Dragons Breath Solar

  • Bridge Innovation centre
  • Pembrokeshire Science and Technology Park
  • Pembroke Dock
  • Pembrokeshire
  • United Kingdom
  • SA72 6UN (map)

  • Tel: 01646 600151
  • Website: www.dragonsbreathsolar.co.uk

Solar Battery Storage


When it comes to getting the most from renewable systems, a good quality photovoltaic panel is essential to generate power towards battery storage. We can supply all of the essentials to run a house, caravan, cabin, houseboat or allotments where stored electricity is needed to power LED lights household utilities, white good or tools.

Our pre-assembled kits are prepared within a bespoke weather proof cabinet IP64, with our customer in mind to offer a safe plug and play design that meets with electrical safety regulations. These are used in conjunction with quality control equipment and inverters to provide an instant supply for demands. Kits include MPPT controllers, 12 or 24v inverters, display for optimum battery state of charge, circuit breaker and fuse protection. These kits are ideal for those who want to merge self consumption with battery backup/storage.

Voltage control equipment is provided to match systems that require sophistication with MPP tracking sensors; these are used for optimum battery performance. Power packs are specifically designed to perform well in long duration's during loads discharging and operating under extreme conditions. We supply a range of specially designed home energy kits.

Low voltage PV modules can be used for an uninterrupted power supply (UPS) providing maximum charging power for remote off-grid locations. This equipment under normal workloads will last for many score years to provide the very best outback battery powered performance. We only use the very best generator materials guaranteed to provide long lasting electric power requirements.

Solar Hot Water Spares


We offer individual parts for roof or ground mounted solar heating collectors, single run stainless steel pipe work for improved efficiency. DZR brass tube fittings for high temperatures, actuated zone valves, expansion vessels, pump stations, solar fluids, and specially developed products to improve flows when installing any high pressure hot water system.

In essence we provide every conceivable part to service or repair glycol heating systems. See this link: Download our FULL SOLAR HEATING SPARE PARTS: CLICK HERE TO DOWNLOAD - SOLAR HEATING SPARES

If you are unable to find the part required, please send an email requesting information about the problem you are looking to overcome. CONTACT US USING THIS LINK 

Solar Heating Components


Each component part of your glycol heating system should be checked at least once a year to make sure that the system is working efficiently. Your solar collectors heat glycol fluids which, are then passed through to a pump station usually in one piece stainless steel pipe work. This pump is governed by a controller that uses two sensors, one in the collectors and a sensor on the cylinder. This then will provide information to start the pump to heat to your cylinder. This happens when the differential between the two sensors usually plus or minus 5 degrees will switch the pump to power. At this point all of your system components should ideally be working without pressure drops to encourage the best performance from your solar panel system. It therefore must be free from leaks. The pressure gauge should be showing a pressure level @ 2 bar, if your system has an indication below this then you may need to over hall your solar heating system, to check for leaks. This is done to improve/increase the temperature/pressure, ultimately capturing a greater solar gain. Your solar heating system contains glycol fluid at pressure within the collectors, this then is being powered back to the cylinder so as to provide a thermal temperature transfer. This is a separate coil within your cylinder where recharging the hot water system is done every time the collectors reach optimum or a pre set level programmed in by the controller. This ensures that the performance of your equipment is being used to its maximum efficiency.

Solar Fixings


K2 Solar Fixing Supplies WEB SHOP Providing Mounting Systems

One of the renewable industries leading photovoltaic mountings and associated variations, delivering multiple options using the K2 system, we can offer many solar panel on roof or ground mechanical fixing solutions.

K2 Component Parts

Mounting solar panels on a roof structure. Our kits can be used on Slate, Pan Tile, Concrete, corrugated or box metal profile roofs. Flat surface and ground mounted are also within our portfolio. Depending on the fixing arrangement we are able to provide equipment to match designed and manufactured out of high quality stainless steel to accept Slates, Pan tiled and Plain Tile. These are then fixed to rafters using stainless steel long life screws. Where corrugated fasteners are required, we offer the Rafter screw, designed for superior strength. These are available to fix to metal or wood purling.

Solar panel rails

are then fixed to secure a base for the modules. These are available in varying section sizes and lengths to accommodate the roof layout. In circumstances when a metal clad box profile roof requires an economical approach, we would offer the speed rail system. This is attached using the standard K2 equipment parts. All modules are held in place by the corrosion resistant aluminum quick easy fit clamps, manufactured in sizes to match any solar panel. High quality N rack ground mounted into concrete foundation projects. Sizes matched to mirror customers’ requests. Deliveries are calculated on weight and size of items to UK mainland postcodes. We reserve the right to increase courier charges to islands and inaccessible areas where delivery costs are higher than stated.

If you do not see the K2 Solar Fixing product you require via our web site presentation, please contact us and ask. Below you will find that we have listed the common fixing brackets used in domestic and commercial installations. Slate, plain tile, pan tiled and vario, rafter purling roofed, trapezoidal, speed fit, flat roof, ground mounted, plus all of the t bolts, nuts mid or end clamp fixings to match any solar panel mounting project. Large orders should alway ask us for the wholesale solar parts price list.

Solar Kits


A full range of home grid connected kits designed to match your individual designs, providing all equipment required to start generating your own house hold power requirements. Can be slate, and Marley style roof coverings or metallic or corrugated. We also provide ground mounted kits for those who are unable to roof mount. Kits are usually 4kw to fall in line with DNO regulations, you may also want to provide a percentage toward storage for when the need arises to draw energy free of charge.

