be done without removing the complete measuring section from the pipeline.


VA520 Features

NEW High accuracy sensor..
Easy and affordable hot tap installation
Display engineering units are keypad selectable (m3/h, m3/min, l/min, l/s, kg/h, kg/min, kg/s, cfm)
Accuracy +/- 1.5% of m.v +/- 0.3% of FS
4-20mA and pulse outputs (galvanically isolated) as standard
Digital Output RS458 Interface, Modbus RTU
Negligible pressure loss
No moving parts
No additional temperature or pressure sensors necessary
Gas type software selectable (nitrogen, oxygen, CO2, Argon, Helium)

Compressed Air Flow Meter Model VA500

VA500 Insertion Type Compressed Air Flow Meter for larger pipes. Includes 2 x 4 - 20mA outputs. One for flow and one for temperature. Also offered is an optional local display. Can be installed in pipes from 50mm Dia upwards

VA500 Features

NEW High accuracy sensor gives potential of 1000:1 turndown.
Easy and affordable hot tap installation
Display engineering units are keypad selectable (m3/h, m3/min, l/min, l/s, kg/h, kg/min, kg/s, cfm)Depth scale for accurate installation
Accuracy +/- 1.5% of m.v +/- 0.3% of FS
4-20mA and pulse outputs (galvanically isolated) as standard
Digital Output RS458 Interface, Modbus RTU
Measuring section option for even greater accuracy
Negligible pressure loss
No moving parts
No additional temperature or pressure sensors necessary
Gas type software selectable (nitrogen, oxygen, CO2, Argon, Helium)

 

 

Low Cost Compressed Air Flow Meter - MCF

MCF - Low cost thermal mass flow meter for clean compressed air or Nitrogen. One if the most cost effective units available today. Most common sizes always available from stock. An ideal instrument for monitoring compressor performance, plant leakage or even machine consumption.

 

Specification

Pipe Sizes From 1/4" to 2"
Flow Range 0 - 200 l/min to 0 - 24000 l/min
Accuracy class +/- 5% of Reading
Temp range -10 to + 60oC
Max Pressure  1 Mpa
Connection Screwed 1/4", 1/2",1" 11/2" or 2" BSP Female
Wetted Body, Anodised aluminium
Housing PPO
Supply 24 vdc @ 120mA
Outputs 4 - 20mA, pulse
Display Rate and Total Flow with High Def LED
Protection IP65

Product Information - PDF

ATEX Approved flowmeter for Gases

VA 550/ 570 flowmeters are suitable for demanding industrial applications. An ATEX version is available for applications in hazardous areas.

Contrary to the previously used bridge circuit the newly developed electronics records all measured values digitally. This allows  very precise measurements with a wide temperature range of up to 180 °C (resp. 350 °C).
The measuring span is 1...1000 and enables measurements with low velocities all the way up to 224 m/s.

VA 550/ 570 has an integrated Modbus output as a standard with which all parameters Nm³/h, Nm³, Nm/s, Nl/min, Nl/s, kg/h,kg/min, ft/min, °C etc. can be transferred. All parameters can be
adjusted directly at the instrument (via display) or via the PI 500 hand-held measuring instrument.There are also 2 x 4 - 20mA analogue outputs for flow and temperature monitoring together with a galvanically isolated pulse output for monitoring totalised flow.

Remote diagnosis can be carried out via Modbus and all relevant parameters can be checked and changed if necessary. So it is possible to change many parameters including Gas Type, Pipe ID, Scaling, Zero Point etc.

Via remote diagnosis and status update e. g. temperature excess, failures of the sensor or the
calibration date can be determined.

Glass Tube Flow Meters Rotameter Type

A range of traditional panel mounting flow meters with In-Line or rear facing connections. We stock a comprehensive range Standard scales for Air, Water and common gases. Also available on special order are Custom scales for alternative liquids and gases and gas mixes. Options include Adjustable alarms, 2 wire, 4 - 20mA transmitters and integral needle valve. End connections are available in Nickel Plated Brass or St. Steel material.

Specification (Standard Units)

Gas ranges 5cc/min - 100 l/min (Air equiv)
Liquid ranges 2cc/min - 4.4 l/min (H2O equiv)
Scale length 30 and 100mm
Accuracy Class 2.5 VDI/VDE
Temp Range -15 to 120 oC
Pressure 20 barg max - non shock
Connections ¼” BSPF In line or rear facing
Conn Mat’l Nickel Plated Brass or St Steel
Seals Viton
Tube Borosilicate Glass
Float St Steel, Anodised Aluminium or Acetal

Options

Needle Valve Integral Valve with rear facing connections
Alarm Infra-red sensor with relay PSU module
NEW  2- wire 4-20mA Transmitter (Click) (See digital panel meters for indication options.)

Product Information - PDF

 

 

ATEX Approved Pressure Switch

A comprehensive of ATEX approved Explosion Proof Pressure Switches

Petrochemical industry, Process technology

Explosion Proof EExd IIC T6
Pressure Ranges From 0.001 to 10.5 barg
Fluid Temp Range -40 / +70oC
Repeatability +/-1%
Contact Ratings 10 Amp @ 250 VAC
Connection 1/4" NPTF
Elect Conn Terminal Block via Cable gland
Housing Mat'l Aluminium anodised and laquered
Wetted Parts St Steel
Protection IP 65

 

 

 

LPCB Approved Flow meter

FIRESURE - LPCB Approved Flow meter for Sprinkler Systems  - Ex Stock

The LPCB approved Firesure Flowmeter distributed by Techniquip Ltd has been a market leader for many years .The Firesure flowmeter is the preferred option for fire sprinkler systems and building management schemes. It has been designed specifically to meet the requirements for a direct reading flowmeter as used in automatic fire sprinkler and deluge systems.

