E-T-A Circuit Breakers Ltd

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Through selective disconnection the ESX10 responds much faster to overload or short circuit conditions than the switch-mode power supply. This is achieved by active current limitation. The ESX10 limits the highest possible current to values between 1.3 to 1.8 times the selected rated current of the circuit protector. Thus it is possible to switch on capacitive loads of up to 20,000 µF lamp loads, but they are disconnected only in the event of an overload or short circuit.

For optimal alignment with the characteristics of the application the current rating of the ESX10 can be selected in fixed values from 0.5 A - 12 A. Failure and status indication are provided by a multicolour LED and an integral short-circuit-proof status output or a potential-free signal contact.

The ESX10, with a width of only 12.5 mm, can be plugged into the E-T-A power distribution socket Module 17plus ensuring ease of installation and saving space in control cabinets.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
Without signal input
Without signal output, only ESX10-100
Rated voltage DC 24V
Current ratings: 0.5 - 12A

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
Without signal input
Without signal output
Rated voltage DC 24V
Current ratings: 0.5 - 12A
ATEX approved.

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
Without signal input
Signal output F (group signal, change-over) only ESX10-103
Rated voltage DC 24V
Current ratings: 0.5 - 12A

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
Without signal input
Signal output F (group signal, change-over)
Rated voltage DC 24V
Current ratings: 0.5 - 12A
ATEX approved.

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
Without signal input
Status output SF (+24 V = OK), only ESX10-104, ESX10-124
Rated voltage DC 24V
Current ratings: 0.5 - 12A

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
Without signal input
Status output SF
Rated voltage DC 24V
Current ratings: 0.5 - 12A
ATEX approved.

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
With control input IN+
Without signal output
Rated voltage DC 24V
Current ratings: 0.5 - 12A
ATEX approved.

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
With control input IN+
Signal output F (group signal, change-over)
Rated voltage DC 24V
Current ratings: 0.5 - 12A
ATEX approved.

Please click on the link, contact us or visit our website for further information.

Electronic circuit protector type ESX10 is designed to ensure selective disconnection of DC 24 V load systems.

DC 24 V power supplies, which are widely used in industry today, will shut down the output in the event of an overload with the result that one faulty load in the system can lead to complete disconnection of all loads. As well as an unidentified failure this also means stoppage of the whole system.

Electronic Circuit Protector for DC 24 V applications
Standard version, without physical isolation in the event of a failure
With control input IN+
Status output SF
Rated voltage DC 24V
Current ratings: 0.5 - 12A
ATEX approved.

Please click on the link, contact us or visit our website for further information.