E-T-A Circuit Breakers Ltd

The Electronic Timer Relay ETR10 is a solid state relay and provides three major functions within a single device:

- timer function
- relay function
- protective function

The numerous timer functions can be selected within very wide limits and the protective function can also be adjusted very flexibly to the application.
The ETR10 is available in a 4-pin or 7-pin Mini automotive standard relay enclosure with ratings from 1 A through 30 A. It is suitable for vehicles with 12 V DC or 24 V DC electrical system voltage.

Electronic Timer Relay
Protective function: with trip curve (protected)
Analogue output U(I) or PWM
Input/output 1: output
Input/output 2: output
Socket design: 7-pin-socket
Software ID: 0100 relay with extended functional range
Current ratings:

• 1A
• 2A
• 3A
• 5A
• 7.5A
• 10A
• 15A
• 20A
• 25A sealed as standard
• 30A sealed as standard

The Electronic Timer Relay ETR10 is a solid state relay and provides three major functions within a single device:

- timer function
- relay function
- protective function

The numerous timer functions can be selected within very wide limits and the protective function can also be adjusted very flexibly to the application.
The ETR10 is available in a 4-pin or 7-pin Mini automotive standard relay enclosure with ratings from 1 A through 30 A. It is suitable for vehicles with 12 V DC or 24 V DC electrical system voltage.

Electronic Timer Relay
Protective function: with trip curve (protected)
Analogue output U(I) or PWM
Input/output 1: output
Input/output 2: output
Socket design: 4-pin socket, protective sealing (up to 20A)
Software ID: 0100 relay with extended functional range
Current ratings:

• 1A
• 2A
• 3A
• 5A
• 7.5A
• 10A
• 15A
• 20A
• 25A sealed as standard
• 30A sealed as standard

The Electronic Timer Relay ETR10 is a solid state relay and provides three major functions within a single device:

- timer function
- relay function
- protective function

The numerous timer functions can be selected within very wide limits and the protective function can also be adjusted very flexibly to the application.
The ETR10 is available in a 4-pin or 7-pin Mini automotive standard relay enclosure with ratings from 1 A through 30 A. It is suitable for vehicles with 12 V DC or 24 V DC electrical system voltage.

Electronic Timer Relay
Protective function: with trip curve (protected)
Analogue output U(I) or PWM
Input/output 1: output
Input/output 2: output
Socket design: 7-pin socket, protective sealing (up to 20A)
Software ID: 0100 relay with extended functional range
Current ratings:

• 1A
• 2A
• 3A
• 5A
• 7.5A
• 10A
• 15A
• 20A
• 25A sealed as standard
• 30A sealed as standard

The electronic standard relay ESR10 is a solid state power relay combining two functions in a single unit.

- solid state relay function
- electronic overcurrent protection

The relay has been designed for 4-pole standard automotive relay sockets to ISO 7588. It is suitable for DC12V on-board electrical systems and is rated 50A. Up to now two separate components were connected to one functional unit in a load circuit to allow remote switching and protection of loads:

- an electro-mechanical relay or solid state relay which is powered via the control cable and then closes the circuit by means of the integral contact or power semi-conductor
- an additional protective element (circuit breaker or fuse) Ð providing line or equipment protection in the event of a failure.

By combining two functions in one component the ESR10 helps to minimise the number of plug-in connections in a circuit and thus reduces the risk of a failure. In addition the ESR10 is remotely Ðresettable after overload tripping.

The electronic standard relay ESR10 is a solid state power relay combining two functions in a single unit.

- solid state relay function
- electronic overcurrent protection

The relay has been designed for 4-pole standard automotive relay sockets to ISO 7588. It is suitable for DC12V on-board electrical systems and is rated 50A. Up to now two separate components were connected to one functional unit in a load circuit to allow remote switching and protection of loads:

- an electro-mechanical relay or solid state relay which is powered via the control cable and then closes the circuit by means of the integral contact or power semi-conductor.
- an additional protective element (circuit breaker or fuse) providing line or equipment protection in the event of a failure.