Line Sizes: 50, 80, 100, 150 & 200mm
Ranges: 5 ranges,
Accuracy: ± 5% of flow reading
Pressure: 16 barg (with x 2.5 safety factor)
Temperature: Maximum operating 90ºC
Certification: LPS 1045 / UKAS flow certification
Process Connections: Traditional Flanged and Victaulic Grooved
Materials of Construction: Orifice Plate: 316 stainless steel
Carrier: Polyester coated carbon steel
Flow Indicator: Nickel plated brass
Borosilicate Glass
Viton Seals
Stainless Steel elements
Filter bowl / Polycarbonate
Indicator Connections: Nickel plated copper tube

LPCB Approved with extended Flow Ranges
Flanged or Grooved Connections
FIRESURE X with "long reach" meter assembly
Ex Stock availability

FM Approved Flow Meter - FIRESURE

FM Approved Flow Meter - FIRESURE

In addition to the standard range of InFlux Firesure LPCB approved flowmeters already held in stock by Techniquip Ltd.

The NEW FM Approved flow meter will also now be held in stock.

FIRESURE - A range of FM Approved flowmeters for use in sprinkler fire protection systems.

[ExStock]

Line Sizes: 80, 100, 150 & 200mm
Ranges: 200 USGPM (400 dm3/min) up to 400O USGPM (15000 dm3/min) Dual Scaled.
Accuracy: ± 2% of full scale demand
Pressure: 20 barg
Temperature: Maximum operating 90ºC
Process Connections: Traditional Flanged and Victaulic Grooved
Materials of Construction: Orifice Plate: 316 stainless steel
Carrier: Polyester coated carbon steel
Flow Indicator: Nickel plated brass
Borosilicate Glass
Viton Seals
Stainless Steel elements
Filter bowl / Polycarbonate
Indicator Connections: Nickel plated copper tube

FM Approved
Flanged or Grooved Connection options
Low Cost Alternative

Electronic Pressure Switch / Transmitter BPS3000

Compact and modern design
The new BPS3000 is characterised with panel height of 99 mm and diameter of 40 mm which enables compact installation of many switches. Its angled top design is aesthetically pleasing and a real functional highlight.

High protection with IP65/IP67 and EMI protection
Harsh environmental circumstances, with dust or water being present are not a problem for the BPS3000. Continued functionality will be achieved by a sophisticated housing seal and a keypad integrated within the plastic housing. The high EMI protection of the BPS3000 allows installation in environments where high power walkie – talkies are in use e.g. in the steel and power industries.

Features
¿ Measuring ranges: 0...10 bar to 0...600 bar gauge
¿ max. 2 switch points
¿ Analogue output 4 - 20 mA or 0 - 10 V
¿ Rotatable 320° display & electrical connection
¿ Menu navigation refers to VDMA standard
Applications
¿ Machine tool industry
¿ Hydraulic & Pneumatic
¿ Injection moulding machines
¿ Lubrication monitoring

Product Information - PDF

Electronic Temperature Indicator switch transmitter

BTS3000 Electronic Temperature Switch / Transmitter

ATEX Approved Temperature Switches

Features

Local mount type single switch with explosion proof housing
Terminal clip integrated, set point adjustment in °C and °F
under tamper protected cover
Protection class: IP65, NEMA 4 / 7 / 9
Adjustable hysteresis (deadband), S-micro switch
Optional thermowell: W = Brass WS = Stainless steel SS316Ti, 1.4571
Approvals: Ex d, Ex ia, UL, CSA

All Plastic Tube VA Flowmeter - Rotameter Type

All plastic, variable area, flowmeter, for Air and  Water flows. Robust construction with rigid PVC end connections in either screwed or solvent socket weld format. The flow tube is manufactured in Polyamide material as standard with PVC and Polysulphon available for specific applications. Alternative fluid scales can be supplied on request.

Features

Air  ranges 0.2 - 1500 Nm3/hr  Air
Water ranges 3 - 50000 l/hr H2O
Accuracy +/- 1.2% reading +/- 0.4% FS
Temp Range 75oC (Polyamid)
Pressure 10 barg max - @ 20oC
Connections Screwed BSPF or Socket
Conn Mat’l PVC
Seals EPDM
Tube Polyamid
Float PVDF

Options

Conn Mat’l    St. Steel inserts
Alarm Bi-Stable  volt free contact
2- wire 4-20mA Transmitter (See digital panel meters for indication options.)

 

 

Plastic Tube VA Flow meter Rotameter Type

Plastic Tube Flow Meter (Rotameter Type)

This "High capacity, Low cost "Open Frame", high visibilty flow meter comes with In-Line connections. The Fluxline plastic tube meter offers Standard Scales for Air and Water with custom scales for alternative liquids and gases an option. With 1/2" or 1" BSPF connection, Low pressure drop is an imporatant feature. Adjustable alarms and separate inline needle valve are also available.]

Features

Gas ranges 10 - 600 l/min (Air equiv)
Liquid ranges 0.6 - 40 l/min (H2O equiv)
Scale length 100 and 140mm
Accuracy Class 2.5 VDI/VDE
Temp Range  60 oC max
Pressure 8 bar max @ 20oC, 3 bar max @ 60oC
Connections 1/2” or 1" BSPF In line
Conn Mat’l Nickel Plated Brass (1/2"only) or St Steel
Seals Nitrile
Tube Acrylic
Float St Steel or Anodised Aluminium

Options

Alarm Volt free bi-stable reed switch
Alarm Infra-red sensor with relay PSU module

Can we help?