Solar Powered Street Lighting


Dragons Breath provide LED lighting using solar panels and associated equipment which, has been designed in the UK specifically for dedicated areas that then require timed or dusk until dawn scenarios. Designed and assembled in the UK for use in the rural environment where power supplies are minimal or where customers have the need to illuminate a required area in situations where health and safety issues are paramount. These systems provide a green footprint for many requiring a reduction in carbon saving. All of our light units can provide a method of substituting existing sodium power and emit a minimum pollution to the environment. They are a clear sky alternative.

Solutions to correspond with vernacular choices associated with: car parks and walkways, avenues, equestrian, driveways and bridle paths, allotments, moorings and marinas, Schools, farms, golf clubs, swimming pools and hot tubs where mains power sources are inaccessible due to infrastructure not being available.

LED Street lights

Powered by refracted light, that passes through our solar panel system into deep cell long life battery systems, providing a long life. Each one of our efficiently powered light columns provides 40,000 - 50,000 hours of life that in excess of 10 years’ worth of use able energy savings. These are designed to cut the excessive use of mains power that is currently being diluted from the national grid system to power existing sodium street light units.

By using one of our light units, you will help to make existing urban light polluting Sodium Street lighting obsolete and a thing of the past. We hope that once tests have been carried out the solar powered options will be far more beneficial and a less expensive option for the local authorities in the future. Spend to save. Invest in the future.

Our Latest energy saving option is the all in one light unit which is a sealed unit, offering sensor controlled LED light to places

Solar Lights


We can provide LED lights for any application.

They are purchased separately to allow you to design your own project.

Each one of our products are designed to meet IP64 weather conditions.

Solar Flood Lights


Flood lights are an easy method to illuminate billboards, banners and signs by the use of solar power. We can offer bespoke products designed around your requirements. This can be completely self regulating dusk until dawn 12w solar powered flood lighting system.

K2 Solar Fixings


K2 Solar Fixing Supplies WEB SHOP Providing Mounting Systems

One of the renewable industries leading photovoltaic mountings and associated variations, delivering multiple options using the K2 system, we can offer many solar panel on roof or ground mechanical fixing solutions.

K2 Component Parts

Mounting solar panels on a roof structure. Our kits can be used on Slate, Pan Tile, Concrete, corrugated or box metal profile roofs. Flat surface and ground mounted are also within our portfolio. Depending on the fixing arrangement we are able to provide equipment to match designed and manufactured out of high quality stainless steel to accept Slates, Pan tiled and Plain Tile. These are then fixed to rafters using stainless steel long life screws. Where corrugated fasteners are required, we offer the Rafter screw, designed for superior strength. These are available to fix to metal or wood purling.

Solar panel rails

are then fixed to secure a base for the modules. These are available in varying section sizes and lengths to accommodate the roof layout. In circumstances when a metal clad box profile roof requires an economical approach, we would offer the speed rail system. This is attached using the standard K2 equipment parts. All modules are held in place by the corrosion resistant aluminum quick easy fit clamps, manufactured in sizes to match any solar panel. High quality N rack ground mounted into concrete foundation projects. Sizes matched to mirror customers’ requests. Deliveries are calculated on weight and size of items to UK mainland postcodes. We reserve the right to increase courier charges to islands and inaccessible areas where delivery costs are higher than stated.

Window Power Energy


Wind power generator products can be used for charging 24v energy into batteries in remote locations using 300w VAWT turbines for greater capacity.

Range are suited to situations where a 24 hours per day charge may be required to continuously run a charge to system components. We offer 3 bladed marine grade highly engineered qualities for trickle charge. Our specialty product is the VAWT which offers symmetry within its surroundings. It also uses turbulent air streams to create power. With the aid of a specially developed inverter can provide mains power energy at 230v.

This can deliver generated energy to run a small house, caravan, cabin, houseboat, allotments and many more areas where stored power is needed.

Solar Electricity Kits


Solar Electricity Fixing Systems

Panel systems, on roof flat roof or ground mounted solar energy kits for homes or farms.

 

We can provide kits to suit any requirement size . Each one of our kit packs, provide important quality features. Our stainless steel approach to fixing provides the lifetime guarantee, which we feel is required to meet with the Government feed in tariff, and Green Deal aspirations. The objective for most people is to have a solar product that actually works to its full potential. DB provides top range solar parts. All equivalent products are offered to meet with the stringent rules pertaining to TUV tests. Solar panels consequently have to stay in place during storms and severe weather in the UK.

K2 products make sure every product meets with the high standards.

High quality modules, premium ancillary equipment parts are used through our kits.

Our company can provide full traceability in the form as ISO9001, for every product sold, this makes sure we can provides integrity and true identity. All solar kits are assembled to order. We hope these will save you time and money on installation times.

Degree of security, in our opinion is important understanding we match our solar equipment kits to high quality modules through renewable energy industry development.

Solar Pannels


roof panels are developed renewable energy products which provide budget house branded PV generator modules, that are realistically priced with quality in mind. Payback is provided by the tier quality that performs above average. With integrity built into the products.

 

We supply high efficiency budget priced solar panels. These solar panels can deliver essential energy to run a house, caravan, cabin, houseboat, allotments, farms and many more areas where 230v power is needed.

Victron Energy Products


VICTRON ENERGY PRODUCTS

Please find our complete list of victron energy product available.

Support resources

Call Applegate +44 (0)345 600 7177