or Browse by category
Pinstructure Ltd

Pinstructure Ltd

Pinstructure Ltd

Pinstructure oversees the manufacture and distribution of fastener components by working with trusted global manufacturers. An SME family-run business based in Redditch, Worcestershire started in the 1980s.

Our production capacity includes high volume bespoke production as well as smaller volume. With a varied customer base comprising of individual start-ups to some of the larger multinational firms across a range of industries including Formula 1 motor racing, wind farms, agriculture, nuclear power, rail and the marine sector. 

Embracing innovation and diversifying complement where we excel best: quality and technical expertise. Maintaining quality standards is of the utmost importance – Pinstructure is accredited to ISO9001:2008 standard and is now in the process of working towards ISO9001:2015 certification

Our full range can be seen here. Our technical sales team are on hand to help!

In 2010 we formed a new division called Abbey Clamps strategically set up to focus and develop on Hose Clips and Clamps, which had long been a part of our range and had seen consistent growth.

Request a Quote

Filter products and services

  1. View all categories
  2. Clevis Pins
  3. Spring Pins

  1. Groove Pins DIN1475

    Groove Pins DIN1475
    • Part codeA48
    GP8 Third Length Centre Groove Pins are manufactured to DIN1475 and the base material is 11SMnPb30 Mild Steel. Our size range covers Inch diameters from 1/16” to 1” and Metric from 1mm to 25mm. Alternative variations include ISO8742 where length is measured as an overall dimension.
    Request a Quote Supplied by Pinstructure Ltd

  2. Groove Pins GP10

    Groove Pins GP10
    • Part codeA30
    GP10 Groove Pins are described as one-half length centre groove pins with an annular groove or gorge at each end. These parts are available in a full range of sizes but are made to order and are subject to minimum batch quantities.
    Request a Quote Supplied by Pinstructure Ltd

  3. Groove Pins ISO8743

    Groove Pins ISO8743
    • Part codeA45
    GP5 Half Length Centre Groove Pins are a variation on DIN1475 / Type E and the base material is 11SMnPb30 Mild Steel. Our size range covers Inch diameters from 1/16” to 1” and Metric from 1mm to 25mm. Alternative variations include ISO8743 where length is measured as an overall dimension.
    Request a Quote Supplied by Pinstructure Ltd

  4. Groove Studs DIN1476

    Groove Studs DIN1476
    • Part codeA33
    Round Head Groove Studs are manufactured to DIN1476 / ISO8746. Previously referred to as GS1A groove studs the full range of sizes and materials can be produced. This part is often used as an alternative to U-Type Hammer Drive self-tapping screws or our series A35 Drive Pins
    Request a Quote Supplied by Pinstructure Ltd

  5. Groove Studs DIN1477

    Groove Studs DIN1477
    • Part codeA34
    Countersunk Head Groove Studs are manufactured to DIN1477 / ISO8747. Previously referred to as GS2A groove studs, a full range of sizes and materials can be produced.
    Request a Quote Supplied by Pinstructure Ltd

  6. Group 2 Disc Springs DIN2093

    Group 2 Disc Springs DIN2093
    • Part codeF51A
    Group 2 Disc Spring to DIN2093
    Request a Quote Supplied by Pinstructure Ltd

  7. Group 3 Disc Spring DIN2093

    Group 3 Disc Spring DIN2093
    • Part codeF52A
    Group 3 Disc Spring to DIN2093
    Request a Quote Supplied by Pinstructure Ltd

  8. Half Saddle Clamps DIN72571

    Half Saddle Clamps DIN72571
    • Part codeA94
    Half Saddle Clamps DIN72571
    Request a Quote Supplied by Pinstructure Ltd

  9. Hammer Drive Pins

    Hammer Drive Pins
    • Part codeA35
    Drive Pins are more commonly known as U-Type self-tapping screws. Our standard range is manufactured from Mild Steel with Electro-Brass (EB) finish. Historically Drive Pins have been produced in Standard Wire Gauge diameters ranging from 00 Gauge up to 10 Gauge with lengths ranging from 1/8” to ½”.
    Request a Quote Supplied by Pinstructure Ltd

  10. Hard Copper Plain Washers

    Hard Copper Plain Washers
    • Part codeK62
    Hard Copper Washers are used in bolted applications that require good hard wearing copper and a large surface area to spread the bolting force. Available in Metric and Inch sizes, 3-12mm and 3/16" up to 5/8”. Special sizes can be manufactured to order.
    Request a Quote Supplied by Pinstructure Ltd