60S Compression system has been specifically designed to create the best compression. The system is made up of the HPE-2A hydraulic power pack and the EP-60S remote 60 ton compression head. The HPE-2A has a Oil delivery: 2.6 litres/min at 0 - 20 bars 0.5 litres/min at 20 - 700 bars. Engine; Air cooled. 4 cycle petrol engine 2.0 ps/3,600 rpm, unleaded petrol -Reservoir capacity: 2.2 litres. The HPE-2 is a single acting engine driven hydraulic pump suitable for single acting presses for transmission line use. This pump is one of the most sophisticated on today's market. It builds pressure up to 700 bars automatically, and returns the engine RPM to an idle. Wired remote control allows operator complete control. Oil volume is large enough to operate a 60 ton class single acting compression head. Electric circuit boards are completely modulated for easy replacement and repair HPE-2A has the new FUJI HEAVY'S four cycle engine EH09-2D. This engine meets the emissions control in accordance with EPA PHASE2 and CARB TIER 2. Improving fuel cost by 15%. he 10 000psi output created is suitable for the EP-60s Remote 60 ton compression head has Ram stroke: 38.5mm between dies. Oil volume required: 303cc -Force at die face: 517kN The EP-60S is a 60ton output compression head for full tension , transmission line connectors and requires and external single acting 700bar pumping source. Single acting means hydraulically advancing the ram to build the tonnage and spring retraction of the ram. When ordering dies please specify the diameter of the manufacturers connectors or Alcan die no. ie A-9, A-10, A-11, A-12 the system is supplied with 5 metre 10 000psi Izumi hydraulic hose and parker couplings. the total weight of the system is 58kg.
