AN Wallis and Co Ltd

The Number One Supplier For All Your Surge Protection, Earthing And Lightning Needs

TOTAL SYSTEM PROTECTION

Lightning Transient Overvoltage Protection for Mains Power

All mains power lines entering or leaving the building are prime routes for lightning and switching induced surges and overvoltages to enter the electrical and electronic systems. Due to the large cross sectional area of these cables high current and voltage surges can enter with minimal attenuation.

By fitting Wallis Surge Protection devices in parallel with the incoming mains, surges and overvoltages can be reduced to an acceptable level. Protection devices are available for single and three phase as well as three phase split busbar systems.

The Number One Supplier For All Your Earthing and Lightning Protection Needs

EARTHING  &  EQUIPOTENTIAL BONDINGEXTERNAL STRUCTURAL PROTECTION
  • Rods
  • Conductors
  • Connectors
  • Tapes
  • Earth Bars
  • Bonds
  • Clamps
  • Test Points
  • Plates
  • Air Rods
  • Marconite Compounds
  • Fixing
  • Bentonite Compounds
 

Filter products and services

  1. View all categories
  1. Bare Stranded Copper Conductors

    Bare Stranded Copper Conductors
    Wallis bare stranded copper conductor is used on both lightning protection and earthing systems. Available as soft drawn (copper wire that has been heat treated) and hard drawn (copper wire that has not been annealed after drawing).
  2. 'B' Bonds

    'B' Bonds
    This Wallis 'B' bond is used for bonding aluminium and copper tapes to flat metal surfaces.
  3. Bentonite

    Bentonite
    Bentonite is a moisture retaining clay used as an earth electrode back-fill to help lower soil resistivity. The clay is a sodium activated montmorillonite, which when mixed with water swells to many times its original volume. Bentonite can be supplied in granular or powder form. The granular form is easier to handle as the powder can cause dust in windy conditions. Granular is the preferred option for filling trenches as the substance can be mixed in the trench. Powder is the preferred option for pouring into bore holes to ensure the mixture is a thin enough consistency to reach the bottom of the hole.
  4. Bimetallic Connectors

    Bimetallic Connectors
    These connectors are used to join aluminium and copper tapes together. They are a neat and practical jointing method without the need for tinning, riveting or wrapping the joint. Fix using countersunk woodscrew 1 1/2" x No. 10 wall plug.
  5. Bitumen Felt DC Clips

    Bitumen Felt DC Clips
    For use on bitumen felt roofing only
  6. Bitumen Felt Roll

    Bitumen Felt Roll
    Supplied in rolls for use on asphalt roofs.
  7. Cable Shoes

    Cable Shoes
    Used to bond 8mm bare solid circular conductors to metal surfaces.
  8. Cable to Tape Connectors

    Cable to Tape Connectors
    This Wallis four-way connector is suitable for crossing over flat copper tape and bare stranded copper cable. It will also serve for making straight through joints and tee connections.
  9. 'C' Crimp Connectors

    'C' Crimp Connectors
    These range-taking 'C' Crimp Connectors are specifically designed for tap and parallel connections of stranded copper cables in earthing applications.
  10. Cleaning Solution (Acetone)

    Cleaning Solution (Acetone)
    Cleaning Solution (Acetone) 500ml spray applicator for cleaning lacquered roofing membranes