Choosing The Right Rotor And Stator for your Rendering Machine
9 March 2023
Rendering machines come in many shapes and sizes from Diesel machines capable of pumping 100 litres a minute to smaller electric machines perhaps requiring a little more control and therefore a lower output. The rotor and stator mechanism is a key element to consider when planning your project as you will want to match it to your machine, material (aggregate size) and desired pumping speed/pressure. The product spec sheet is your first port of call when it comes to understanding which rotor and stator works for you.
Generally the rotor and stator size reflects the size of your machine. A larger version will cope with bigger aggregate and has a greater material output. The size isn’t only an indicator of the machine size but also enables you to:
It is not only the size of the rotor and stator that influences the above factors but also the pitch (ridges/grooves on the rotor) and the shore (how soft/firm the stator is). For more information on how rotors and stators vary check out our blog here >
Below you’ll find some guidance on selecting the right rotor and stator for your rendering machine and material choice. Here are three of our popular render machines alongside the parts available for them:
Euromair MixPro 28
The Euromair MixPro 28 is a popular electric machine capable of mixing and pumping various products including roughcast, top coat, basecoat, monocouche and latex screed. The Euromair MixPro 28 is a continuous mixing pump whose pumping capabilities can be adjusted by changing the rotor and stator set up.
| Rotor & Stator | Material Output | Used to Pump |
| Mixer 13 | 10 Litres per minute | Roughcast and Top Coat |
| Mixer 26 (fitted to a new machines) | 16 Litres per minute | Basecoat and Monocouche |
| Mixer 32 | 30 Litres per minute | Latex Screed |
Euromair MixPro 50
The MixPro 50 is another great option for spraying render. This three-phase continuous mixing pump is compatible with a range of renders including Weber Pral M, Krend K1, Parex Monorex to name a few. The rotor and stator options for this machine include:
| Rotor & Stator | Material Output | Used to Pump |
| D4-3 | 14 Litres per minute | Roughcast |
| D6-3 (fitted to new machines) | 20 Litres per minute | Basecoat and Monocouche |
| D7-2.5 | 25 Litres per minute | Basecoat and Monocouche |
| D8-2 | 32 Litres per minute | Latex Screed |
Euromair X-Pro D80
The Euromair X-Pro D80 is a large diesel machine with much larger pumping capabilities with a 200 litre hopper so suitable for bigger projects. The batch mixer pump and sprayer is designed with a built in compressor and will cope with up to 6mm aggregate material. Here are the range of rotor and stator parts compatible with this machine:
| Rotor & Stator | Material Output | Used to Pump |
| 2L6 | 60 Litres per minute | Render & Grout |
| 2L6+++ (fitted to new machines) | 100 Litres per minute | Render & Grout |
| Map 9 | 320 Litres per minute | Flow Screed |
For more information or advice on your rotor and stator or more general queries with regards to your rendering machine, contact us on 01494 715472.