CSS Worksafe Ltd

The gate opening of the RGK10 means that this item is normally used for clipping directly into a dee ring on a harness.Normally fitted to fall arrest blocks or fixed lanyards. The double action snap closure on this device means that it cannot be accidentally openedtion snap.

Smartline Rescue Kit strong.EN 341 Class .The smartline rescue kit is a personal - single use device, to descend by the user to safety or can be used to lower another person to safety.Available in a length of 15 Mtrs.Standard lengths for all systems are available as listed, other lengths are available to special order.Users of all rescue systems / kits should receive relevant training.

The CSP8 is a multi purpose work-positioning device, designed to be clipped to the side dees of a harness or work positioning belt or used independently.The CSP8 is used extensively by the Satellite & Aerial installation industry as a temporary anchorage for use with chimney stacks. The 'Chimney Strop' is looped and 'thrown' over the top of the stack. The length is easily adjusted by the zinc plated rope grab.

The RGK 1 is the workhorse of the industry, used from rope access, to fall arrest applications. This item is also used in the leisure industry for caving and rescue.The screwgate closure on this device means that the user must manually lock the RGK1 after fitting.

This tool hook can be fitted to most 45mm harnesses by threading it through the straps.The large gate opening and ability to swivel, make it ideal for securing large tools whilst working at height. Used in the industry by mast riggers and rope access technicians.

The RGL9 has a similar specification to the RGL6 (see data sheet), and is supplied in two lengths measured at full expansion: 1.3 Mtr/1.8 Mtr.The RGL9 is a twin leg lanyard, the extra leg allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. When used in conjunction with two Girder Slings (RGK26), the RGL9 can be used as a means of progression through suitable structures where no fixed lifeline or eyebolts are available. The elastication in the lanyard reduces the amount of hanging slack in the lanyard, which can be helpful when working in tight spaces to help reduce trip hazards and entanglement

The RGL3 is supplied in two standard lengths: 1.3 Mtr / 1.8 M. The RGL3 is a twin leg lanyard. With the same specifications as the RGL 1 (see data sheet), the extra leg allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. When used in conjunction with two Girder Slings (RGK26), the RGL3 can be used as a means of progression through suitable structures where no fixed lifeline or eyebolts are available. The ¿Soft Edge¿ webbing used in the manufacture provides greater strength, wear and shear resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product.

The RGL4 is supplied in a 450mm length and is normally used as an extension strop fitted to the rear dee ring of a full body harness. When used in this manner, it allows an operative to self-connect to a fall arrest block (RGA1-8) by extending the attachment point on the harness, and bringing it into the field of vision. The ¿Soft Edge¿ webbing used in the manufacture provides greater strength, wear and shear resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product.

The RGL1 is supplied in two lengths: 1.3 Mtr / 1.8 Mtr. The RGL1 lanyard is an industry standard, and normally the minimum equipment issued with a harness for working at height. The ¿Soft Edge¿ webbing used in the manufacture provides greater strength, wear and shear resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product. This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. If movement between anchorages is required, a twin leg lanyard should be used (RGL3), to provide constant protection.

The RGL5 is a restraint lanyard, and is supplied in any length up to 2 mtrs to act as a leash for an operative working at height.It is important to understand the principles of ¿fall restraint¿ as the RGL5 can only be used for Fall Restraint, as there is no shock absorbsion built into the system. If there is any possibility of an operative stepping/falling over an exposed edge, or falling through a fragile surface, a Fall Arrest product should be used. The ¿Soft Edge¿ webbing used in the manufacture provides greater strength, wear and shear resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product.The RGL5 should never be used to extend another fall arrest product.