AKM Fabrications Ltd

Our 6 Leg Mobile Man Anchor has a total weight of 260kg and is suitable for most applications. It consists of a 6 leg 20kg central anchor point onto which the 20kg steel weights and 20kg rubber weights are added. The steel weights have 5mm rubber protection pads fitted, this prevents any possible damage to susceptible roof surfaces and provides better grip on all surfaces. Assembly is a quick and easy process. Then simply attach a safety harness and it's ready to use. To move the Mobile Man Anchor to a new location, a simple strip down and reassembly can be done in minutes

The 8 Leg version of the Mobile Man Anchor is only required on steel or PVC membrane roofs. At 340kg its extra weight prevents any possible movement of the anchor on the smoother surfaces of these roof surfaces. The components are exactly the same as our 6 leg product, with the addition of 2 extra steel weights, 2 extra rubber weights and an 8 leg central anchor point. . The steel weights have 5mm rubber protection pads fitted, this prevents any possible damage to susceptible roof surfaces and provides better grip on all surfaces.

The Cable Tray Stands are supplied in two base sizes: Small - 350mm long, and Large - 490mm long. They are supplied complete with 12mm threaded bars and tray support bar or uni-strut to meet your requirements

We also manufacture a full range of accessories for our rubbish chute to assist in the easy installation of the complete system. Including bespoke reinforced "Y" sections and support frames with spreader bars. The support frames are used to support the system at top roof level. Reinforced chutes can be made in any size or material to suit heavier duty applications

Evorail collapsible has been specifically designed to cater for Listed Buildings. The system solves the visual issue of freestanding guardrail. When not in use, it neatly folds down and cannot been seen from floor level. However, when maintenance teams need to erect the system for protection, it is easily folded back into the upright position and fixed using standard stainless steel wing nuts. Evorail collapsible is easy to handle in modular 10mtr sections which are connected together with pre-galvanised sleeves fixed with stainless steel grub screws

Evowalk is the solution for Composite and Built-Up Roof Systems. Our products can be used on all major composite roofing systems. Evowalk can be fitted either across or parallel to roof seams. All our Evowalk systems can be used in combination with our Evorail guardrail range, to provide a total solution to all roof safety and access requirements. When used with our EV fixing bracket installation time is reduced considerably when compared to standard fitting methods. The EV Fixing bracket is TEK screwed to the I beam and then either screwed or riveted onto the roof sheet. The brackets are supplied complete with a bonded sealing strip on the underside. These pads ensure that the watertight integrity of the roof is not compromised. In addition our unique I beam connector provides perfect alignment and strength to the completed system

Our Custom Made Frames are designed in-house to suit the required frame size and loading. They are easily assembled on-site in minutes and provide a cost effective solution to siting Air Handling Units onto roof substrate. Our re-cycled rubber feet provide protection to the roof surface to prevent any possible leaks and the feet assemblies can easily be removed for maintenance or re-surfacing purposes. We supply in Galvanised Steel as standard but can offer units powder coated to any RAL colour if required

Our Evorail Demarcation System is designed to provide an obvious and visible barrier to protect personnel from any potential danger, likely if they were to access areas close to roof edges or hazardous machinery. It is a Health and Safety requirement to provide a safe and designated route between the roof access point and place of work. Our demarcation system is a simple, low cost solution that ensures compliance with HSE and is simple to install

Our Ducting or Pipework Stands can be made to any height or width required. They are supplied with wide heavy duty feet to spread any excess loads, this protects the integrity of the roof such as membrane type surfaces. They provide excellent containment of H&V ducting or pipe work to protect against any potential trip hazards

Our Aluminium walkway is an alternative to our PVCu range. It uses serrated aluminium walkway panels to provide a safe, non-slip route to maintenance personnel. It can also benefit from the addition of toe board or our Aluminium Guardrail to either side, or both sides if required. It can be fitted to all roof surface types and is extremely strong and robust. It offers a long lasting solution to all roof access requirements.