or Browse by category
Cross and Morse

Cross and Morse

Here at Cross and Morse, we are established manufacturers and distributors of a wide range of mechanical transmission products. Our extensive manufacturing capability gives us the ability to turn, gear cut, grind, keyway, drill and tap, broach, mill, hone, shot blast, induction harden teeth and chemical black. Expert engineering and technical support is available our drawing office use the latest Autodesk®  Inventor™ software . At Cross and Morse, we utilise modern CNC equipment to maintain our high quality of service. We hold a large stock of Power Transmission components which gives us a unique position of being both a stockist and a manufacturer.

Request a Quote

Filter products and services

  1. View all categories
  2. Ball Bearings
  3. Bevel Gear
  4. Disc Couplings
  5. Internal Spur Gears
  6. Mechanical Clutches
  7. Pulleys
  8. Roller Chains
  9. Set Screw Clamps
  10. Shaft Clamps
  11. Spherical Bearings
  12. Spider Couplings
  13. Sprockets
  14. Spur Gears
  15. Timing Belts
  16. Torque Motors

  1. Type GFK - Ball and Roller Bearing Sprag Clutches

    Type GFK - Ball and Roller Bearing Sprag Clutches
    • Part codeType GFK - Ball and Roller Bearing Sprag Clutches
    The GFK clutch combines a sprag unit with a roller bearing and ball bearing into a unit which dimensionally equates to a 59 series bearing. The design provides high torque capacity and bearing strength within a compact unit.
    Request a Quote Supplied by Cross and Morse

  2. Types AGF and AGFN Clutches assembled with End Flanges

    Types AGF and AGFN Clutches assembled with End Flanges
    • Part codeTypes AGF and AGFN Clutches assembled with End Flanges
    Combination of AGF Series roller ramp clutches with a selection of end flanges provides a versatile range of clutches complete with own bearing support and integral lubrication system. Flanges can be combined as required to suit most applications, the following combinations being most common.
    Request a Quote Supplied by Cross and Morse

  3. Types AGF and AGFN Roller Ramp Clutches

    Types AGF and AGFN Roller Ramp Clutches
    • Part codeTypes AGF and AGFN Roller Ramp Clutches
    AGF and AGFN freewheels contain their own bearings, to centre inner and outer races. The outer race is tapped to enable fitting of a range of standard end flanges, but can equally be adapted to fit gears, or other driven equipment to suit special applications. Combination with standard end flanges or flexible couplings provides complete unit, with its own lubrication, enabling easy fitting to drive equipment.
    Request a Quote Supplied by Cross and Morse

  4. Types CKK & CSK Sprag Clutches

    Types CKK & CSK Sprag Clutches
    • Part codeTypes CKK & CSK Sprag Clutches
    Clutch types CKK and CSK combine individually sprung sprags with a deep groove ball bearing to provide a compact, low cost high torque freewheel. Used for backstop and overrun applications, these clutches provide the ideal, low cost, solution where space is restricted.
    Request a Quote Supplied by Cross and Morse

  5. V Belt Pulley - Pilot bored

    V Belt Pulley - Pilot bored

    At Cross and Morse we can supply a wide range of industrial and commercial customers with high quality timing belt pulleys, timing belts and related products. Our pilot bore V belt pulleys are manufactured according to ISO 4183 and DIN 2211-3 norms. Material: cast iron EN-GJL-200 UNI EN 1561 Treatment: phosphate. SPA, SPB, SPC and SPZ available from stock.

    Use our Crossbore service for re-boring, keywaying, drilling and tapping to your requirements.

    For further information visit Cross and Morse online, call our team on 0121 360 0155 or send an enquiry to sales@crossmorse.com.

     

    V Belt Pulleys with pilot bore from Cross+Morse

    SPA, SPB, SPC & SPZ series.

    SPA available from 40mm to 630mm PCD number of grooves from 1 to 6 please enquire.

    SPB available from 63mm to 630mm PCD number of grooves from 1 to 6 please enquire.

    SPC available from 100mm to 630mm PCD number of grooves from 1 to 6 please enquire.

    SPZ available from 50mm to 315mm PCD number of grooves from 1 to 3 please enquire.

    Request a Quote Supplied by Cross and Morse

  6. V Belt Pulley - taper bored

    V Belt Pulley - taper bored

    At Cross and Morse we can supply a wide range of industrial and commercial customers with high quality timing belt pulleys, timing belts and related products. Our taper bore V belt pulleys are manufactured according to ISO 4183 and DIN 2211-3 norms. Material: cast iron EN-GJL-200 UNI EN 1561 Treatment: phosphate. For further information visit Cross and Morse online, call our team on 0121 360 0155 or send an enquiry to sales@crossmorse.com.

     

    V-belt pulleys with taper bore

    All pulleys are statically balanced and suitable for peripheric speed up to 35 m/s.

    Four types are available: - SPA, SPB, SPC & SPZ series

    SPA available from 63mm to 1000mm PCD, number of grooves from 1 to 6 please enquire.