By combining two functions in one component the ESR10 helps to minimise the number of plug-in connections in a circuit and thus reduces the risk of a failure. In addition the ESR10 is remotely Ðresettable after overload tripping.

Electronic standard relay protective function: without trip curve (not protected)
Type of enclosure: Maxi
Terminal design: standard automotive, 4-pole (ISO)
Load circuit and control circuit: high-side-switch (HSS), negative (GND) control
Sub type: 00
Rated voltage: DC 12 V
Current rating: 50A.

The electronic standard relay ESR10 is a solid state power relay combining two functions in a single unit.

- solid state relay function
- electronic overcurrent protection

The relay has been designed for 4-pole standard automotive relay sockets to ISO 7588. It is suitable for DC12V on-board electrical systems and is rated 50A. Up to now two separate components were connected to one functional unit in a load circuit to allow remote switching and protection of loads:

- an electro-mechanical relay or solid state relay which is powered via the control cable and then closes the circuit by means of the integral contact or power semi-conductor.
- an additional protective element (circuit breaker or fuse) providing line or equipment protection in the event of a failure.

By combining two functions in one component the ESR10 helps to minimise the number of plug-in connections in a circuit and thus reduces the risk of a failure. In addition the ESR10 is remotely Ðresettable after overload tripping.

Electronic standard relay protective function: without trip curve (not protected)
Type of enclosure: Maxi
Terminal design: standard automotive, 4-pole (ISO)
Load circuit and control circuit: high-side-switch (HSS), positive control
Sub type: 00
Rated voltage: DC 12 V
Current rating: 50A.

The electronic standard relay ESR10 is a solid state power relay combining two functions in a single unit.

- solid state relay function
- electronic overcurrent protection

The relay has been designed for 4-pole standard automotive relay sockets to ISO 7588. It is suitable for DC12V on-board electrical systems and is rated 50A. Up to now two separate components were connected to one functional unit in a load circuit to allow remote switching and protection of loads:

- an electro-mechanical relay or solid state relay which is powered via the control cable and then closes the circuit by means of the integral contact or power semi-conductor.
- an additional protective element (circuit breaker or fuse) providing line or equipment protection in the event of a failure.

By combining two functions in one component the ESR10 helps to minimise the number of plug-in connections in a circuit and thus reduces the risk of a failure. In addition the ESR10 is remotely Ðresettable after overload tripping.

Electronic standard relay protective function: with trip curve (protected)
Type of enclosure: Maxi
Terminal design: standard automotive, 4-pole (ISO)
Load circuit and control circuit: high-side-switch (HSS), negative (GND) control
Sub type: 00
Rated voltage: DC 12 V
Current rating: 50A.

The electronic standard relay ESR10 is a solid state power relay combining two functions in a single unit.

- solid state relay function
- electronic overcurrent protection

The relay has been designed for 4-pole standard automotive relay sockets to ISO 7588. It is suitable for DC12V on-board electrical systems and is rated 50A. Up to now two separate components were connected to one functional unit in a load circuit to allow remote switching and protection of loads:

- an electro-mechanical relay or solid state relay which is powered via the control cable and then closes the circuit by means of the integral contact or power semi-conductor.
- an additional protective element (circuit breaker or fuse) providing line or equipment protection in the event of a failure.

By combining two functions in one component the ESR10 helps to minimise the number of plug-in connections in a circuit and thus reduces the risk of a failure. In addition the ESR10 is remotely Ðresettable after overload tripping.

Electronic standard relay protective function: with trip curve (protected)
Type of enclosure: Maxi
Terminal design: standard automotive, 4-pole (ISO)
Load circuit and control circuit: high-side-switch (HSS), positive control
Sub type: 00
Rated voltage: DC 12 V
Current rating: 50A.

We provide comprehensive and globally renowned solutions for your electronic systems. For the design and production of circuit breakers for equipment protection, we provide superior services, unmatched throughout the field.

We also offer the widest range of products for circuit protection in every industrial application.

ETA - http://www.e-t-a.co.uk