Euroteck Systems UK Ltd

A 160kV X-Ray WorX SE reflection microfocus X-ray system in a long X-ray cabinet coupled with a digital flat panel is available to inspect small parts such as PCB’s etc. The long bed length of the 160kV MFX system allows large geometric magnification to be achieved meaning very small objects can be magnified to many times their original size. The high-power reflection MFX tube gives a JIMA resolution of 2µm.

A 160kV small X-ray cabinet system is available for real time inspection of small low- density items such as nylon blocks using an image intensifier to view the images. With this equipment, the captured images can be exported as still or movie files.

The SRE Max 320kV is capable of inspecting parts up to 700mm diameter x 1200mm tall to a maximum weight of 120kg. For volume inspection we can apply automatic defect recognition (ADR) software so the PC determines whether the part is acceptable or rejected based on the acceptance standard used. We can also compare defects in castings to reference images built into the Bosello BHT IP Extreme software. In the future we will be able to use this equipment to provide CT inspection.

Please do not hesitate to contact Euroteck Systems if you’d prefer to discuss your X-ray tube requirement.

The CF Series of high-voltage x-ray generators with between 1250W and 1800W options available, and with an array of output voltage configurations between 50KV up to 550KV. This series utilises variable frequency technology for precise and stable output, making it the perfect choice for CT and other applications which require an extremely precise and stable x-ray output.

Euroteck is a leading supplier of Industrial X-Ray Systems and equipment in the UK. With many years’ experience in non destructive testing (NDT), Euroteck have an extensive knowledge base for finding the best solution to a problem. Located in Tamworth, Staffs with excellent road and rail links, close to two international airports, Euroteck is ideally situated to provide a fast and efficient non destructive testing (NDT) service both in the UK and throughout Europe.

Computed Tomography or more commonly just CT is rapidly gaining acceptance as a non-destructive testing (NDT) method for the inspection of parts in the automotive, aerospace, casting and electronics industries to name but a few, each with its own set of challenges. Inspecting the parts with CT opens up potential new applications, such as evaluating internal defects and the dimensional measurement of internal structures.

A 160kV CP X-ray cabinet system is available for conventional X-ray inspection using either the Dürr NDT HD CR 35 NDT, Dürr NDT HD CR 43 NDT for computed radiography or the Dürr NDT DRC 2430 NDT for direct digital radiography. This equipment is suitable for plan view radiography with a FFD of around 1.3m.

The Gulmay CP Series provides excellent performance and reliability for high powered x-ray systems between 3000W or 4500W, and come in a range of output arrangements that start at 65kV and go to 450kV. High current CP series X-ray generators are also available for applications that demand extended mA operation. This series is the perfect solution for when a high dose rate is required and has been the go-to X-ray generator for system manufacturers and integrators across a broad range of applications such as NDT, security, gauging and radiotherapy for many years.

Digital Radiography (DR) or direct radiography or is simply another form of X-ray imaging. Digital Radiography systems use Flat Panel Detectors – FPD’s or Digital Detector Arrays – DDA’s. These names are interchangeable. These detectors take the place of conventional X-ray film. This gives advantages over X-ray film as the image is immediately available for preview, and as FPD’s have a wider dynamic range, they are more forgiving for over or under exposure, and less radiation can be used to produce an image of similar contrast to that achieved using conventional film radiography.