    SPB available from 100mm to 1250mm PCD, number of grooves from 1 to 10 please enquire.

    SPC available from 200mm to 1250mm PCD, number of grooves from 2 to 10 please enquire.

    SPZ available from 50mm to 800mm PCD, number of grooves from 1 to 8 please enquire.

    Request a Quote Supplied by Cross and Morse

  7. V Belt Pulley - taper bored

    V Belt Pulley - taper bored

    At Cross and Morse we can supply a wide range of industrial and commercial customers with high quality timing belt pulleys, timing belts and related products. Our taper bore V belt pulleys are manufactured according to ISO 4183 and DIN 2211-3 norms. Material: cast iron EN-GJL-200 UNI EN 1561 Treatment: phosphate. For further information visit Cross and Morse online, call our team on 0121 360 0155 or send an enquiry to sales@crossmorse.com.

     

    V-belt pulleys with taper bore

    All pulleys are statically balanced and suitable for peripheric speed up to 35 m/s.

    Four types are available: - SPA, SPB, SPC & SPZ series

    SPA available from 63mm to 1000mm PCD, number of grooves from 1 to 6 please enquire.

    SPB available from 100mm to 1250mm PCD, number of grooves from 1 to 10 please enquire.

    SPC available from 200mm to 1250mm PCD, number of grooves from 2 to 10 please enquire.

    SPZ available from 50mm to 800mm PCD, number of grooves from 1 to 8 please enquire.

    Request a Quote Supplied by Cross and Morse

  8. V Belt Pulley - taper bored

    V Belt Pulley - taper bored

    At Cross and Morse we can supply a wide range of industrial and commercial customers with high quality timing belt pulleys, timing belts and related products. Our taper bore V belt pulleys are manufactured according to ISO 4183 and DIN 2211-3 norms. Material: cast iron EN-GJL-200 UNI EN 1561 Treatment: phosphate. For further information visit Cross and Morse online, call our team on 0121 360 0155 or send an enquiry to sales@crossmorse.com.

     

    V-belt pulleys with taper bore

    All pulleys are statically balanced and suitable for peripheric speed up to 35 m/s.

    Four types are available: - SPA, SPB, SPC & SPZ series

    SPA available from 63mm to 1000mm PCD, number of grooves from 1 to 6 please enquire.

    SPB available from 100mm to 1250mm PCD, number of grooves from 1 to 10 please enquire.

    SPC available from 200mm to 1250mm PCD, number of grooves from 2 to 10 please enquire.

    SPZ available from 50mm to 800mm PCD, number of grooves from 1 to 8 please enquire.

    Request a Quote Supplied by Cross and Morse

  9. V Belt Pulley - taper bored

    V Belt Pulley - taper bored

    At Cross and Morse we can supply a wide range of industrial and commercial customers with high quality timing belt pulleys, timing belts and related products. Our taper bore V belt pulleys are manufactured according to ISO 4183 and DIN 2211-3 norms. Material: cast iron EN-GJL-200 UNI EN 1561 Treatment: phosphate. For further information visit Cross and Morse online, call our team on 0121 360 0155 or send an enquiry to sales@crossmorse.com.

     

    V-belt pulleys with taper bore

    All pulleys are statically balanced and suitable for peripheric speed up to 35 m/s.

    Four types are available: - SPA, SPB, SPC & SPZ series

    SPA available from 63mm to 1000mm PCD, number of grooves from 1 to 6 please enquire.

    SPB available from 100mm to 1250mm PCD, number of grooves from 1 to 10 please enquire.

    SPC available from 200mm to 1250mm PCD, number of grooves from 2 to 10 please enquire.

    SPZ available from 50mm to 800mm PCD, number of grooves from 1 to 8 please enquire.

    Request a Quote Supplied by Cross and Morse

  10. V Belt Pulley - taper bored

    V Belt Pulley - taper bored

    At Cross and Morse we can supply a wide range of industrial and commercial customers with high quality timing belt pulleys, timing belts and related products. Our taper bore V belt pulleys are manufactured according to ISO 4183 and DIN 2211-3 norms. Material: cast iron EN-GJL-200 UNI EN 1561 Treatment: phosphate. For further information visit Cross and Morse online, call our team on 0121 360 0155 or send an enquiry to sales@crossmorse.com.

     

    V-belt pulleys with taper bore

    All pulleys are statically balanced and suitable for peripheric speed up to 35 m/s.

    Four types are available: - SPA, SPB, SPC & SPZ series

    SPA available from 63mm to 1000mm PCD, number of grooves from 1 to 6 please enquire.

    SPB available from 100mm to 1250mm PCD, number of grooves from 1 to 10 please enquire.

    SPC available from 200mm to 1250mm PCD, number of grooves from 2 to 10 please enquire.

    SPZ available from 50mm to 800mm PCD, number of grooves from 1 to 8 please enquire.

    Request a Quote Supplied by Cross and Morse