Drayton Tank and Accessories Ltd

Made from Food Grade medium density polyeUrethane, supplied in Opaque white with volume measurements moulded in to the side of the tank. 10,000 Ltr Nominal Capacity (2200 Gallons) Go to Tank Size Chart Supplied with: 500mm Screwed Cap Dims (Diam * H): 2450* 2753mm. Suitable for: Cold Water DT CLASS 4 Solutions Go to Our Solution Selection Page Usual Delivery of this item is 3-5 working days

Made from Food Grade medium density polyeUrethane, supplied in Opaque white with volume measurements moulded in to the side of the tank. 10,000 Ltr Nominal Capacity (2200 Gallons) Go to Tank Size Chart Supplied with: 500mm Screwed Cap Dims (Diam * H): 2000* 3684mm. Suitable for: Cold Water DT CLASS 4 Solutions Go to Our Solution Selection Page Usual Delivery of this item is 3-5 working days

High Grade Polyethylene waste oil storage tank 110% Bunded Go to Fuel Tank Regulations Bund Type: Top fill and Bottom empty' :- B1 type 'Top fill and Top empty' :- B2 type. Supplied with: lockable port hole male bsp filler point 100mm inspection hole; female bsp hole 32mm hole to accommodate the latest electronic alarms. B1' type bunds also supplied with :- female bsp outlet Dimensionss (L*W* H): 1890 * 640 * 1350mm OFTEC Certificated All Fuel tanks must be installed in accordance with prevailing legislation and OFTEC guidelines. Drayton Tank Accessories Ltd will not be responsible for installations that do not conform to OFTEC guidelines. If in doubt contact OFTEC (www.oftec.org) or your environment authority. Usual Delivery of this item is 10-15 working days

High Grade Polyethylene Fuel storage tank 110% Bunded Go to Fuel Tank Regulations Bund Type: Top fill and Bottom empty' :- B1 type 'Top fill and Top empty' :- B2 type. Supplied with: lockable port hole male bsp filler point 100mm inspection hole; female bsp hole 32mm hole to accommodate the latest electronic alarms. B1' type bunds also supplied with :- female bsp outlet Dimensionss (L * W * H): 1890 * 640 * 1350mm OFTEC Certificated All Fuel tanks must be installed in accordance with prevailing legislation and OFTEC guidelines. Drayton Tank Accessories Ltd will not be responsible for installations that do not conform to OFTEC guidelines. If in doubt contact OFTEC (www.oftec.org) or your environment authority. Usual Delivery of this item is 10-15 working days

Made from approved Glass Reinforced Plastic (GRP) materials, with a smooth internal gelcoat surface. 1000 Ltr Nominal Capacity (220 Gallons) Go to Tank Size Chart Int Dims (L * W * H): 1000 * 1000 * 1000mm. Ext Dims (L * W * H): 1150 * 1150 * 1100mm Suitable for: Water upto 100 DEG C Go to Our Solution Selection Page Usual Delivery of this item is 7-10 working days

1000 Litres Nominal Capacity Chemical One Piece Tank

Chemical One Piece Storage Tank Manufactured to BS EN 13280, made from Approved Materials,

Internal Dimensions (L x W x H): 1000 x 1000 x 1000mm

External Dimensions (L x W x H): 1170 x 1170 x 1100mm

Manufactured with GRP Resins that are designed to withstand water temperatures up to 120 Degrees C, and suitable for Storage of most Chemical Solutions.

The tank has Insulation encapsulated into the tank walls and Lid with various insulation thickness, as a result the external finish is cleaner and the thermal value can be designed to suit the needs of the customer, from keeping a solution at a lower temperature or providing sufficient insulation for thermal stores etc.

Supplied with a Flange around the top of the tank  with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects.

For more information on Chemical Storage Regulations please Click Here

Litres are Nominal Capacity (to the Brim of the Tank)

Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base.

There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base.

There is a 25mm radius at the edge of each wall of the tank and also onto base.

A Usual Lead time for the tank is shown on this product, please check with us as this lead time can increase at busy times.

For more size options available on our standard tank sizes please Click Here

Made from approved Glass Reinforced Plastic (GRP) materials, with a smooth internal surface. Externally pigmented for preventing light penetrating into the tank. 1000 Ltr Nominal Capacity (220 Gallons) Go to Tank Size Chart Supplied with: Option for 25, 50, 75 or 100mm 600*600mm Access Hatch. Thick Insulated Walls. Insulated Bolted Lid. Foam Lid sealer. Int Dims (L * W * H): 1000 * 1000 * 1000mm. Ext Dims (L * W * H): 1150 * 1150 * 1100mm (Including Lid) Suitable for: Water upto 100 Deg C DT CLASS 3 Solutions Go to Our Solution Selection Page Usual Delivery of this item is 7-10 working days

Made from approved Glass Reinforced Plastic (GRP) materials, with a smooth internal gelcoat surface. 1000 Ltr Nominal Capacity (220 Gallons) Go to Tank Size Chart Int Dims (L * W * H): 1000 * 1000 * 1000mm. Ext Dims (L * W * H): 1150 * 1150 * 1010mm Suitable for: Water upto 70 Deg C Go to Our Solution Selection Page Usual Delivery of this item is 7-10 working days

Made from approved Glass Reinforced Plastic (GRP) materials, with a smooth internal gelcoat surface. preventing light penetrating into the tank. 1000 Ltr Nominal Capacity (220 Gallons) Go to Tank Size Chart Supplied with: Bolted Lid. 600*600mm Access Hatch. Foam Lid sealer. Int Dims (L * W * H): 1000 * 1000 * 1000mm. Ext Dims (L * W * H): 1150 * 1150 * 1100mm (Including Lid) Suitable for: Water upto 70 Deg C DT CLASS 2 Solutions Go to Our Solution Selection Page Usual Delivery of this item is 7-10 working days

1000 Ltr F&E Preinsulated One Piece GRP Storage Tank

F&E Preinsulated One Piece Storage Tank Manufactured to BS EN 13280, made from WRAS Approved Materials

Internal Dimensions (L x W x H): 1000 x 1000 x 1000mm

External Dimensions (L x W x H): 1170 x 1170 x 1100mm

Manufactured with GRP Resins that are designed to withstand water temperatures up to 90 Degrees C, finished with a Gelcoat internal surface to prevent bacterial growth and importantly helps to keep the water as clean and fresh as possible.

The tank has Insulation encapsulated into the tank walls and Lid, as a result the external finish is cleaner.

 

Supplied with a Flange around the top of the tank  with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects.

 

Balance Tanks are designed to ensure that the water in the pool is kept at the correct level

Swimming pool balance tanks need to be emptied and cleaned on an annual basis, whilst spa pool balance tanks requiring cleaning on a weekly basis

For more information on Feed and Expansion Tanks please Click Here

 

Litres are Nominal Capacity (to the Brim of the Tank)

Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base.

There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base.

There is a 25mm radius at the edge of each wall of the tank and also onto base.

A Usual Lead time for the tank is shown on this product, please check with us as this lead time can increase at busy times.

For more size options available on our standard tank sizes please Click Here