AN Wallis and Co Ltd
The Number One Supplier For All Your Surge Protection, Earthing And Lightning Needs
TOTAL SYSTEM PROTECTION
Lightning Transient Overvoltage Protection for Mains Power
All mains power lines entering or leaving the building are prime routes for lightning and switching induced surges and overvoltages to enter the electrical and electronic systems. Due to the large cross sectional area of these cables high current and voltage surges can enter with minimal attenuation.
By fitting Wallis Surge Protection devices in parallel with the incoming mains, surges and overvoltages can be reduced to an acceptable level. Protection devices are available for single and three phase as well as three phase split busbar systems.
The Number One Supplier For All Your Earthing and Lightning Protection Needs
EARTHING & EQUIPOTENTIAL BONDING | EXTERNAL STRUCTURAL PROTECTION |
|
|
|
|
|
|
|
|
|
|
|
|
|
Filter products and services
-
Green & Yellow PVC Insulating Tape
General-purpose insulating tape for electrical applications.Request a Quote Supplied by AN Wallis and Co Ltd -
Heavy Duty Earth Inspection Housings
The Wallis heavy duty earth housing is designed, shaped and sized to fit easily into brick paved walkways. The lip of the base makes a flush fit with standard-sized bricks making the housing blend in without the need for a cement surround. The housing will withstand loads of up to 6,000 kilograms and is suitable for most commercial and industrial applications. The lid locks into the base and can be opened with a standard flat screwdriver. The base has three built-in slots for locating earth bars.Request a Quote Supplied by AN Wallis and Co Ltd -
Interceptor Plates
These Wallis interceptor plates fit under the roof tile and are connected onto the lightning protection system. The square plate protrudes from the tile and provides the interception point.Request a Quote Supplied by AN Wallis and Co Ltd -
Interface Test Clamps
This Wallis clamp is used for connecting flat tape to solid circular conductor, for example where the lightning protection system has been designed in 8mm copper conductor but the connection to the earth rod is made using 25 x 3mm copper tape. It will also serve for making through joints and tee connections in 8mm solid circular conductor.Request a Quote Supplied by AN Wallis and Co Ltd -
Lead Covered Copper Tape
Material: Copper to BS EN 13601 (formerly BS 1432).Request a Quote Supplied by AN Wallis and Co Ltd -
Light Duty Air Rod Saddles
Light Duty Saddles are used to support air rods on flat roof surfaces.Request a Quote Supplied by AN Wallis and Co Ltd -
Light Duty Earth Inspection Housings
The Wallis light duty earth inspection housing has a maximum safe working load of 2,000 kilograms. It is UV stabilised against degradation by sunlight and non-brittle to prevent cold weather damage. The unique, detachable easy-locking lid ensures security of equipment as the locking mechanism can only be operated by the special key provided with the housing. The base has built-in slots for locating earth bars. Its lightweight feature allows easy handling, storage and transportation. The termination depth is increased 100% by simply locking two units together, allowing deeper earth electrode connections to be made.Request a Quote Supplied by AN Wallis and Co Ltd -
Low Resistance Earthing Compound
Wallis Low Res provides a permanent simple solution to substantially lower the resistance of an earthing system. It is a high performance low-resistance earthing compound which when mixed with cement and water forms a high strength electrically conductive concrete to last for the life of the system. Low Res is supplied in a fine granular form available in 25kg. It is widely used in earthing and grounding applications where permanent low resistance and high compressive strength solutions are required. By mixing Low Res with cement at a ratio of 2:1 the resulting concrete is electrically conductive whilst offering a solid electrical connection between the earthing system and the ground. Low Res is a non leaching, maintenance free stable earthing compound ideal for use in ground conditions where conductivity is very poor such as rock or shale. Low Res provides a permanent path for excellent conduction of current instead of attempting to employ large diameter difficult to drive earth rods. Low Res applications include static control for aircraft aprons and fuel tankers, RF and microwave screening and earthing for a wide variety of applications in Oil and Gas installations, Telecommunications industry, Defence Establishments, Rail and Underground installations, Electricity and Water Companies.Request a Quote Supplied by AN Wallis and Co Ltd -
LSOH Covered Copper Tape
Copper to BSEN 13601 (Formerly BS 1432) PVC Colours to BS 6746CRequest a Quote Supplied by AN Wallis and Co Ltd -
Metallic Cable Clips
Metallic cable clips secure the stranded copper conductor to the building surface. Fix using countersunk woodscrew 1 1/2" x No. 10 and No. 10 wall plug.Request a Quote Supplied by AN Wallis and Co Ltd