or Browse by category
Pinstructure Ltd

Pinstructure Ltd

Pinstructure Ltd

Pinstructure oversees the manufacture and distribution of fastener components by working with trusted global manufacturers. An SME family-run business based in Redditch, Worcestershire started in the 1980s.

Our production capacity includes high volume bespoke production as well as smaller volume. With a varied customer base comprising of individual start-ups to some of the larger multinational firms across a range of industries including Formula 1 motor racing, wind farms, agriculture, nuclear power, rail and the marine sector. 

Embracing innovation and diversifying complement where we excel best: quality and technical expertise. Maintaining quality standards is of the utmost importance – Pinstructure is accredited to ISO9001:2008 standard and is now in the process of working towards ISO9001:2015 certification

Our full range can be seen here. Our technical sales team are on hand to help!

In 2010 we formed a new division called Abbey Clamps strategically set up to focus and develop on Hose Clips and Clamps, which had long been a part of our range and had seen consistent growth.

Request a Quote

Filter products and services

  1. View all categories
  2. Clevis Pins
  3. Spring Pins

  1. Stainless Steel Taper Pins

    Stainless Steel Taper Pins
    • Part codeD02
    Stainless Metric Taper Pins are offered to DIN1B with a fine turned finish and are produced from 303/1.4305 Stainless Steel. Stainless Inch Taper Pins are offered to BS46 Part3 Class D with a fine turned finish and are produced from 303 Stainless Steel.
    Request a Quote Supplied by Pinstructure Ltd

  2. Steel Dowel DIN7m6

    Steel Dowel DIN7m6
    • Part codeP01
    DIN7m6 Metric Unhardened Mild Steel Dowels are produced with an ‘m6’ interference fit tolerance. Our standard metric diameter range is from 0.8mm up to 20mm diameter and lengths 3mm to 120mm are available. This range of unhardened pins is produced from material 1.0718 Mild steel
    Request a Quote Supplied by Pinstructure Ltd

  3. Steel Dowel ISO2338A

    Steel Dowel ISO2338A
    • Part codeR01
    ISO2338A Metric Unhardened Mild Steel Dowels are produced with an ‘m6’ interference fit tolerance. Our standard metric size range is from 0.8mm up to 20mm diameter and from 3mm to 120mm in length. This range of unhardened pins is produced from material 1.0718 Mild Steel and is offered with 15° chamfers at both ends, the nominal length being measured overall including the chamfers.
    Request a Quote Supplied by Pinstructure Ltd

  4. Steel Dowel ISO2338B

    Steel Dowel ISO2338B
    • Part codeS01
    ISO2338B Metric Unhardened Mild Steel Dowels are produced with a ‘h8’ push fit tolerance. Our standard metric size range is from 0.8mm up to 20mm diameter and from 3mm to 120mm in length. This range of unhardened pins is produced from material 1.0718 Mild Steel and is offered with 15° chamfers at both ends, the nominal length being measured overall including the chamfers
    Request a Quote Supplied by Pinstructure Ltd

  5. Straight Grease Nipples

    Straight Grease Nipples
    • Part codeA16
    Grease nipples are widely used in all industries which lubricated, moving machinery is to be found. In choosing a grease nipple for a particular task, consideration must be given to size, siting/accessibility, pressure and enviroment. We therefore offer these fittings in many angles, sizes, materials and shapes. Standard material is steel zinc plated and stainless steel however we can offer some sizes/angles in hardened steel, brass, 316 grade stainless steel and monel. Sizes are available in metric, various inch thread pitches.
    Request a Quote Supplied by Pinstructure Ltd

  6. Support Washers

    Support Washers
    • Part codeC62
    Support Washers Metric
    Request a Quote Supplied by Pinstructure Ltd

  7. Taper Pin Selections

    Taper Pin Selections
    • Part codeTaper Pin Selection
    Mild Steel Taper Pins Metric or Inch. Available in Stainless Steel
    Request a Quote Supplied by Pinstructure Ltd

  8. T Bolt Clamps

    T Bolt Clamps
    • Part codeT78
    T Bolt Clamps, 19mm bandwidth
    Request a Quote Supplied by Pinstructure Ltd

  9. Thru Hardened Dowel Pins DIN6325

    Thru Hardened Dowel Pins DIN6325
    • Part codeT01
    DIN6325 Metric Hardened & Ground Dowels are produced to a precise Interference fit. Our standard metric size range is from 1mm up to 25mm diameter and is produced from material 1.3505 (100cr6) Through Hardened to HRC58-62. This pin is configured to have a radius at one end and a ‘crown’ at the other – a crown can be more easily described as a radius on top of a chamfer. Metric sizes are offered with an ‘m6’ tolerance band.
    Request a Quote Supplied by Pinstructure Ltd

  10. Thru Locking Pins

    Thru Locking Pins
    • Part codeA82
    Thru Locking Pins can be used to quickly be inserted into a hole in a shaft to retain part of the assembly. The advantage these pins have over the linch pins is that they can be inserted anywhere up and down the shaft the application dictates with a positive engagement of the keep whereas the linch has to be installed on the end. To make these locking pins even more versatile they come in a range of keeps. The pin body is cold headed steel with a steel keep all zinc plated, sizes vary from 6.3 x 50mm up to 11 x 100mm. The keep variations are half round and half round with a tab lift also a square keep and a square keep with a tab lift. The tab lift are designed to make assembly and dissassembly easier.
    Request a Quote Supplied by Pinstructure Ltd